The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Highly anisotropic P3HT films with enhanced thermoelectric performance via organic small molecule epitaxy
Open accessAbstract
Conducting polymers are potential candidates for thermoelectric (TE) applications owing to their low thermal conductivity, non-toxicity and low cost. However, the coil conformation and random aggregation of polymer chains usually degrade electrical transport properties, thus deteriorating TE performance. In this work, we fabricated poly(3-hexylthiophene) (P3HT) films with highly oriented morphology using 1,3,5-trichlorobenzene (TCB), an organic small-molecule, as a template for polymer epitaxy under a temperature gradient crystallization process. The resulting P3HT molecules, which were confirmed to be highly anisotropic by a combination of scanning electron microscopy, atomic force microscopy, polarizing microscope, polarized Raman spectroscopy, and two-dimensional-grazing incidence X-ray diffraction (GIXRD) analysis, not only markedly reduced the conjugated defects along the polymer backbone, but also effectively increased the degree of electron delocalization. These combined phenomena produced an efficient, 1D path for carrier movement and therefore resulted in enhanced carrier mobility in the TCB-treated P3HT films. The maximum values of the electrical conductivity and Seebeck coefficient were 320 S cm−1 and 269 μV K−1, respectively. Consequently, the maximum TE power factor and ZT value at 365 K reached 62.4 μW mK−2 and 0.1, respectively, in the parallel direction of the TCB-treated P3HT film. To the best of our knowledge, these are the highest values reported for pure P3HT TE materials. The method of using organic small-molecule epitaxy to generate highly anisotropic polymer films is expected to be valid for many conducting polymers. A process for stretching twisted polymer chains into ordered fibers can benefit production of low-cost materials that harvest heat losses. Most thermoelectric energy converters are made from inorganic semiconductors. Conductive polymers, however, are an attractive alternative because of their simple manufacturing requirements and intrinsic thermal insulating properties. Lidong Chen from the Shanghai Institute of Ceramics and co-workers have developed a way to reduce the defects that often plague plastic thermoelectrics with a dissolvable organic template. The team co-crystallized the conductive polymer poly(3-hexylthiophene) with small, trichlorobenzene-based molecules that solidify into needle-like structures under a temperature gradient. The aromatic stacking forces within the trichlorobenzene crystals lock the polymer chains into elongated positions that persist after template removal. Experiments on the resulting poly(3-hexylthiophene) filaments revealed near-record thermoelectric conversion efficiencies for this material. Herein, we fabricated pure poly(3-hexylthiophene) (P3HT) film with highly oriented morphology using a small-molecule 1,3,5-trichlorobenzene (TCB) as the template for polymer epitaxy with a temperature gradient crystallization process. The strong π–π conjugated interactions as well as the very close matching between the repeat distance of the thiophene units in P3HT and the repeat distance of TCB molecules have successfully induced the epitaxy process, allowing the P3HT polymer chains to lock onto the lattice of TCB, forming highly ordered P3HT chains in the direction parallel to the fiber axis. As a result, the electrical conductivity in the direction parallel to the fiber axis was significantly improved. The maximum thermoelectric power factor and ZT value at 365 K reached 62.4 μW mK-2 and 0.1 in the parallel direction of the TCB-treated P3HT film.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P. (2013) · Nature Materials · doi:10.1038/nmat3635 · Cited by 1,688
Cited by
Flexible Thermoelectric Materials and Generators: Challenges and Innovations
Wang, Y., Yang, L., Shi, X., Shi, X., Chen, L., Dargusch, M. S., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807916 · Cited by 751
Self-citationCarbon‐Nanotube‐Based Thermoelectric Materials and Devices
Blackburn, J. L., Ferguson, A. J., Cho, C., & Grunlan, J. C. (2018) · Advanced Materials · doi:10.1002/adma.201704386 · Cited by 684
Thermoelectric materials and applications for energy harvesting power generation
Petsagkourakis, I., Tybrandt, K., Crispin, X., Ohkubo, I., Satoh, N., & Mori, T. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1530938 · Cited by 570
Flexible thermoelectrics based on ductile semiconductors
Yang, Q., Yang, S., Qiu, P., Peng, L., Wei, T.-R., Zhang, Z., Shi, X., & Chen, L. (2022) · Science · doi:10.1126/science.abq0682 · Cited by 518
Self-citationDoping Approaches for Organic Semiconductors
Scaccabarozzi, A. D., Basu, A., Aniés, F., Liu, J., Zapata-Arteaga, O., Warren, R., Firdaus, Y., Nugraha, M. I., Lin, Y., Campoy-Quiles, M., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00581 · Cited by 468
Metadata
- Authors
- Qu, S., Yao, Q., Wang, L., Chen, Z., Xu, K., Zeng, H., Shi, W., Zhang, T., Uher, C., & Chen, L.
- Venue
- NPG Asia Materials
- Published
- 2016-07
- Volume
- 8
- Issue
- 7
- Pages
- e292-e292
- ISSN
- 1884-4049 (ISSN-L)
- 1884-4057
- OpenAlex
- W2498402263
- Cited by
- 180
- References
- 1
- FWCI
- 5.97
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.