Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.

Quantum Hall states observed in thin films of Dirac semimetal Cd3As2

Open access
Uchida, Masaki, Nakazawa, Yusuke, Nishihaya, Shinichi, Akiba, Kazuto, Kriener, Markus, Kozuka, Yusuke, Miyake, Atsushi, Taguchi, Yasujiro, Tokunaga, Masashi, Nagaosa, Naoto, Tokura, Yoshinori, Kawasaki, Masashi · 2017 · Nature Communications

Abstract

A well known semiconductor Cd 3 As 2 has reentered the spotlight due to its unique electronic structure and quantum transport phenomena as a topological Dirac semimetal. For elucidating and controlling its topological quantum state, high-quality Cd 3 As 2 thin films have been highly desired. Here we report the development of an elaborate growth technique of high-crystallinity and high-mobility Cd 3 As 2 films with controlled thicknesses and the observation of quantum Hall effect dependent on the film thickness. With decreasing the film thickness to 10 nm, the quantum Hall states exhibit variations such as a change in the spin degeneracy reflecting the Dirac dispersion with a large Fermi velocity. Details of the electronic structure including subband splitting and gap opening are identified from the quantum transport depending on the confinement thickness, suggesting the presence of a two-dimensional topological insulating phase. The demonstration of quantum Hall states in our high-quality Cd 3 As 2 films paves a road to study quantum transport and device application in topological Dirac semimetal and its derivative phases.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-017-02423-1

