CoChat

Magnetization switching in ferromagnets by adsorbed chiral molecules without current or external magnetic field

Open access

The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.

Abstract

Ferromagnets are commonly magnetized by either external magnetic fields or spin polarized currents. The manipulation of magnetization by spin-current occurs through the spin-transfer-torque effect, which is applied, for example, in modern magnetoresistive random access memory. However, the current density required for the spin-transfer torque is of the order of 1 × 10 6 A·cm −2 , or about 1 × 10 25 electrons s −1 cm −2 . This relatively high current density significantly affects the devices’ structure and performance. Here we demonstrate magnetization switching of ferromagnetic thin layers that is induced solely by adsorption of chiral molecules. In this case, about 10 13 electrons per cm 2 are sufficient to induce magnetization reversal. The direction of the magnetization depends on the handedness of the adsorbed chiral molecules. Local magnetization switching is achieved by adsorbing a chiral self-assembled molecular monolayer on a gold-coated ferromagnetic layer with perpendicular magnetic anisotropy. These results present a simple low-power magnetization mechanism when operating at ambient conditions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/ncomms14567

Cites

28 of 28 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Selective adsorption. (a) Poly(methyl methacrylate) (PMMA) was spin coated on the top of the sample (red) with the top two layers made of Cobalt (grey) and Gold (yellow). (b) Selective areas were patterned using e-beam lithography. (c) The sample was immersed in an ethanolic solution containing the organic molecules (AHPA-L or AHPA-D) (blue). (d) The molecular residue and remaining PMMA were removed by rinsing in ethanol and acetone several times under inert conditions. Selective adsorption areas ranged from 50 × 50 nm2 to 1 × 1 μm2 squares. The molecules were adsorbed at a 40° angle relative to the surface.
Figure 1 Selective adsorption. (a) Poly(methyl methacrylate) (PMMA) was spin coated on the top of the sample (red) with the top two layers made of Cobalt (grey) and Gold (yellow). (b) Selective areas were patterned using e-beam lithography. (c) The sample was immersed in an ethanolic solution containing the organic molecules (AHPA-L or AHPA-D) (blue). (d) The molecular residue and remaining PMMA were removed by rinsing in ethanol and acetone several times under inert conditions. Selective adsorption areas ranged from 50 × 50 nm2 to 1 × 1 μm2 squares. The molecules were adsorbed at a 40° angle relative to the surface.CC BY · PubMed Central
Figure 2 Topography and magnetic phase images. AFM topography images of the SAMs of AHPA-L (a) and AHPA-D (b) adsorbed onto ferromagnetic Co thin layers, including z (nm) and x (μm) scale bars, coated with a 5nm gold over-layer and their corresponding magnetic force microscopy molecular-induced magnetic phase images and colour bars of AHPA-L (c) and AHPA-D (d) magnetization orientation, displaying the same area as seen in the topography images (scale bar is set to 1 μm).
Figure 2 Topography and magnetic phase images. AFM topography images of the SAMs of AHPA-L (a) and AHPA-D (b) adsorbed onto ferromagnetic Co thin layers, including z (nm) and x (μm) scale bars, coated with a 5nm gold over-layer and their corresponding magnetic force microscopy molecular-induced magnetic phase images and colour bars of AHPA-L (c) and AHPA-D (d) magnetization orientation, displaying the same area as seen in the topography images (scale bar is set to 1 μm).CC BY · PubMed Central
Figure 3 Device topography and molecular-induced magnetization. (a) Magnetic force microscopy magnetic phase image of a molecular-induced magnetization direction by AHPA-L chiral molecules in a matrix of 250 × 250 nm2 selective adsorption areas (scale bar is set to 300 nm). The inset shows magnetic domain sizes before adsorbing the molecules (left) with a cross section view (right) along the dashed line. (b) Atomic force microscopy topography image of 1 × 1 μm2, 500 × 500, 250 × 250, 100 × 100 and 50 × 50 nm2 (the latter is shown in the inset) chiral self-assembled monolayer selective adsorption areas (scale bar is set to 500 nm).
Figure 3 Device topography and molecular-induced magnetization. (a) Magnetic force microscopy magnetic phase image of a molecular-induced magnetization direction by AHPA-L chiral molecules in a matrix of 250 × 250 nm2 selective adsorption areas (scale bar is set to 300 nm). The inset shows magnetic domain sizes before adsorbing the molecules (left) with a cross section view (right) along the dashed line. (b) Atomic force microscopy topography image of 1 × 1 μm2, 500 × 500, 250 × 250, 100 × 100 and 50 × 50 nm2 (the latter is shown in the inset) chiral self-assembled monolayer selective adsorption areas (scale bar is set to 500 nm).CC BY · PubMed Central
Figure 4 Anomalous Hall effect device configuration scheme and results. Current Ix=1 mA is driven along the x-axis, voltage, Vy, is measured along the y-axis at room temperature. (a,b) AHPA-L (AHPA-D) chiral molecules adsorbed onto the conducting channel induce upwards (downwards) magnetization H as denoted by a blue (red) arrow, respectively. (c) The difference between Rxy for a bare sample and Rxy after AHPA-L (blue) and AHPA-D (red) adsorption. The unchanged Hall resistance seen during the time of measurement is the manifestation of a constant induced magnetic field caused by the molecular adsorption. Different devices display different asymmetries although all have a consistent ΔRxy opposite sign for both molecule types. (c, inset) Superconducting quantum interference device with vibrating sample magnetometer M(H) data for the AHPA-L adsorbed and bare configurations of the thin multilayer sample. The AHPA-L adsorption shifted the magnetization loop by 10–15 Oe, which is around 50% of the full magnetization value of the thin multilayer sample (not the anomalous Hall effect sample).
Figure 4 Anomalous Hall effect device configuration scheme and results. Current Ix=1 mA is driven along the x-axis, voltage, Vy, is measured along the y-axis at room temperature. (a,b) AHPA-L (AHPA-D) chiral molecules adsorbed onto the conducting channel induce upwards (downwards) magnetization H as denoted by a blue (red) arrow, respectively. (c) The difference between Rxy for a bare sample and Rxy after AHPA-L (blue) and AHPA-D (red) adsorption. The unchanged Hall resistance seen during the time of measurement is the manifestation of a constant induced magnetic field caused by the molecular adsorption. Different devices display different asymmetries although all have a consistent ΔRxy opposite sign for both molecule types. (c, inset) Superconducting quantum interference device with vibrating sample magnetometer M(H) data for the AHPA-L adsorbed and bare configurations of the thin multilayer sample. The AHPA-L adsorption shifted the magnetization loop by 10–15 Oe, which is around 50% of the full magnetization value of the thin multilayer sample (not the anomalous Hall effect sample).CC BY · PubMed Central
Figure 5 Experimental concept. In the semi-classical approach the adsorption induces transfer of electrons with a specific spin from the FM layer to the SAM (denoted by the green arrow). Owing to the SAM dipoles, the LUMO is partially below the Fermi level (dashed line). Electrons are transferred to the SAM to fill the now empty states below the Fermi energy. The transferred electrons have a specific spin because of the chirality of the AHPA-D (a) or AHPA-L (b) molecules. Consequently, splitting in the spin states' density in the FM is created, hence directional magnetization. (c) In the suggested quantum mechanical approach the electronic wave function (green) delocalization induces imbalances in spin-up (blue) and spin-down (red) populations, indicated as anisotropic magnetization H pointing upwards or downwards, respectively.
Figure 5 Experimental concept. In the semi-classical approach the adsorption induces transfer of electrons with a specific spin from the FM layer to the SAM (denoted by the green arrow). Owing to the SAM dipoles, the LUMO is partially below the Fermi level (dashed line). Electrons are transferred to the SAM to fill the now empty states below the Fermi energy. The transferred electrons have a specific spin because of the chirality of the AHPA-D (a) or AHPA-L (b) molecules. Consequently, splitting in the spin states' density in the FM is created, hence directional magnetization. (c) In the suggested quantum mechanical approach the electronic wave function (green) delocalization induces imbalances in spin-up (blue) and spin-down (red) populations, indicated as anisotropic magnetization H pointing upwards or downwards, respectively.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 28 references

