The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Probing the limits of metal plasticity with molecular dynamics simulations
Open accessAbstract
Ordinarily, the strength and plasticity properties of a metal are defined by dislocations—line defects in the crystal lattice whose motion results in material slippage along lattice planes. Dislocation dynamics models are usually used as mesoscale proxies for true atomistic dynamics, which are computationally expensive to perform routinely. However, atomistic simulations accurately capture every possible mechanism of material response, resolving every “jiggle and wiggle” of atomic motion, whereas dislocation dynamics models do not. Here we present fully dynamic atomistic simulations of bulk single-crystal plasticity in the body-centred-cubic metal tantalum. Our goal is to quantify the conditions under which the limits of dislocation-mediated plasticity are reached and to understand what happens to the metal beyond any such limit. In our simulations, the metal is compressed at ultrahigh strain rates along its [001] crystal axis under conditions of constant pressure, temperature and strain rate. To address the complexity of crystal plasticity processes on the length scales (85–340 nm) and timescales (1 ns–1μs) that we examine, we use recently developed methods of in situ computational microscopy to recast the enormous amount of transient trajectory data generated in our simulations into a form that can be analysed by a human. Our simulations predict that, on reaching certain limiting conditions of strain, dislocations alone can no longer relieve mechanical loads; instead, another mechanism, known as deformation twinning (the sudden re-orientation of the crystal lattice), takes over as the dominant mode of dynamic response. Below this limit, the metal assumes a strain-path-independent steady state of plastic flow in which the flow stress and the dislocation density remain constant as long as the conditions of straining thereafter remain unchanged. In this distinct state, tantalum flows like a viscous fluid while retaining its crystal lattice and remaining a strong and stiff metal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
Stukowski, A. (2010) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/18/1/015012 · Cited by 16,608
Self-citationChristian, J. W., & Mahajan, S. (1995) · Progress in Materials Science · doi:10.1016/0079-6425(94)00007-7 · Cited by 3,603
Kinetics of flow and strain-hardening
Mecking, H., & Kocks, U. F. (1981) · Acta Metallurgica · doi:10.1016/0001-6160(81)90112-7 · Cited by 2,814
The onset of twinning in metals: a constitutive description
Meyers, M. A., Vöhringer, O., & Lubarda, V. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00300-7 · Cited by 1,695
2 Structure identification methods for atomistic simulations of crystalline materialsPreprint
Stukowski, A. (2016) · Cited by 1,405
Self-citationMaximum entropy production principle in physics, chemistry and biology
Martyushev, L. M., & Seleznev, V. D. (2006) · Physics Reports · doi:10.1016/j.physrep.2005.12.001 · Cited by 943
Multiplication Processes for Slow Moving Dislocations
Frank, F. C., & Read, W. T. (1950) · Physical Review · doi:10.1103/physrev.79.722 · Cited by 612
Enabling strain hardening simulations with dislocation dynamics
Arsenlis, A., Cai, W., Tang, M., Rhee, M., Oppelstrup, T., Hommes, G., Pierce, T. G., & Bulatov, V. V. (2007) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/15/6/001 · Cited by 537
Self-citationDynamic transitions from smooth to rough to twinning in dislocation motion
Marian, J., Cai, W., & Bulatov, V. V. (2004) · Nature Materials · doi:10.1038/nmat1072 · Cited by 327
Self-citation
Cited by
Thompson, A. P., Aktulga, H. M., Berger, R., Bolintineanu, D. S., Brown, W. M., Crozier, P. S., in 't Veld, P. J., Kohlmeyer, A., Moore, S. G., Nguyen, T. D., et al. (2022) · Computer Physics Communications · doi:10.1016/j.cpc.2021.108171 · Cited by 12,598
An overview of tailoring strain delocalization for strength-ductility synergy
Wu, H., & Fan, G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100675 · Cited by 536
Machine Learning Methods for Small Data Challenges in Molecular Science
Dou, B., Zhu, Z., Merkurjev, E., Ke, L., Chen, L., Jiang, J., Zhu, Y., Liu, J., Zhang, B., & Wei, G.-W. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00189 · Cited by 499
Metadata
- Authors
- Zepeda-Ruiz, L. A., Stukowski, A., Oppelstrup, T., & Bulatov, V. V.
- Venue
- Nature
- Published
- 2017-09-27
- Volume
- 550
- Issue
- 7677
- Pages
- 492-495
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2341068027
- Cited by
- 460
- References
- 12
- FWCI
- 17.28
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Probing the limits of metal plasticity with molecular dynamics simulations. https://app.cochat.ai/papers/10.1038/nature23472
- The paper
- Zepeda-Ruiz, L. A., Stukowski, A., Oppelstrup, T., & Bulatov, V. V. (2017). Probing the limits of metal plasticity with molecular dynamics simulations. Nature. https://doi.org/10.1038/nature23472
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.