CoChat
Cited by 181

The DOI matches its Crossref record.

Dispersive Transport Dynamics in a Strongly Coupled Groundwater‐Brine Flow System

Oldenburg, Curtis M., Pruess, Karsten · 1995 · Water Resources Research

Abstract

Many problems in subsurface hydrology involve the flow and transport of solutes that affect liquid density. When density variations are large (>5%), the flow and transport are strongly coupled. Density variations in excess of 20% occur in salt dome and bedded‐salt formations which are currently being considered for radioactive waste repositories. The widely varying results of prior numerical simulation efforts of salt dome groundwater‐brine flow problems have underscored the difficulty of solving strongly coupled flow and transport equations. We have implemented a standard model for hydrodynamic dispersion in our general purpose integral finite difference simulator, TOUGH2. The residual formulation used in TOUGH2 is efficient for the strongly coupled flow problem and allows the simulation to reach a verifiable steady state. We use the model to solve two classic coupled flow problems as verification. We then apply the model to a salt dome flow problem patterned after the conditions present at the Gorleben salt dome, Germany, a potential site for high‐level nuclear waste disposal. Our transient simulations reveal the presence of two flow regimes: (1) recirculating and (2) swept forward. The flow dynamics are highly sensitive to the strength of molecular diffusion, with recirculating flows arising for large values of molecular diffusivity. For pure hydrodynamic dispersion with parameters approximating those at Gorleben, we find a swept‐forward flow field at steady state rather than the recirculating flows found in previous investigations. The time to steady state is very sensitive to the initial conditions, with long time periods required to sweep out an initial brine pool in the lower region of the domain. Dimensional analysis is used to demonstrate the tendency toward brine recirculation. An analysis based on a dispersion timescale explains the observed long time to steady state when the initial condition has a brine pool in the lower part of the system. The nonlinearity of the equations and the competing effects of dispersion and gravity make this variable‐density problem a challenge for any numerical simulation method.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1029/94wr02272

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Oldenburg, C. M., & Pruess, K.
Venue
Water Resources Research
Published
1995-02
Volume
31
Issue
2
Pages
289-302
ISSN
  • 0043-1397 (ISSN-L)
  • 1944-7973
OpenAlex
W2149566633
Cited by
181
References
0
FWCI
21.56
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.