The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Polymorphism in a high-entropy alloy
Open accessAbstract
Polymorphism, which describes the occurrence of different lattice structures in a crystalline material, is a critical phenomenon in materials science and condensed matter physics. Recently, configuration disorder was compositionally engineered into single lattices, leading to the discovery of high-entropy alloys and high-entropy oxides. For these novel entropy-stabilized forms of crystalline matter with extremely high structural stability, is polymorphism still possible? Here by employing in situ high-pressure synchrotron radiation X-ray diffraction, we reveal a polymorphic transition from face-centred-cubic (fcc) structure to hexagonal-close-packing (hcp) structure in the prototype CoCrFeMnNi high-entropy alloy. The transition is irreversible, and our in situ high-temperature synchrotron radiation X-ray diffraction experiments at different pressures of the retained hcp high-entropy alloy reveal that the fcc phase is a stable polymorph at high temperatures, while the hcp structure is more thermodynamically favourable at lower temperatures. As pressure is increased, the critical temperature for the hcp-to-fcc transformation also rises.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
EXPGUI, a graphical user interface for GSAS
Toby, B. H. (2001) · Journal of Applied Crystallography · doi:10.1107/s0021889801002242 · Cited by 9,247
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationFrom Molecules to Crystal Engineering: Supramolecular Isomerism and Polymorphism in Network Solids
Moulton, B., & Zaworotko, M. J. (2001) · Chemical Reviews · doi:10.1021/cr9900432 · Cited by 6,395
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Elasticity and constitution of the Earth's interior
Birch, F. (1952) · Journal of Geophysical Research · doi:10.1029/jz057i002p00227 · Cited by 2,540
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
DIOPTAS: a program for reduction of two-dimensional X-ray diffraction data and data exploration
Prescher, C., & Prakapenka, V. B. (2015) · High Pressure Research · doi:10.1080/08957959.2015.1059835 · Cited by 1,981
Self-citationControl of Aragonite or Calcite Polymorphism by Mollusk Shell Macromolecules
Falini, G., Albeck, S., Weiner, S., & Addadi, L. (1996) · Science · doi:10.1126/science.271.5245.67 · Cited by 1,437
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Tensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Otto, F., Dlouhý, A., Pradeep, K. G., Kuběnová, M., Raabe, D., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.005 · Cited by 932
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Self-citationMechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. (2013) · JOM · doi:10.1007/s11837-013-0771-4 · Cited by 878
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Multicomponent and High Entropy Alloys
Cantor, B. (2014) · Entropy · doi:10.3390/e16094749 · Cited by 656
Ultrastrong ductile and stable high-entropy alloys at small scales
Zou, Y., Ma, H., & Spolenak, R. (2015) · Nature Communications · doi:10.1038/ncomms8748 · Cited by 634
Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy
Huang, S., Li, W., Lu, S., Tian, F., Shen, J., Holmström, E., & Vitos, L. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.05.041 · Cited by 583
Ma, D., Grabowski, B., Körmann, F., Neugebauer, J., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.050 · Cited by 556
Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi
Pickering, E. J., Muñoz-Moreno, R., Stone, H. J., & Jones, N. G. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.10.025 · Cited by 555
Discovery of a Superconducting High-Entropy Alloy
Koželj, P., Vrtnik, S., Jelen, A., Jazbec, S., Jagličić, Z., Maiti, S., Feuerbacher, M., Steurer, W., & Dolinšek, J. (2014) · Physical Review Letters · doi:10.1103/physrevlett.113.107001 · Cited by 552
Entropy difference between the face-centred cubic and hexagonal close-packed crystal structures
Woodcock, L. V. (1997) · Nature · doi:10.1038/385141a0 · Cited by 456
Polymorphic Phase Transitions in Liquids and Glasses
Poole, P. H., Grande, T., Angell, C. A., & McMillan, P. F. (1997) · Science · doi:10.1126/science.275.5298.322 · Cited by 438
Polyamorphism in a metallic glass
Sheng, H. W., Liu, H. Z., Cheng, Y. Q., Wen, J., Lee, P. L., Luo, W. K., Shastri, S. D., & Ma, E. (2007) · Nature Materials · doi:10.1038/nmat1839 · Cited by 416
Insights into the phase diagram of the CrMnFeCoNi high entropy alloy
Laurent-Brocq, M., Akhatova, A., Perrière, L., Chebini, S., Sauvage, X., Leroy, E., & Champion, Y. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.01.068 · Cited by 361
Prakapenka, V. B., Kubo, A., Kuznetsov, A., Laskin, A., Shkurikhin, O., Dera, P., Rivers, M. L., & Sutton, S. R. (2008) · High Pressure Research · doi:10.1080/08957950802050718 · Cited by 333
Self-citationMultiphase transformation and Ostwald’s rule of stages during crystallization of a metal phosphate
Chung, S.-Y., Kim, Y.-M., Kim, J.-G., & Kim, Y.-J. (2009) · Nature Physics · doi:10.1038/nphys1148 · Cited by 313
Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures
Haglund, A., Koehler, M., Catoor, D., George, E. P., & Keppens, V. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.11.005 · Cited by 196
Evidence of a fcc-hcp Transition in Aluminum at Multimegabar Pressure
Akahama, Y., Nishimura, M., Kinoshita, K., Kawamura, H., & Ohishi, Y. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.045505 · Cited by 180
Structural Phase Transition of Vanadium at 69 GPa
Ding, Y., Ahuja, R., Shu, J., Chow, P. C., Luo, W., & Mao, H. (2007) · Physical Review Letters · doi:10.1103/physrevlett.98.085502 · Cited by 153
Martensitic fcc-to-hcp Transformation Observed in Xenon at High Pressure
Cynn, H., Yoo, C., Baer, B. J., Iota, V., McMahan, A. K., Nicol, M., & Carlson, S. (2001) · Physical Review Letters · doi:10.1103/physrevlett.86.4552 · Cited by 151
Preparation of superfine-grained high entropy alloy by spark plasma sintering gas atomized powder
Liu, Y., Wang, J., Fang, Q., Liu, B., Wu, Y., & Chen, S. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.08.012 · Cited by 133
Self-citationStructural relationship between pyrite and marcasite
Dódony, I., Pósfai, M., & Buseck, P. R. (1996) · American Mineralogist · doi:10.2138/am-1996-1-215 · Cited by 67
Ponyatovsky, E. G., & Tonkov, E. Y. (2004) · Advances in nonlinear optics/Advances in metallic alloys · doi:10.1201/9781420037609.ch1 · Cited by 52
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
High-entropy materials for catalysis: A new frontier
Sun, Y., & Dai, S. (2021) · Science Advances · doi:10.1126/sciadv.abg1600 · Cited by 942
Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
Ding, J., Yu, Q., Asta, M., & Ritchie, R. O. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1808660115 · Cited by 845
High-entropy alloys in electrocatalysis: from fundamentals to applications
Ren, J.-T., Chen, L., Wang, H.-Y., & Yuan, Z.-Y. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00557g · Cited by 551
Metadata
- Authors
- Zhang, F., Wu, Y., Lou, H., Zeng, Z., Prakapenka, V. B., Greenberg, E., Ren, Y., Yan, J., Okasinski, J. S., Liu, X., Liu, Y., Zeng, Q., & Lu, Z.
- Venue
- Nature Communications
- Published
- 2017-06-01
- Volume
- 8
- Issue
- 1
- Pages
- 15687-15687
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2621355768
- Cited by
- 329
- References
- 38
- FWCI
- 28.90
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.