The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Membrane-less hydrogen bromine flow battery
Open accessAbstract
In order for the widely discussed benefits of flow batteries for electrochemical energy storage to be applied at large scale, the cost of the electrochemical stack must come down substantially. One promising avenue for reducing stack cost is to increase the system power density while maintaining efficiency, enabling smaller stacks. Here we report on a membrane-less hydrogen bromine laminar flow battery as a potential high-power density solution. The membrane-less design enables power densities of 0.795 W cm−2 at room temperature and atmospheric pressure, with a round-trip voltage efficiency of 92% at 25% of peak power. Theoretical solutions are also presented to guide the design of future laminar flow batteries. The high-power density achieved by the hydrogen bromine laminar flow battery, along with the potential for rechargeable operation, will translate into smaller, inexpensive systems that could revolutionize the fields of large-scale energy storage and portable power systems. Membrane-less electrochemical systems eliminate the need for costly ion-exchange membranes, but typically suffer from low-power densities. Braff et al.propose a hydrogen bromine laminar flow battery, which rivals the performance of the best membrane-based systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chaotic Mixer for Microchannels
Stroock, A. D., Dertinger, S. K. W., Ajdari, A., Mezić, I., Stone, H. A., & Whitesides, G. M. (2002) · Science · doi:10.1126/science.1066238 · Cited by 3,435 · cited 1×
“the cell. Incorporating further renements, such as micro patterned chaotic mixing patterns coupled with a non-specic convection barrier or non noble metal catalysts could also improve performance. [40, 30, 41]. The initial data presented here for the HBLFB suggests that high power density and high eciency energy stora…”
BackgroundKreuer, K.-D., Paddison, S. J., Spohr, E., & Schuster, M. (2004) · Chemical Reviews · doi:10.1021/cr020715f · Cited by 2,187
Cited by
Rechargeable Batteries for Grid Scale Energy Storage
Zhu, Z., Jiang, T., Ali, M., Meng, Y., Jin, Y., Cui, Y., & Chen, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00289 · Cited by 1,769
Flow Batteries: Current Status and Trends
Soloveichik, G. L. (2015) · Chemical Reviews · doi:10.1021/cr500720t · Cited by 1,261
Redox‐Flow Batteries: From Metals to Organic Redox‐Active Materials
Winsberg, J., Hagemann, T., Janoschka, T., Hager, M. D., & Schubert, U. S. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201604925 · Cited by 1,010
Material design and engineering of next-generation flow-battery technologies
Park, M., Ryu, J., Wang, W., & Cho, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.80 · Cited by 841
The Chemistry of Redox‐Flow Batteries
Noack, J., Roznyatovskaya, N., Herr, T., & Fischer, P. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410823 · Cited by 734
Metadata
- Authors
- Braff, W. A., Bazant, M. Z., & Buie, C. R.
- Venue
- Nature Communications
- Published
- 2013-08-16
- Volume
- 4
- Issue
- 1
- Pages
- 2346-2346
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2126910559
- Cited by
- 219
- References
- 2
- FWCI
- 11.18
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.