Cited by

See all 218

Metadata

Authors
Ben Dor, O., Yochelis, S., Radko, A., Vankayala, K., Capua, E., Capua, A., Yang, S.-H., Baczewski, L. T., Parkin, S. S. P., Naaman, R., & Paltiel, Y.
Affiliations
  • Hebrew University of Jerusalem (IL)
  • Weizmann Institute of Science (IL)
  • IBM Research - Almaden (US)
  • Institute of Physics (PL)
Corresponding author
Paltiel, Yossi
Venue
Nature Communications
Published
2017-02-23
Volume
8
Issue
1
Pages
14567-14567
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2589599241
Cited by
218
References
28
Citations by year
2026: 20 · 2025: 37 · 2024: 23 · 2023: 30 · 2022: 28 · 2021: 23 · 2020: 26 · 2019: 18 · 2018: 11 · 2017: 2
FWCI
7.65
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • European Commission (2007–2013, FP7 2007-2013, FP7/2007)
  • Volkswagen Foundation (88 367, VW 88 367)
  • Ministry of Science, Technology and Space (0399174)
  • Israel Science Foundation (1248/10, FP7/2007-2013)
  • FP7 Ideas: European Research Council (338720)
Topics
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Magnetic properties of thin films
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetism in coordination complexes
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surface Chemistry and Catalysis
Keywords
magnetization reversal, chiral molecules, adsorbed molecules, ferromagnetic thin films, perpendicular magnetic anisotropy, molecular chirality, self-assembled monolayers, magnetoresistive random access memory

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Magnetization switching in ferromagnets by adsorbed chiral molecules without current or external magnetic field. https://app.cochat.ai/papers/10.1038/ncomms14567
The paper
Ben Dor, O., Yochelis, S., Radko, A., Vankayala, K., Capua, E., Capua, A., Yang, S.-H., Baczewski, L. T., Parkin, S. S. P., Naaman, R., & Paltiel, Y. (2017). Magnetization switching in ferromagnets by adsorbed chiral molecules without current or external magnetic field. Nature Communications. https://doi.org/10.1038/ncomms14567

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.