CoChat

Photonic crystals possessing multiple Weyl points and the experimental observation of robust surface states

Open access
Chen, Wen-Jie, Xiao, Meng, Chan, C. T. · 2016 · Nature Communications

The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index; 10 of the 14 sources its claims cite were checked for support.

Abstract

Abstract Weyl points, as monopoles of Berry curvature in momentum space, have captured much attention recently in various branches of physics. Realizing topological materials that exhibit such nodal points is challenging and indeed, Weyl points have been found experimentally in transition metal arsenide and phosphide and gyroid photonic crystal whose structure is complex. If realizing even the simplest type of single Weyl nodes with a topological charge of 1 is difficult, then making a real crystal carrying higher topological charges may seem more challenging. Here we design, and fabricate using planar fabrication technology, a photonic crystal possessing single Weyl points (including type-II nodes) and multiple Weyl points with topological charges of 2 and 3. We characterize this photonic crystal and find nontrivial 2D bulk band gaps for a fixed k z and the associated surface modes. The robustness of these surface states against k z -preserving scattering is experimentally observed for the first time.

Overview

CoChat Summary

## TL;DR

The paper designs and fabricates a microwave photonic crystal that hosts single, double, and triple Weyl points, including type-II Weyl points, using planar PCB technology. It also reports the first experimental observation of surface states in a Weyl system that are robust against kz-preserving scattering.

## Key findings

  • The photonic crystal exhibits single Weyl points at K/K′ with topological charges of −1 and +1 at 12.25 GHz and 9.94 GHz, respectively, and the same charges appear at K′ by C6 symmetry.
  • The structure also supports double Weyl points at Γ with charges of ±2, described as superpositions of two single Weyl points; the paper states this is the first time a real structure was designed and fabricated to exhibit double Weyl points with charges higher than 1.
  • The design contains triple Weyl points with topological charge 3 near 16.95 GHz, protected by C6 symmetry.
  • Robust chiral surface transport was measured experimentally: at θ = 35°, transmission overlapped for samples with 0, 1, 2, and 4 missing rods in the range 12.2 to 12.65 GHz; at θ = 50°, robust transmission was observed from 12.3 to 13 GHz.

## Methods

  • The authors designed a 3D hexagonal microwave photonic crystal by stacking 60 PCBs (about 32.4 cm thick in total) with copper cladding, metal cylinders, and chiral Y-shaped slots to break mirror and inversion symmetries and induce interlayer coupling.
  • They used full-wave simulations (COMSOL Multiphysics v.4.4) and symmetry/topological analysis to identify Weyl points, calculate Chern numbers from rotational eigenvalues, and predict surface dispersions.
  • Experiments included bulk transmission with adjustable incidence angle to scan kz, and surface transmission measurements on samples with and without defects to test backscattering robustness.

## Limitations

  • The paper states that direct detection of the multiple Weyl points was challenging because the bulk modes near these nodal points had low excitation efficiency.
  • It also says the experimentally observed robust-transport bandwidth was narrower than the band gap predicted by bulk band structure, attributed to the finite beam width of the incident wave packet.
  • The text makes evident that the study is in the microwave regime and uses a specific PCB-based geometry, so the reported experimental setup is specialized to that platform (evident from the Methods).