Cites

43 of 43 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 High-crystallinity and high-mobility Cd3As2 thin films. a Experimental trend of electron mobility versus sheet carrier density. Among our films (filled circle) prepared with pulsed laser deposition (PLD), high-quality ones obtained by high-temperature annealing are highlighted with bigger symbols. The mobility reaches a maximum of μ = 3 × 104 cm2/Vs even at a thickness of t = 30 nm, rivaling mobility values for bulk thinned plates (diamond22) and nanostructures (triangle23 and inverted triangle24), while it intrinsically decreases with reducing to two dimensions. Other films (circle) grown by molecular beam epitaxy (MBE)18,19, thermal evaporation (TE)15, or pulsed laser evaporation (PLE)16 techniques are also plotted for comparison. Inset shows the primary cubic structure of Cd3As2. b–d Schematic illustration of the electronic structure evolution from the 3D DSM state. With decreasing the film thickness, subbands are formed due to the quantum confinement, giving rise to two-dimensional topological insulating (2D TI) and trivial insulating (2D I) states depending on the number of inverted subbands6. e Cross-sectional image of a 14 nm Cd3As2 film sandwiched between Si3N4/TiO2 cap and SrTiO3 substrate. The length of the scale bar is 10 nm. f Atomically resolved element map of the boxed region in e, shown with the cross-sectional view of the crystal structure. g In the x-ray diffraction θ–2θ scan, Bragg peaks of the (112)-oriented Cd3As2 film are observed with clear Laue oscillations. The SrTiO3 substrate peaks are marked with an asterisk
Fig. 1 High-crystallinity and high-mobility Cd3As2 thin films. a Experimental trend of electron mobility versus sheet carrier density. Among our films (filled circle) prepared with pulsed laser deposition (PLD), high-quality ones obtained by high-temperature annealing are highlighted with bigger symbols. The mobility reaches a maximum of μ = 3 × 104 cm2/Vs even at a thickness of t = 30 nm, rivaling mobility values for bulk thinned plates (diamond22) and nanostructures (triangle23 and inverted triangle24), while it intrinsically decreases with reducing to two dimensions. Other films (circle) grown by molecular beam epitaxy (MBE)18,19, thermal evaporation (TE)15, or pulsed laser evaporation (PLE)16 techniques are also plotted for comparison. Inset shows the primary cubic structure of Cd3As2. b–d Schematic illustration of the electronic structure evolution from the 3D DSM state. With decreasing the film thickness, subbands are formed due to the quantum confinement, giving rise to two-dimensional topological insulating (2D TI) and trivial insulating (2D I) states depending on the number of inverted subbands6. e Cross-sectional image of a 14 nm Cd3As2 film sandwiched between Si3N4/TiO2 cap and SrTiO3 substrate. The length of the scale bar is 10 nm. f Atomically resolved element map of the boxed region in e, shown with the cross-sectional view of the crystal structure. g In the x-ray diffraction θ–2θ scan, Bragg peaks of the (112)-oriented Cd3As2 film are observed with clear Laue oscillations. The SrTiO3 substrate peaks are marked with an asteriskCC BY · PubMed Central
Fig. 2 Quantum Hall effect observed in Cd3As2 films. a, b High-field magnetotransport for thin films (t = 12 and 14 nm) measured at T = 1.4 K. The numbers of the horizontal bars represent the filling factor ν. The degeneracy factor s is determined to be s = 2 from the increment of the plateau values. c, d Same scan for slightly thicker films (t = 16 and 23 nm). By contrast, the degeneracy factor is altered to s = 1 in these thicker films at high fields. Inset depicts a measured Hall bar with a channel width of 60 μm. The length of the scale bar is 300 μm
Fig. 2 Quantum Hall effect observed in Cd3As2 films. a, b High-field magnetotransport for thin films (t = 12 and 14 nm) measured at T = 1.4 K. The numbers of the horizontal bars represent the filling factor ν. The degeneracy factor s is determined to be s = 2 from the increment of the plateau values. c, d Same scan for slightly thicker films (t = 16 and 23 nm). By contrast, the degeneracy factor is altered to s = 1 in these thicker films at high fields. Inset depicts a measured Hall bar with a channel width of 60 μm. The length of the scale bar is 300 μmCC BY · PubMed Central
Fig. 3 Thickness-dependent quantum transport characteristics. a Temperature dependence of the SdH oscillations for the 12 nm Cd3As2 film, plotted against 1/B after subtracting a smooth background from R xx. b Dingle analysis of the oscillation amplitude to obtain effective mass and quantum scattering time (inset). c Landau-level fan diagram plotted for the series of films with different thicknesses, and its magnification to evaluate the intercept for the 12 nm film (inset). The integer (half-integer) indices at R xx peak (valley) are denoted by closed (open) circles. In the thicker 16 and 23 nm films, spin splitting of the oscillations occurs above the critical field B c. d Fourier transformation of the SdH oscillations below 12 T to extract the oscillation frequencies B F,1 and B F,2
Fig. 3 Thickness-dependent quantum transport characteristics. a Temperature dependence of the SdH oscillations for the 12 nm Cd3As2 film, plotted against 1/B after subtracting a smooth background from R xx. b Dingle analysis of the oscillation amplitude to obtain effective mass and quantum scattering time (inset). c Landau-level fan diagram plotted for the series of films with different thicknesses, and its magnification to evaluate the intercept for the 12 nm film (inset). The integer (half-integer) indices at R xx peak (valley) are denoted by closed (open) circles. In the thicker 16 and 23 nm films, spin splitting of the oscillations occurs above the critical field B c. d Fourier transformation of the SdH oscillations below 12 T to extract the oscillation frequencies B F,1 and B F,2CC BY · PubMed Central
Fig. 4 Electronic structures identified from quantum transport. a Cross sectional dispersions along the out-of-plane field direction (k ||[112]). b Subband formation (n c = 1 and 2) within the in-plane direction (k ⊥[112]), for t = 23 nm. c, d Constructed electronic structures measured from the Dirac point energy E D, are shown for the two typical thicknesses (t = 12 and 23 nm) (see Supplementary Fig. 13 for all the thicknesses). In c, the obtained Fermi energy E F and in-plane Fermi momentum k F are plotted for the split subbands (square). The bottom of the conduction band (CB) and the top of the valence band (VB) interpolated from previous calculations17 are indicated by an upward and a downward triangle, respectively. The error bars for E F were estimated from Eq. (1) by assigning effective mass values obtained using the Lifshitz-Kosevich formula for each filling state ν (see Fig. 3b). The structural plot in d represents the Bohr–Sommerfeld quantization condition along the film normal direction (Eqs. (2) and (3)), where the crossing point (triangle) of the original calculated band dispersions (dotted lines, left-hand side of Eq. (3))6 and the quantization condition curves (vertical dashed lines, right-hand side of Eq. (3)) determines the energy and momentum of the bottom of the split subbands. The orbital character of each subband is also identified, indicating the topological phase transition as represented by the color change of the subband (n c = 1) from blue (Cd 5s) to pink (As 4p). Subband data of n c = 1 (2) are distinguished by closed (open) symbols and thick (thin) dashed lines
Fig. 4 Electronic structures identified from quantum transport. a Cross sectional dispersions along the out-of-plane field direction (k ||[112]). b Subband formation (n c = 1 and 2) within the in-plane direction (k ⊥[112]), for t = 23 nm. c, d Constructed electronic structures measured from the Dirac point energy E D, are shown for the two typical thicknesses (t = 12 and 23 nm) (see Supplementary Fig. 13 for all the thicknesses). In c, the obtained Fermi energy E F and in-plane Fermi momentum k F are plotted for the split subbands (square). The bottom of the conduction band (CB) and the top of the valence band (VB) interpolated from previous calculations17 are indicated by an upward and a downward triangle, respectively. The error bars for E F were estimated from Eq. (1) by assigning effective mass values obtained using the Lifshitz-Kosevich formula for each filling state ν (see Fig. 3b). The structural plot in d represents the Bohr–Sommerfeld quantization condition along the film normal direction (Eqs. (2) and (3)), where the crossing point (triangle) of the original calculated band dispersions (dotted lines, left-hand side of Eq. (3))6 and the quantization condition curves (vertical dashed lines, right-hand side of Eq. (3)) determines the energy and momentum of the bottom of the split subbands. The orbital character of each subband is also identified, indicating the topological phase transition as represented by the color change of the subband (n c = 1) from blue (Cd 5s) to pink (As 4p). Subband data of n c = 1 (2) are distinguished by closed (open) symbols and thick (thin) dashed linesCC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 43 references

