Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 316

The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.

Tensile fracture of rock at high confining pressure: Implications for dike propagation

Rubin, Allan M.·1993·Journal of Geophysical Research: Solid Earth

Abstract

Field observations indicate that zones of inelastic deformation produced at the tips of propagating dikes can be much larger than those produced at the tips of tensile cracks in laboratory experiments. This is in direct conflict with the concept that fracture toughness and fracture energy are rock properties, independent of crack size and loading configuration. A Barenblatt model that treats fracture resistance as an internal cohesive stress acting at the crack tip is used to investigate the effect of confining pressure on rock tensile failure. When the confining pressure exceeds the cohesive strength of the rock, as it does at depths greater than several hundred meters, Linear Elastic Fracture Mechanics is inapplicable and the near‐tip stress field of a propagating crack is determined by the crack size and loading configuration as well as by rock properties. As inelastic deformation depends upon the near‐tip stress field, it follows that fracture energy may also depend upon crack size and loading configuration. For a propagating dike, the near‐tip stress field is dominated by the large suction acting within a small (∼several meter) cavity at the tip generated by viscous flow of magma within the dike. Perturbations to the ambient stress are on the order of the cavity suction and act over regions on the order of the cavity length. The tip cavity pressure may be maintained by exsolution of magmatic volatiles or by influx of host rock pore fluids; inelastic deformation is enhanced by the latter. For a tip cavity pressure maintained by influx of pore fluids, the pore pressure exceeds the least compressive stress off the dike plane, even while it equals the least compressive stress at the dike tip. This can lead to tensile failure off the dike plane and the formation of observed dike‐parallel joints. Shear stresses scale with the cavity suction and may produce shear failure off the dike plane; such deformation is generally enhanced if the dike is intruded perpendicular to the least compressive stress. For sills intruded parallel to bedding, shear failure in the form of bedding plane slip can lead to the observed blunting and fingering of the intrusion front. Because the tip cavity grows with dike size, the energy consumed by rock fracture also increases with dike size and is potentially as significant for large dikes as for small dikes, a view not adopted by existing fluid mechanical models of dike propagation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1029/93jb01391

Cites

21 of 21 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 21 references

Cited by

See all 316

Metadata

Authors
Rubin, A. M.
Venue
Journal of Geophysical Research: Solid Earth
Published
1993-09-10
Volume
98
Issue
B9
Pages
15919-15935
ISSN
0148-0227 (ISSN-L)
OpenAlex
W1998030591
Cited by
316
References
21
FWCI
20.93
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Tensile fracture of rock at high confining pressure: Implications for dike propagation. https://app.cochat.ai/papers/10.1029/93jb01391
The paper
Rubin, A. M. (1993). Tensile fracture of rock at high confining pressure: Implications for dike propagation. Journal of Geophysical Research: Solid Earth. https://doi.org/10.1029/93jb01391

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.