The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Heat flow from Cajon Pass, fault strength, and tectonic implications
Abstract
Measured heat flow at Cajon Pass is consistent with predictions based on local site conditions and regional heat flow. With observations now ranging to a depth of 3½ km, there is still no evidence for significant frictional heating anywhere on the San Andreas fault. The result supports the view, long suggested from heat flow studies, that the fault is weak in spite of estimates based on Byerlee's law, isotropic strength, and hydrostatic fluid pressure that suggest a strength several times larger. Recent evidence (Zoback et al., 1987; Mount and Suppe, 1987) that the maximum principal stress might be almost normal to the San Andreas fault would support the weak‐fault model and add constraints over and above those imposed by heat flow; e.g., local friction coefficients μ ≲ 0.1 or fluid pressures along the fault greater than lithostatic (λ > 1), compared to μ ≲ 0.2 or fluid pressure greater than twice hydrostatic (λ > 0.74) for the heat flow constraint alone. These constraints are a challenge to existing models of faulting, and they are stimulating promising new points of view. The balance of plate boundary forces around a weak fault depends on the basal traction coupling the seismic layer to the rest of the system; heat flow limits the coupling force across the fault to an insignificant ∼ 10 11 N/m. The weak fault also precludes significant near‐field basal driving tractions, but it permits a large basal drag force which could result in a highly stressed seismic layer offering appreciable resistance to plate motion through its base. Such tractions could develop progressively if the fault surface weakens as it evolves; if they exist, they should cause an observable reduction in shear stress resolved in the fault direction and a rotation of principal axes as the fault is approached; if they do not exist, the seismic layer rides passively on the lower crust. Heat flow measurements should detect whether such basal tractions might be associated with basal decoupling and flow. Coupling at the base of the seismic layer is controlled by the rheological profile, the usual representation of which raises three questions in applications to the San Andreas fault zone. First, the linear frictional portion through the seismic layer implies a resisting force on the fault much greater than the heat flow limit permits. Second, the large stresses implied for the temperature‐sensitive ductile layer might be unsustainable; they could lead to shear heating and weakening at plate boundary strain rates. Third, in the ductile layer the stress is sensitive to whether deformation is concentrated in narrow vertical mylonite zones, as sometimes assumed in models of the earthquake cycle, or more broadly distributed by bulk flow in a deep‐crustal “asthenosphere.” Horizontal basal shear stresses are of the same order as vertical strike‐slip stresses near the base of the seismic layer; they could result in bulk flow or horizontal detachment leading to a different pattern of long‐term stress, strain rate, and dissipation and a requirement for decoupling and basal drag on the seismic layer in the near field. Results from the San Andreas fault taken with long‐standing speculation about the orthogonal relation between oceanic transform faults and extensional spreading centers suggest that strike‐slip transform faults might be anomalously weak in both continental and oceanic settings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Transform fault earthquakes in the North Atlantic: Source mechanisms and depth of faulting
Bergman, E. A., & Solomon, S. C. (1988) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb093ib08p09027 · Cited by 104
Cited by
Zoback, M. D. (2007) · Cambridge University Press eBooks · doi:10.1017/cbo9780511586477 · Cited by 1,541
The Mechanics of Earthquakes and Faulting
Scholz, C. H. (2019) · Cambridge University Press eBooks · doi:10.1017/9781316681473 · Cited by 910
David, C., Wong, T.-F., Zhu, W., & Zhang, J. (1994) · pure and applied geophysics · doi:10.1007/bf00874337 · Cited by 682
Frictional slip of granite at hydrothermal conditions
Blanpied, M. L., Lockner, D. A., & Byerlee, J. D. (1995) · Journal of Geophysical Research: Solid Earth · doi:10.1029/95jb00862 · Cited by 605
Thermal constraints on the zone of major thrust earthquake failure: The Cascadia Subduction Zone
Hyndman, R. D., & Wang, K. (1993) · Journal of Geophysical Research: Solid Earth · doi:10.1029/92jb02279 · Cited by 559
Metadata
- Authors
- Lachenbruch, A. H., & Sass, J. H.
- Venue
- Journal of Geophysical Research: Solid Earth
- Publisher
- American Geophysical Union (AGU)
- Published
- 1992-04-10
- Volume
- 97
- Issue
- B4
- Pages
- 4995-5015
- ISSN
- 0148-0227 (ISSN-L)
- OpenAlex
- W2069530996
- Cited by
- 265
- References
- 1
- FWCI
- 13.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Heat flow from Cajon Pass, fault strength, and tectonic implications. https://app.cochat.ai/papers/10.1029/91jb01506
- The paper
- Lachenbruch, A. H., & Sass, J. H. (1992). Heat flow from Cajon Pass, fault strength, and tectonic implications. Journal of Geophysical Research: Solid Earth. https://doi.org/10.1029/91jb01506
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.