The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Estimation of the complete stress tensor to 8 km depth in the KTB scientific drill holes: Implications for crustal strength
Abstract
For many years, in situ stress in the brittle crust has been measured at relatively shallow depth and related to the mechanical behavior of the crust as inferred from laboratory studies and faulting theory. A continuous profile of the magnitudes and orientations of the three principal stresses has been estimated to depths of 7.7 km and 8.6 km in the German Continental Deep Drilling Program (KTB). This was achieved by hydraulic fracturing tests at relatively shallow depth (1–3 km), estimates of the magnitude of the least horizontal principal stress provided by modified hydraulic fracturing experiments at 6 km and 9 km depths, and analysis of compressional (breakouts) and tensile (drilling‐induced tensile wall fractures) failures of the borehole wall over nearly the entire depth of the KTB borehole. The orientation of the maximum horizontal principal stress was found to be uniform with depth with an orientation of N160°±10°E, which is consistent with the average orientation found throughout western Europe. The only significant change in stress orientation was observed directly below a major fault zone crosscutting the borehole. The profile of stress magnitudes we have obtained demonstrates that to a depth of 8 km, the state of stress in the brittle crust in southern Germany is in frictional equilibrium. That is, the ratio of shear to normal stress as resolved on preexisting faults which are well‐oriented to the in situ stress field is comparable to their frictional strength based on predictions of Coulomb faulting theory for a coefficient of friction of about 0.7 and near‐hydrostatic pore pressure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Byerlee, J. (1978) · pure and applied geophysics · doi:10.1007/bf00876528 · Cited by 4,029
The mechanics of earthquakes and faulting
(1990) · Choice Reviews Online · doi:10.5860/choice.28-1579 · Cited by 3,569
First‐ and second‐order patterns of stress in the lithosphere: The World Stress Map Project
Zoback, M. L. (1992) · Journal of Geophysical Research: Solid Earth · doi:10.1029/92jb00132 · Cited by 1,891
Self-citationLimits on lithospheric stress imposed by laboratory experiments
Brace, W. F., & Kohlstedt, D. L. (1980) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb085ib11p06248 · Cited by 1,814
Strength of the lithosphere: Constraints imposed by laboratory experiments
Kohlstedt, D. L., Evans, B., & Mackwell, S. J. (1995) · Journal of Geophysical Research: Solid Earth · doi:10.1029/95jb01460 · Cited by 1,603
Gephart, J. W., & Forsyth, D. W. (1984) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb089ib11p09305 · Cited by 1,224
Tectonic analysis of fault slip data sets
Angelier, J. (1984) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb089ib07p05835 · Cited by 1,178
Stress and temperature in the bending lithosphere as constrained by experimental rock mechanics
Goetze, C., & Evans, B. (1979) · Geophysical Journal International · doi:10.1111/j.1365-246x.1979.tb02567.x · Cited by 891
State of stress in the conterminous United States
Zoback, M. L., & Zoback, M. (1980) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb085ib11p06113 · Cited by 879
Self-citationThe mechanics of earthquakes and faulting
Savage, J. C. (1991) · Physics of the Earth and Planetary Interiors · doi:10.1016/0031-9201(91)90167-g · Cited by 750
Cited by
Zoback, M. D. (2007) · Cambridge University Press eBooks · doi:10.1017/cbo9780511586477 · Cited by 1,541
Self-citationBürgmann, R., & Dresen, G. (2008) · Annual Review of Earth and Planetary Sciences · doi:10.1146/annurev.earth.36.031207.124326 · Cited by 1,150
How faulting keeps the crust strong
Townend, J., & Zoback, M. D. (2000) · Geology · doi:10.1130/0091-7613(2000)028<0399:hfktcs>2.3.co;2 · Cited by 1,020
Self-citationThe Mechanics of Earthquakes and Faulting
Scholz, C. H. (2019) · Cambridge University Press eBooks · doi:10.1017/9781316681473 · Cited by 910
Time-dependent cracking and brittle creep in crustal rocks: A review
Brantut, N., Heap, M. J., Meredith, P. G., & Baud, P. (2013) · Journal of Structural Geology · doi:10.1016/j.jsg.2013.03.007 · Cited by 706
Metadata
- Authors
- Brudy, M., Zoback, M. D., Fuchs, K., Rummel, F., & Baumgärtner, J.
- Venue
- Journal of Geophysical Research: Solid Earth
- Publisher
- American Geophysical Union (AGU)
- Published
- 1997-08-10
- Volume
- 102
- Issue
- B8
- Pages
- 18453-18475
- ISSN
- 0148-0227 (ISSN-L)
- OpenAlex
- W2083678379
- Cited by
- 489
- References
- 26
- FWCI
- 35.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Estimation of the complete stress tensor to 8 km depth in the KTB scientific drill holes: Implications for crustal strength. https://app.cochat.ai/papers/10.1029/96jb02942
- The paper
- Brudy, M., Zoback, M. D., Fuchs, K., Rummel, F., & Baumgärtner, J. (1997). Estimation of the complete stress tensor to 8 km depth in the KTB scientific drill holes: Implications for crustal strength. Journal of Geophysical Research: Solid Earth. https://doi.org/10.1029/96jb02942
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.