Research works printed but not linked: 1

  1. Zhao, Y. et al. Anisotropic Fermi surface and quantum limit transport in high mobility three-dimensional Dirac semimetal Cd3As2. Phys. Rev. X 5, 031037 (2015).

Cited by

See all 176

Metadata

Authors
Uchida, M., Nakazawa, Y., Nishihaya, S., Akiba, K., Kriener, M., Kozuka, Y., Miyake, A., Taguchi, Y., Tokunaga, M., Nagaosa, N., Tokura, Y., & Kawasaki, M.
Affiliations
  • Quantum-Phase Electronics Center, School of Engineering, The University of Tokyo (JP)
  • The Institute for Solid State Physics, The University of Tokyo (JP)
  • RIKEN Center for Emergent Matter Science (JP)
Corresponding author
Uchida, Masaki
Venue
Nature Communications
Published
2017-12-22
Volume
8
Issue
1
Pages
2274-2274
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2780995946
Cited by
176
References
43
Citations by year
2026: 11 · 2025: 19 · 2024: 23 · 2023: 18 · 2022: 23 · 2021: 32 · 2020: 22 · 2019: 14 · 2018: 14
FWCI
6.71
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • arXiv (Cornell University) (cc-by)
Funders
  • Ministry of Education, Culture, Sports, Science and Technology (JP16H00980, JP15K05140, CREST, JP15H05425)
  • Japan Society for the Promotion of Science (15H05852, 15K05140, 16J04781)
  • Core Research for Evolutional Science and Technology (JPMJCR16F1, No. JPMJCR16F1)
Topics
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Topological Materials and Phenomena
  • Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Quantum and electron transport phenomena
Keywords
Cd3As2, topological Dirac semimetal, quantum Hall effect, thin films, film thickness dependence, spin degeneracy, Fermi velocity, subband splitting, gap opening, quantum spin Hall insulator, quantum transport, epitaxial growth, high mobility

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Quantum Hall states observed in thin films of Dirac semimetal Cd3As2. https://app.cochat.ai/papers/10.1038/s41467-017-02423-1
The paper
Uchida, M., Nakazawa, Y., Nishihaya, S., Akiba, K., Kriener, M., Kozuka, Y., Miyake, A., Taguchi, Y., Tokunaga, M., Nagaosa, N., Tokura, Y., & Kawasaki, M. (2017). Quantum Hall states observed in thin films of Dirac semimetal Cd3As2. Nature Communications. https://doi.org/10.1038/s41467-017-02423-1

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.