CoChat

Lithium niobate photonic-crystal electro-optic modulator

Open access
Li, Mingxiao, Ling, Jingwei, He, Yang, Javid, Usman A., Xue, Shixin, Lin, Qiang · 2020 · Nature Communications

The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.

Abstract

Modern advanced photonic integrated circuits require dense integration of high-speed electro-optic functional elements on a compact chip that consumes only moderate power. Energy efficiency, operation speed, and device dimension are thus crucial metrics underlying almost all current developments of photonic signal processing units. Recently, thin-film lithium niobate (LN) emerges as a promising platform for photonic integrated circuits. Here, we make an important step towards miniaturizing functional components on this platform, reporting high-speed LN electro-optic modulators, based upon photonic crystal nanobeam resonators. The devices exhibit a significant tuning efficiency up to 1.98 GHz V −1 , a broad modulation bandwidth of 17.5 GHz, while with a tiny electro-optic modal volume of only 0.58 μ m 3 . The modulators enable efficient electro-optic driving of high-Q photonic cavity modes in both adiabatic and non-adiabatic regimes, and allow us to achieve electro-optic switching at 11 Gb s −1 with a bit-switching energy as low as 22 fJ. The demonstration of energy efficient and high-speed electro-optic modulation at the wavelength scale paves a crucial foundation for realizing large-scale LN photonic integrated circuits that are of immense importance for broad applications in data communication, microwave photonics, and quantum photonics.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-17950-7