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/ncomms13038

Cites

60 of 60 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Realization of Weyl points in an electromagnetic system by introducing interlayer coupling. (a) Unit cell of a single-layer system built from a hexagonal array of perfect electric conductor (PEC) cylinders bounded by two PEC slabs. This can be realized with metal-coated PCBs that are pierced through by a hexagonal array of aluminium rods. PCBs stacked in the z direction form a 3D photonic crystal. (b) Multilayer system built from PCBs stacked in the z direction. Interlayer couplings are introduced by the Y-shaped slots on two sides of the PCBs. (c) Top view of the unit cell (dashed hexagon) of the multilayer system. Blue and red areas highlight the Y-shaped slots on the upper surface and the lower surface of the PCBs. (d) Reciprocal space of a hexagonal lattice. Since the photonic crystal has translational symmetry along the z direction, kz is a good quantum number. The system with a fixed kz has a 2D band structure in the reduced Brillouin zone (grey plane in d). Chern numbers are well defined for each kz slice. Weyl points can be viewed as the phase transition points between the kz slices with different Chern numbers. (e) Bulk band structure in the kz=0 plane. The structure has several Weyl points with different charges (in different colours). (f) Bulk band structure in the kz=0.05π/d plane. (g–i). Dispersion along the z direction at , and , respectively. Bands with different rotational eigenvalues are plotted in different colours. Since a change in rotational eigenvalue results in a change in the band (gap) Chern number, each crossing point in g or h is a Weyl point whose charge depends on the ratio between the rotational eigenvalues of two intersecting bands. Four Weyl points between the 4th and 5th bands, which induce the jumps in the Chern number of the 5th band in j, are highlighted in g. (j) Chern numbers of the 5th gap (red solid line) and the 5th band (black dashed line) as a function of kz, the jump in which implies the topological charge of associated Weyl points.
Figure 1 Realization of Weyl points in an electromagnetic system by introducing interlayer coupling. (a) Unit cell of a single-layer system built from a hexagonal array of perfect electric conductor (PEC) cylinders bounded by two PEC slabs. This can be realized with metal-coated PCBs that are pierced through by a hexagonal array of aluminium rods. PCBs stacked in the z direction form a 3D photonic crystal. (b) Multilayer system built from PCBs stacked in the z direction. Interlayer couplings are introduced by the Y-shaped slots on two sides of the PCBs. (c) Top view of the unit cell (dashed hexagon) of the multilayer system. Blue and red areas highlight the Y-shaped slots on the upper surface and the lower surface of the PCBs. (d) Reciprocal space of a hexagonal lattice. Since the photonic crystal has translational symmetry along the z direction, kz is a good quantum number. The system with a fixed kz has a 2D band structure in the reduced Brillouin zone (grey plane in d). Chern numbers are well defined for each kz slice. Weyl points can be viewed as the phase transition points between the kz slices with different Chern numbers. (e) Bulk band structure in the kz=0 plane. The structure has several Weyl points with different charges (in different colours). (f) Bulk band structure in the kz=0.05π/d plane. (g–i). Dispersion along the z direction at , and , respectively. Bands with different rotational eigenvalues are plotted in different colours. Since a change in rotational eigenvalue results in a change in the band (gap) Chern number, each crossing point in g or h is a Weyl point whose charge depends on the ratio between the rotational eigenvalues of two intersecting bands. Four Weyl points between the 4th and 5th bands, which induce the jumps in the Chern number of the 5th band in j, are highlighted in g. (j) Chern numbers of the 5th gap (red solid line) and the 5th band (black dashed line) as a function of kz, the jump in which implies the topological charge of associated Weyl points.CC BY · PubMed Central
Figure 2 Band structure of a C3-symmetric Weyl photonic crystal. (a) Unit cell of the crystal where the PEC cylinder is replaced by a triangular rod, reducing the symmetry to C3. (b) Band structure in the plane of kz=0. All three double Weyl points still lie at Γ. The quadratic dispersions in the kx–ky plane are also shown near these double Weyl points. (c) Band structure from −A to A, showing the linear dispersion of the double Weyl points in the z direction.
Figure 2 Band structure of a C3-symmetric Weyl photonic crystal. (a) Unit cell of the crystal where the PEC cylinder is replaced by a triangular rod, reducing the symmetry to C3. (b) Band structure in the plane of kz=0. All three double Weyl points still lie at Γ. The quadratic dispersions in the kx–ky plane are also shown near these double Weyl points. (c) Band structure from −A to A, showing the linear dispersion of the double Weyl points in the z direction.CC BY · PubMed Central
Figure 3 Double Weyl points breaking into single Weyl points due to symmetry breaking. (a) Unit cell of the crystal breaking C3 symmetry where the PEC cylinder in is replaced by an elliptical cylinder.(b) Corresponding Brillouin zone. Blue solid line highlights the path of the k-point when calculating the dispersion in (c). The upper M point, which is related to the lower M point by a reciprocal lattice vector, lies on the Γ−K′ direction. (c) Band structure in the plane of kz=0. Each of the three double Weyl points at Γ splits into two single Weyl points. Only three of the six single Weyl points are shown (the band crossing points between the second and third bands, the fourth and fifth bands, and the sixth and seventh bands). The other three single Weyl points can be inferred by applying C2 rotation about the axis of the elliptical cylinder. (d) and (e) show the linear dispersions near the Weyl point between the fourth and fifth bands along the y and z directions, respectively. Interestingly, this tilted Weyl point at 10.6 GHz is in fact a type-II Weyl point having a finite density of states.
Figure 3 Double Weyl points breaking into single Weyl points due to symmetry breaking. (a) Unit cell of the crystal breaking C3 symmetry where the PEC cylinder in is replaced by an elliptical cylinder.(b) Corresponding Brillouin zone. Blue solid line highlights the path of the k-point when calculating the dispersion in (c). The upper M point, which is related to the lower M point by a reciprocal lattice vector, lies on the Γ−K′ direction. (c) Band structure in the plane of kz=0. Each of the three double Weyl points at Γ splits into two single Weyl points. Only three of the six single Weyl points are shown (the band crossing points between the second and third bands, the fourth and fifth bands, and the sixth and seventh bands). The other three single Weyl points can be inferred by applying C2 rotation about the axis of the elliptical cylinder. (d) and (e) show the linear dispersions near the Weyl point between the fourth and fifth bands along the y and z directions, respectively. Interestingly, this tilted Weyl point at 10.6 GHz is in fact a type-II Weyl point having a finite density of states.CC BY · PubMed Central
