The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Extremely durable biofouling-resistant metallic surfaces based on electrodeposited nanoporous tungstite films on steel
Open accessAbstract
Formation of unwanted deposits on steels during their interaction with liquids is an inherent problem that often leads to corrosion, biofouling and results in reduction in durability and function. Here we report a new route to form anti-fouling steel surfaces by electrodeposition of nanoporous tungsten oxide (TO) films. TO-modified steels are as mechanically durable as bare steel and highly tolerant to compressive and tensile stresses due to chemical bonding to the substrate and island-like morphology. When inherently superhydrophilic TO coatings are converted to superhydrophobic, they remain non-wetting even after impingement with yttria-stabilized-zirconia particles, or exposure to ultraviolet light and extreme temperatures. Upon lubrication, these surfaces display omniphobicity against highly contaminating media retaining hitherto unseen mechanical durability. To illustrate the applicability of such a durable coating in biofouling conditions, we modified naval construction steels and surgical instruments and demonstrated significantly reduced marine algal film adhesion, Escherichia coli attachment and blood staining.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Super‐Hydrophobic Surfaces: From Natural to Artificial
Feng, L., Li, S., Li, Y., Li, H., Zhang, L., Zhai, J., Song, Y., Liu, B., Jiang, L., & Zhu, D. (2002) · Advanced Materials · doi:10.1002/adma.200290020 · Cited by 4,404
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A., & Aizenberg, J. (2011) · Nature · doi:10.1038/nature10447 · Cited by 4,134
Self-citationLafuma, A., & Quéré, D. (2003) · Nature Materials · doi:10.1038/nmat924 · Cited by 3,315
Banerjee, I., Pangule, R. C., & Kane, R. S. (2011) · Advanced Materials · doi:10.1002/adma.201001215 · Cited by 2,749
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Handbook of Inorganic Electrochromic Materials
Granqvist, C. G. (1995) · Elsevier eBooks · doi:10.1016/b978-0-444-89930-9.x5000-4 · Cited by 2,314
Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating
Deng, X., Mammen, L., Butt, H.-J., & Vollmer, D. (2012) · Science · doi:10.1126/science.1207115 · Cited by 2,053
Robust self-cleaning surfaces that function when exposed to either air or oil
Lu, Y., Sathasivam, S., Song, J., Crick, C. R., Carmalt, C. J., & Parkin, I. P. (2015) · Science · doi:10.1126/science.aaa0946 · Cited by 1,808
Electrochromic tungsten oxide films: Review of progress 1993–1998
Granqvist, C. G. (2000) · Solar Energy Materials and Solar Cells · doi:10.1016/s0927-0248(99)00088-4 · Cited by 1,445
Guideline for disinfection and sterilization in healthcare facilities, 2008
Rutala, W. A., & Weber, D. J. (2008) · Infection Control and Hospital Epidemiology · Cited by 1,405
Cited by
Design of anti-icing surfaces: smooth, textured or slippery?
Kreder, M. J., Alvarenga, J., Kim, P., & Aizenberg, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.3 · Cited by 1,505
Self-citationPreventing mussel adhesion using lubricant-infused materials
Amini, S., Kolle, S., Petrone, L., Ahanotu, O., Sunny, S., Sutanto, C. N., Hoon, S., Cohen, L., Weaver, J. C., Aizenberg, J., et al. (2017) · Science · doi:10.1126/science.aai8977 · Cited by 534
Self-citationRobust and durable liquid-repellent surfaces
Chen, F., Wang, Y., Tian, Y., Zhang, D., Song, J., Crick, C. R., Carmalt, C. J., Parkin, I. P., & Lu, Y. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01033b · Cited by 378
Designing Liquid‐Infused Surfaces for Medical Applications: A Review
Howell, C., Grinthal, A., Sunny, S., Aizenberg, M., & Aizenberg, J. (2018) · Advanced Materials · doi:10.1002/adma.201802724 · Cited by 318
Self-citationFluoropolymers in Biomedical Applications: State-of-the-Art and Future Perspectives
Lv, J., & Cheng, Y. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00258e · Cited by 316
Long, Y., Yin, X., Mu, P., Wang, Q., Hu, J., & Li, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126137 · Cited by 307
Smart Gating Multi‐Scale Pore/Channel‐Based Membranes
Hou, X. (2016) · Advanced Materials · doi:10.1002/adma.201600797 · Cited by 274
Zhang, J., Gu, C., & Tu, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00972 · Cited by 274
Designing Bioinspired Anti‐Biofouling Surfaces based on a Superwettability Strategy
Zhang, P., Lin, L., Zang, D., Guo, X., & Liu, M. (2017) · Small · doi:10.1002/smll.201503334 · Cited by 266
Slippery Lubricant‐Infused Surfaces: Properties and Emerging Applications
Li, J., Ueda, E., Paulssen, D., & Levkin, P. A. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201802317 · Cited by 264
Superhydrophobic coatings for corrosion protection of magnesium alloys
Yao, W., Liang, W., Huang, G., Jiang, B., Atrens, A., & Pan, F. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.02.055 · Cited by 257
Recent progress in the anti-icing performance of slippery liquid-infused surfaces
Heydarian, S., Jafari, R., & Momen, G. (2021) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.106096 · Cited by 117
Taliantzis, K., & Ellinas, K. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103566 · Cited by 83
Metadata
- Authors
- Tesler, A. B., Kim, P., Kolle, S., Howell, C., Ahanotu, O., & Aizenberg, J.
- Venue
- Nature Communications
- Published
- 2015-10-20
- Volume
- 6
- Issue
- 1
- Pages
- 8649-8649
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W1790686233
- Cited by
- 418
- References
- 41
- FWCI
- 14.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.