Cites

49 of 49 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Design of LN photonic-crystal EOM. a Schematic of the LN photonic-crystal EOM. b The structure of the unit cell (top: top view; bottom: cross-sectional view). The LN photonic-crystal nanobeam has a width of w = 1200 nm, layer thickness of t = 300 nm, and a partially etched wing layer with a thickness of 150 nm. The elliptical hole has dimensions of hx = 270 nm and hy = 490 nm, and a fully etched depth of 300 nm. a is the lattice constant. The full cross-section is shown in d. c Dispersion property of the partially etched LN photonic-crystal nanobeam, simulated by the finite element method (FEM). The blue open circles show the dielectric and air bands. The red solid and open circles denote the fundamental and second-order TE-like cavity modes shown in f and g. Our simulations show that there exhibits another mode with eigenfrequency within the band gap (gray open circles). This mode, however, has only negligible perturbation to the dielectric mode due to distinctive spatial symmetry, thus not affecting the quality of the defect cavity mode. d Cross-sectional schematic of the EOM structure, where the arrow profile shows the radio frequency (RF) electric field distribution and the color profile shows the optical cavity mode field distribution, both simulated by the FEM method. e Lattice constant a as a function of position, which is optimized for low insertion loss together with high radiation-limited optical Q. f Top view of the FEM-simulated optical mode field profile of the fundamental TE-like cavity mode TE01⁰. The left inset shows the orientation of the LN crystal where the optical axis is along the z direction. g Simulated optical mode field profile of the second-order TE-like cavity mode TE01¹. The scale bar on the left represents the strength of normalized electrical field (Enorm) for d, f, g.
Fig. 1 Design of LN photonic-crystal EOM. a Schematic of the LN photonic-crystal EOM. b The structure of the unit cell (top: top view; bottom: cross-sectional view). The LN photonic-crystal nanobeam has a width of w = 1200 nm, layer thickness of t = 300 nm, and a partially etched wing layer with a thickness of 150 nm. The elliptical hole has dimensions of hx = 270 nm and hy = 490 nm, and a fully etched depth of 300 nm. a is the lattice constant. The full cross-section is shown in d. c Dispersion property of the partially etched LN photonic-crystal nanobeam, simulated by the finite element method (FEM). The blue open circles show the dielectric and air bands. The red solid and open circles denote the fundamental and second-order TE-like cavity modes shown in f and g. Our simulations show that there exhibits another mode with eigenfrequency within the band gap (gray open circles). This mode, however, has only negligible perturbation to the dielectric mode due to distinctive spatial symmetry, thus not affecting the quality of the defect cavity mode. d Cross-sectional schematic of the EOM structure, where the arrow profile shows the radio frequency (RF) electric field distribution and the color profile shows the optical cavity mode field distribution, both simulated by the FEM method. e Lattice constant a as a function of position, which is optimized for low insertion loss together with high radiation-limited optical Q. f Top view of the FEM-simulated optical mode field profile of the fundamental TE-like cavity mode TE01⁰. The left inset shows the orientation of the LN crystal where the optical axis is along the z direction. g Simulated optical mode field profile of the second-order TE-like cavity mode TE01¹. The scale bar on the left represents the strength of normalized electrical field (Enorm) for d, f, g.CC BY · PubMed Central
Fig. 2 Scanning electron microscopic (SEM) image of a fabricated EOM device. a Full SEM image of the whole-device structure. The region highlighted in red is the electrode used to drive the photonic-crystal nanoresonator. That highlighted in blue indicates the large metal pad used for contacting the RF probe. The green region indicates the electrode that can be shrunk to in the future design. b Zoom-in image of the photonic-crystal resonator and electrodes, corresponding to the dashed rectangular region in a. c Further zoom-in image showing the detailed structure of the photonic-crystal defects cavity, corresponding to the dashed rectangular region in b.
Fig. 2 Scanning electron microscopic (SEM) image of a fabricated EOM device. a Full SEM image of the whole-device structure. The region highlighted in red is the electrode used to drive the photonic-crystal nanoresonator. That highlighted in blue indicates the large metal pad used for contacting the RF probe. The green region indicates the electrode that can be shrunk to in the future design. b Zoom-in image of the photonic-crystal resonator and electrodes, corresponding to the dashed rectangular region in a. c Further zoom-in image showing the detailed structure of the photonic-crystal defects cavity, corresponding to the dashed rectangular region in b.CC BY · PubMed Central
Fig. 3 Experimental testing setup. Light is coupled into and out of the EOM chip via one lensed fiber. The inset shows an optical microscopic image of an EOM with the RF probe in contact. The equipment in the highlighted dashed box is used for characterizing the performance of electro-optic modulation. VOA variable optical attenuator, MZI Mach–Zehnder interferometer, EDFA erbium-doped fiber amplifier, BPF bandpass filter, MNA, microwave network analyzer, PRBS pseudo-random binary sequence source.
Fig. 3 Experimental testing setup. Light is coupled into and out of the EOM chip via one lensed fiber. The inset shows an optical microscopic image of an EOM with the RF probe in contact. The equipment in the highlighted dashed box is used for characterizing the performance of electro-optic modulation. VOA variable optical attenuator, MZI Mach–Zehnder interferometer, EDFA erbium-doped fiber amplifier, BPF bandpass filter, MNA, microwave network analyzer, PRBS pseudo-random binary sequence source.CC BY · PubMed Central
Fig. 4 Linear optical property of a fabricated LN photonic-crystal EOM. a Laser-scanned transmission spectrum in the telecom band. b Detailed transmission spectrum of the fundamental TE-like cavity mode TE01⁰ at a wavelength of 1554.47 nm, with the experimental data shown in blue and the theoretical fitting shown in red.
Fig. 4 Linear optical property of a fabricated LN photonic-crystal EOM. a Laser-scanned transmission spectrum in the telecom band. b Detailed transmission spectrum of the fundamental TE-like cavity mode TE01⁰ at a wavelength of 1554.47 nm, with the experimental data shown in blue and the theoretical fitting shown in red.CC BY · PubMed Central
Fig. 5 Electro-optic tuning property of an LN photonic-crystal EOM. a Recorded transmission spectrum of the EOM cavity as a function of applied DC voltage from 0 to 4.5 V, with a voltage step of 0.5 V. b Recorded resonance shift as a function of applied DC voltage, where the experimental data are shown in black dots and the blue line is a linear fitting to the data.
Fig. 5 Electro-optic tuning property of an LN photonic-crystal EOM. a Recorded transmission spectrum of the EOM cavity as a function of applied DC voltage from 0 to 4.5 V, with a voltage step of 0.5 V. b Recorded resonance shift as a function of applied DC voltage, where the experimental data are shown in black dots and the blue line is a linear fitting to the data.CC BY · PubMed Central
Fig. 6 Electro-optic modulation of a high-Q optical cavity resonance. a Recorded transmission spectra of the TE01⁰ cavity mode with RF driving signal at seven different powers from 0 to 12 mW, with a power step of 2 mW, modulated at 0.6 GHz. b Same as a but with a modulation frequency of 2.0 GHz. c Detailed spectrum (blue) with RF driving signal at 2.0 GHz with a power of 16 mW. The gray curves show the created individual sidebands with Lorentzian-shape resonances and the dashed vertical lines indicates their relative frequency positions. The sum of all gray curves is showed in red, which is fitted by the theory. d Recorded transmission spectra at different RF modulation frequencies varying from 0.4 to 3.0 GHz, with a frequency step of 0.2 GHz. The RF driving power is 16 mW.
Fig. 6 Electro-optic modulation of a high-Q optical cavity resonance. a Recorded transmission spectra of the TE01⁰ cavity mode with RF driving signal at seven different powers from 0 to 12 mW, with a power step of 2 mW, modulated at 0.6 GHz. b Same as a but with a modulation frequency of 2.0 GHz. c Detailed spectrum (blue) with RF driving signal at 2.0 GHz with a power of 16 mW. The gray curves show the created individual sidebands with Lorentzian-shape resonances and the dashed vertical lines indicates their relative frequency positions. The sum of all gray curves is showed in red, which is fitted by the theory. d Recorded transmission spectra at different RF modulation frequencies varying from 0.4 to 3.0 GHz, with a frequency step of 0.2 GHz. The RF driving power is 16 mW.CC BY · PubMed Central
Fig. 7 High-speed electro-optic switching. a Recorded scattering parameter S21 for two devices with optical Q of ~14,000 (blue curve) and ~20,000 (orange curve), respectively. The gray regions represents the 3-dB bandwidth limit for two devices, respectively, and the dashed line indicates the 3-dB limit of S21. The inset shows the S11 reflection scattering parameter for both devices. b, c Eye diagrams of the photonic-crystal EOM output, measured with 27−1 NRZ PRBS with a driving voltage of Vpp = 2 V. The laser wavelength was locked at half wave into the cavity resonance.
Fig. 7 High-speed electro-optic switching. a Recorded scattering parameter S21 for two devices with optical Q of ~14,000 (blue curve) and ~20,000 (orange curve), respectively. The gray regions represents the 3-dB bandwidth limit for two devices, respectively, and the dashed line indicates the 3-dB limit of S21. The inset shows the S11 reflection scattering parameter for both devices. b, c Eye diagrams of the photonic-crystal EOM output, measured with 27−1 NRZ PRBS with a driving voltage of Vpp = 2 V. The laser wavelength was locked at half wave into the cavity resonance.CC BY · PubMed Central
Fig. 8 Numerical modeling of electro-optic coupling. a Schematic of half of the cross-section of the EOM structure. “Gap” denotes the spacing between the gold electrode and the LN cavity, and “tw” denotes the thickness of the waveguide wing layer. b, c Electro-optic tuning efficiency and optical quality factor of the device as a function of Gap and tw, simulated by the FEM method. The red column represents the parameter design used for the EOMs demonstrated in the main text. The blue column shows another design with broader bandwidth and enhanced electro-optic coupling. The individual column at the left of each plot indicates the case when tw = 0 μm and gap = 2.5 μm, for a device with full surrounding air cladding.
Fig. 8 Numerical modeling of electro-optic coupling. a Schematic of half of the cross-section of the EOM structure. “Gap” denotes the spacing between the gold electrode and the LN cavity, and “tw” denotes the thickness of the waveguide wing layer. b, c Electro-optic tuning efficiency and optical quality factor of the device as a function of Gap and tw, simulated by the FEM method. The red column represents the parameter design used for the EOMs demonstrated in the main text. The blue column shows another design with broader bandwidth and enhanced electro-optic coupling. The individual column at the left of each plot indicates the case when tw = 0 μm and gap = 2.5 μm, for a device with full surrounding air cladding.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 49 references