Figure 4 Triple Weyl points along the Γ–A direction. Two red open circles highlight the triple Weyl points with a topological charge of +3. Other crossing points (solid circles) between different representations also exist on this C6 axis. These crossing points carry topological charges of ±1 or ±2, which are indicated by the colours of the circles. Note that the single Weyl points at ∼16.5 GHz, marked by light blue circles, are type-II Weyl points as well.
Figure 4 Triple Weyl points along the Γ–A direction. Two red open circles highlight the triple Weyl points with a topological charge of +3. Other crossing points (solid circles) between different representations also exist on this C6 axis. These crossing points carry topological charges of ±1 or ±2, which are indicated by the colours of the circles. Note that the single Weyl points at ∼16.5 GHz, marked by light blue circles, are type-II Weyl points as well.CC BY · PubMed Central
Figure 5 Surface dispersion between the Weyl photonic crystal and the PEC. (a) Configuration of the Weyl photonic crystal bounded by a PEC slab. (b) Calculated surface dispersion in the surface Brillouin zone. For clarity, only half of the Brillouin zone (kz∈[−0.5 π/d,0.5 π/d]) is plotted. Projected bulk states are plotted in grey, while the surface states are plotted in colour. The two linear cones of bulk states lying at the kz=0 line are due to the two Weyl points at K and K′ (where the 5th and 6th bands intersect) with a topological charge of −1. The two Weyl points at H and H′ with a charge of +1, which lie at the kz=π line, are not shown. (c–e) Surface dispersions at kz=−0.05π/d, kz=0 and kz=0.05π/d, respectively, where the blue lines denote the surface states.
Figure 5 Surface dispersion between the Weyl photonic crystal and the PEC. (a) Configuration of the Weyl photonic crystal bounded by a PEC slab. (b) Calculated surface dispersion in the surface Brillouin zone. For clarity, only half of the Brillouin zone (kz∈[−0.5 π/d,0.5 π/d]) is plotted. Projected bulk states are plotted in grey, while the surface states are plotted in colour. The two linear cones of bulk states lying at the kz=0 line are due to the two Weyl points at K and K′ (where the 5th and 6th bands intersect) with a topological charge of −1. The two Weyl points at H and H′ with a charge of +1, which lie at the kz=π line, are not shown. (c–e) Surface dispersions at kz=−0.05π/d, kz=0 and kz=0.05π/d, respectively, where the blue lines denote the surface states.CC BY · PubMed Central
Figure 6 Surface-projected band when (a) kz=0.7π/d, (b) kz=0.8π/d, (c) kz=0.9π/d and (d) kz=π/d. The two pink solid circles highlight the Weyl points between the fourth and fifth bands at H and H′.
Figure 6 Surface-projected band when (a) kz=0.7π/d, (b) kz=0.8π/d, (c) kz=0.9π/d and (d) kz=π/d. The two pink solid circles highlight the Weyl points between the fourth and fifth bands at H and H′.CC BY · PubMed Central
Figure 7 Robust surface states between the Weyl photonic crystal and the PEC. For a fixed nonzero kz, the surface only supports surface states in one direction. Hence the surface states are robust against scattering that preserves kz. (a) Simulated Ez field pattern when four PEC rods (shown as black solid circles) near the surface are removed. Electromagnetic (EM) waves with kz=0.3π/d and frequency of 12.6 GHz hit the photonic crystal from the left. (b) Field pattern for the case without defect. (c) Field pattern in the presence of a PEC bar. Since both kinds of defects in a and c are periodic in the z direction and kz is conserved, EM waves can pass through or wrap around the defects without backscattering. (d) Field pattern when EM waves with frequency of 11.5 GHz hit the photonic crystal. Wave with frequency outside the band gap can propagate in the bulk crystal. In a–d, the upper surface of the Weyl photonic crystal is bounded by PEC while the other three surfaces (left, right and bottom) are surrounded by air where EM wave can propagate.
Figure 7 Robust surface states between the Weyl photonic crystal and the PEC. For a fixed nonzero kz, the surface only supports surface states in one direction. Hence the surface states are robust against scattering that preserves kz. (a) Simulated Ez field pattern when four PEC rods (shown as black solid circles) near the surface are removed. Electromagnetic (EM) waves with kz=0.3π/d and frequency of 12.6 GHz hit the photonic crystal from the left. (b) Field pattern for the case without defect. (c) Field pattern in the presence of a PEC bar. Since both kinds of defects in a and c are periodic in the z direction and kz is conserved, EM waves can pass through or wrap around the defects without backscattering. (d) Field pattern when EM waves with frequency of 11.5 GHz hit the photonic crystal. Wave with frequency outside the band gap can propagate in the bulk crystal. In a–d, the upper surface of the Weyl photonic crystal is bounded by PEC while the other three surfaces (left, right and bottom) are surrounded by air where EM wave can propagate.CC BY · PubMed Central
Figure 8 Experimental set-up for surface transmission measurements. Two sectoral horns with sample tilted angles of 35° or 50° are used to emit and receive microwave. The sample has 11, 13 and 60 periods in the x, y and z directions.
Figure 8 Experimental set-up for surface transmission measurements. Two sectoral horns with sample tilted angles of 35° or 50° are used to emit and receive microwave. The sample has 11, 13 and 60 periods in the x, y and z directions.CC BY · PubMed Central
Figure 9 Measured surface transmissions when different kinds of defects are introduced near the surface. (a,b) Photograph of the samples with defects. (c,d) Measured transmission spectra for two kinds of defects when the incident angle θ=35° (kz=0.2581π/d for 12.5 GHz). (e), (f) Results for θ=50° (kz=0.3447π/d for 12.5 GHz). Cyan boxes in c–f highlight the frequency region of kz-preserved one-way surface states where no obvious backscattering is introduced by the two kinds of defects. Note that the frequency region of robust transport for θ=50° is wider than that for θ=35°. This is consistent with the fact that the nontrivial band gap in the reduced 2D Brillouin zone is wider for a larger kz.
Figure 9 Measured surface transmissions when different kinds of defects are introduced near the surface. (a,b) Photograph of the samples with defects. (c,d) Measured transmission spectra for two kinds of defects when the incident angle θ=35° (kz=0.2581π/d for 12.5 GHz). (e), (f) Results for θ=50° (kz=0.3447π/d for 12.5 GHz). Cyan boxes in c–f highlight the frequency region of kz-preserved one-way surface states where no obvious backscattering is introduced by the two kinds of defects. Note that the frequency region of robust transport for θ=50° is wider than that for θ=35°. This is consistent with the fact that the nontrivial band gap in the reduced 2D Brillouin zone is wider for a larger kz.CC BY · PubMed Central

