Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 463

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Correspondence: Reply to ‘The experimental requirements for a photon thermal diode’

Open access
Chen, Zhen, Wong, Carlaton, Lubner, Sean, Yee, Shannon, Miller, John, Jang, Wanyoung, Hardin, Corey, Fong, Anthony, Garay, Javier E., Dames, Chris · 2017 · Nature Communications

Abstract

Budaev 1 correctly identifies a fundamental symmetry error in several crucial experiments in our recent study 2 , specifically the results presented in Fig. 3c (the three filled and four striped bars, labeled ‘Col. 1’ and ‘Col. 2’, respectively) and Fig. 4. A suitable configuration for those measurements should have included identical (mirror-imaged) collimators at both hot and cold sides, as in Fig. 1a here. However, the actual experiments omitted the cold-side collimator, a choice made for experimental simplicity and which we believed was acceptable at the time based on a simple thermal model 3 and the fact that T BBC 4 ≫ T ∞ 4 , where T BBC and T ∞ are the temperatures of the blackbody (BB) cavity and cold-side plate, respectively. However, upon careful reconsideration we now find that thermal model to be flawed, and we believe that omitting the cold-side collimator invalidated several key measurements. We provide a more detailed discussion of that thermal estimate, and the reasons for its failure, elsewhere 3 . Figure 1: Alternative analyses reveal a fundamental problem with the thermalizing graphite plate concept for inelastic thermal collimation. The alternative text for this image may have been generated using AI. Full size image ( a ) Schematic of a configuration with proper symmetries 1 , using two mirror-imaged thermal collimators. The heat transfer response function Q ( T 1 , T 2 ) can be analyzed using either of the control volumes depicted in b , c . ( b ) In the original work (for example, Supplementary Fig. 5c of ref. 2 ), each graphite plate was considered part of its adjacent BB, corresponding to non-equilibrium reservoir boundary conditions f NE,1 ( T 1 , T 2 ) and f NE,2 ( T 2 , T 1 ). ( c ) Alternatively, the graphite plates can be considered with the pyramids as Σ B . In this case, the reservoir boundary conditions are perfect blackbodies with equilibrium Bose-Einstein statistics f BE ( T 1 ) and f BE ( T 2 ), analyzed further here in Fig. 2 . Clearly the Q ( T 1 , T 2 ) function must be the same whether calculated using b or c .

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/ncomms16136

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Cited by

Metadata

Authors
Chen, Z., Wong, C., Lubner, S., Yee, S., Miller, J., Jang, W., Hardin, C., Fong, A., Garay, J. E., & Dames, C.
Venue
Nature Communications
Published
2017-08-21
Volume
8
Issue
1
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2748264243
Cited by
463
References
1
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.