CoChat

The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.

Application of Hydraulic Geometry to High Gradient Rivers in Southern Ecuador

Carrillo, V. M., Petrie, J. E., Cisneros, F. E., Timbe, L. M. · 2021 · Water Resources Research

Abstract

Using hydraulic geometry (HG) theory, we investigated three rivers typical of the Ecuadorian mountainous region with longitudinal slopes ranging from 0.8% to 10% and coarse bed material with d 50 ranging from 3 to 54 mm and values of d 90 up to 908 mm. Extensive field measurements were performed to characterize geometric and hydraulic properties at 33 sites. Using these field data, at‐a‐station HG relationships were obtained for top width, average flow depth, and average flow velocity. Dimensional and dimensionless downstream HG relations were obtained for these parameters as well as the channel bed slope using the bankfull discharge estimated with at‐a‐station HG. The correlation coefficients indicate that the dimensionless equations adequately represent the observed data for all quantities with the exception of slope. In addition to a low correlation coefficient, the exponent on non‐dimensional discharge was small in the downstream HG relation for slope. This small exponent indicates that slope is not dependent on discharge. Based on this finding, the non‐dimensional HG relations were reformulated using both dimensionless discharge and bed slope as independent variables. These new relations show improved correlation coefficients and demonstrate the role of slope in determining channel width, flow depth, and average velocity in high gradient rivers.

Overview

Integrity signals

Registry

Crossref · 10.1029/2019wr026756

Cites

50 of 50 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 50 references

Research works printed but not linked: 4

  1. ASTM C136‐01, 2001, ASTM C136‐01, Standard Test Method for sieve analysis of fine and coarse aggregates
  2. Bray D. I.(1973).Regime relations for Alberta gravel‐bed rivers. In Fluvial processes and sedimentation (pp. 440–452).
  3. Bray D. I., 1982, Gravel‐Bed Rivers
  4. Buckalew J. O., 1998, Water resources assessment of Ecuador

Cited by

Metadata

Authors
Carrillo, V. M., Petrie, J. E., Cisneros, F. E., & Timbe, L. M.
Affiliations
  • University of Cuenca (EC)
  • United States Army Corps of Engineers (US)
Corresponding author
Carrillo, V. M.
Venue
Water Resources Research
Published
2021-03
Volume
57
Issue
3
ISSN
  • 0043-1397 (ISSN-L)
  • 1944-7973
OpenAlex
W3130253833
Cited by
7
References
50
Citations by year
2025: 1 · 2024: 1 · 2023: 1 · 2022: 2 · 2021: 2
FWCI
0.96
Type
journal article
Language
en
Open access
closed
Licence
Locations
  • Water Resources Research (publishedVersion)
  • Repositorio Institucional (Universidad de Cuenca) (submittedVersion)
Topics
  • Physical Sciences › Earth and Planetary Sciences › Earth-Surface Processes › Hydrology and Sediment Transport Processes
  • Physical Sciences › Engineering › Civil and Structural Engineering › Hydraulic flow and structures
  • Physical Sciences › Environmental Science › Water Science and Technology › Hydrology and Watershed Management Studies
Keywords
hydraulic geometry, mountain streams, bed slope, channel width, flow depth, mean velocity, bankfull discharge, bed material size, Ecuadorian Andes

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.