Verification

Claims the paper makes

9 Valid · 0 Not valid · 2 Not checked · 98 Own results and interpretations

65 more claims · 1 with their cited sources checked

Create a free account to see all 109 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 10
  • It may state two separate claims as one. 30
  • The quote only partly states this claim. 3

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 60 references

Cited by

Items 101–200 of 259

Metadata

Authors
Chen, W.-J., Xiao, M., & Chan, C. T.
Affiliations
Hong Kong University of Science and Technology (HK)
Corresponding author
Chan, C. T.
Venue
Nature Communications
Published
2016-10-05
Volume
7
Issue
1
Pages
13038-13038
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2552892788
Cited by
258
References
59
Citations by year
2026: 11 · 2025: 14 · 2024: 16 · 2023: 21 · 2022: 32 · 2021: 28 · 2020: 39 · 2019: 32 · 2018: 32 · 2017: 29 · 2016: 4
FWCI
15.28
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Rare & Special e-Zone (The Hong Kong University of Science and Technology) (submittedVersion)
Funders
Research Grants Council, University Grants Committee (AoE-P-02-12)
Topics
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Topological Materials and Phenomena
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photonic Crystals and Applications
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Quantum Mechanics and Non-Hermitian Physics
Keywords
Weyl points, photonic crystals, Berry curvature, topological charge, surface states, topological photonics

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.