The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Warming up human body by nanoporous metallized polyethylene textile
Open accessAbstract
Space heating accounts for the largest energy end-use of buildings that imposes significant burden on the society. The energy wasted for heating the empty space of the entire building can be saved by passively heating the immediate environment around the human body. Here, we demonstrate a nanophotonic structure textile with tailored infrared (IR) property for passive personal heating using nanoporous metallized polyethylene. By constructing an IR-reflective layer on an IR-transparent layer with embedded nanopores, the nanoporous metallized polyethylene textile achieves a minimal IR emissivity (10.1%) on the outer surface that effectively suppresses heat radiation loss without sacrificing wearing comfort. This enables 7.1 °C decrease of the set-point compared to normal textile, greatly outperforming other radiative heating textiles by more than 3 °C. This large set-point expansion can save more than 35% of building heating energy in a cost-effective way, and ultimately contribute to the relief of global energy and climate issues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Ecological responses to recent climate change.
Walther, G.-R., Post, E., Convey, P., Menzel, A., Parmesan, C., Beebee, T. J. C., Fromentin, J.-M., Hoegh-Guldberg, O., & Bairlein, F. (2002) · Nature · doi:10.1038/416389a · Cited by 9,975
A review on buildings energy consumption information
Pérez-Lombard, L., Ortiz, J., & Pout, C. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2007.03.007 · Cited by 6,649
The Scientific Consensus on Climate Change
Oreskes, N. (2004) · Science · doi:10.1126/science.1103618 · Cited by 1,814
Jiang, J., Zhu, L., Zhu, L., Zhang, H., Zhu, B., & Xu, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403405c · Cited by 408
Cited by
Advanced Textiles for Personal Thermal Management and Energy
Peng, Y., & Cui, Y. (2020) · Joule · doi:10.1016/j.joule.2020.02.011 · Cited by 747
Self-citationPorous Polymers as Multifunctional Material Platforms toward Task‐Specific Applications
Wu, J., Xu, F., Li, S., Ma, P., Zhang, X., Liu, Q., Fu, R., & Wu, D. (2019) · Advanced Materials · doi:10.1002/adma.201802922 · Cited by 555
Nanophotonic engineering of far-field thermal emitters
Baranov, D. G., Xiao, Y., Nechepurenko, I. A., Krasnok, A., Alù, A., & Kats, M. A. (2019) · Nature Materials · doi:10.1038/s41563-019-0363-y · Cited by 459
Smart textiles for personalized thermoregulation
Fang, Y., Chen, G., Bick, M., & Chen, J. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00003a · Cited by 423
Self-citationManipulating metals for adaptive thermal camouflage
Li, M., Liu, D., Cheng, H., Peng, L., & Zu, M. (2020) · Science Advances · doi:10.1126/sciadv.aba3494 · Cited by 319
Metadata
- Authors
- Cai, L., Song, A. Y., Wu, P., Hsu, P.-C., Peng, Y., Chen, J., Liu, C., Catrysse, P. B., Liu, Y., Yang, A., Zhou, C., Zhou, C., Fan, S., & Cui, Y.
- Venue
- Nature Communications
- Published
- 2017-09-19
- Volume
- 8
- Issue
- 1
- Pages
- 496-496
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2753807109
- Cited by
- 421
- References
- 5
- FWCI
- 24.54
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Warming up human body by nanoporous metallized polyethylene textile. https://app.cochat.ai/papers/10.1038/s41467-017-00614-4
- The paper
- Cai, L., Song, A. Y., Wu, P., Hsu, P.-C., Peng, Y., Chen, J., Liu, C., Catrysse, P. B., Liu, Y., Yang, A., Zhou, C., Zhou, C., Fan, S., & Cui, Y. (2017). Warming up human body by nanoporous metallized polyethylene textile. Nature Communications. https://doi.org/10.1038/s41467-017-00614-4
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