Research works printed but not linked: 1

  1. Rao, A. & Fathpour, S. Compact lithium niobate electrooptic modulators. IEEE J. Sel. Top. Quant. Electron. 24, 3400114 (2018).

Cited by

See all 427

Metadata

Authors
Li, M., Ling, J., He, Y., Javid, U. A., Xue, S., & Lin, Q.
Affiliations
University of Rochester (US)
Corresponding author
Lin, Qiang
Venue
Nature Communications
Published
2020-08-17
Volume
11
Issue
1
Pages
4123-4123
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3009653279
Cited by
427
References
49
Citations by year
2026: 45 · 2025: 97 · 2024: 99 · 2023: 83 · 2022: 56 · 2021: 39 · 2020: 8
FWCI
18.91
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Figshare (submittedVersion, cc-by)
  • arXiv (Cornell University) (cc-by)
Funders
  • National Science Foundation (EFMA- 1641099, ECCS-1810169, and ECCS-1842691)
  • United States Department of Defense | Defense Threat Reduction Agency (HDTRA11810047)
  • United States Department of Defense | Defense Advanced Research Projects Agency (HR00112090012)
Topics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photorefractive and Nonlinear Optics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photonic Crystals and Applications
Keywords
lithium niobate, electro-optic modulator, thin-film lithium niobate, photonic integrated circuits, high-speed modulation, low-power optical switching, tuning efficiency, microwave photonics, quantum photonics

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Lithium niobate photonic-crystal electro-optic modulator. https://app.cochat.ai/papers/10.1038/s41467-020-17950-7
The paper
Li, M., Ling, J., He, Y., Javid, U. A., Xue, S., & Lin, Q. (2020). Lithium niobate photonic-crystal electro-optic modulator. Nature Communications. https://doi.org/10.1038/s41467-020-17950-7

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.