CoChat

Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture

Open access

Published version of a preprint

The DOI matches its Crossref record; 61 of the 63 references it cites were found in a registry or an index.

Abstract

All-inorganic CsPbI 3 perovskite quantum dots have received substantial research interest for photovoltaic applications because of higher efficiency compared to solar cells using other quantum dots materials and the various exciting properties that perovskites have to offer. These quantum dot devices also exhibit good mechanical stability amongst various thin-film photovoltaic technologies. We demonstrate higher mechanical endurance of quantum dot films compared to bulk thin film and highlight the importance of further research on high-performance and flexible optoelectronic devices using nanoscale grains as an advantage. Specifically, we develop a hybrid interfacial architecture consisting of CsPbI 3 quantum dot/PCBM heterojunction, enabling an energy cascade for efficient charge transfer and mechanical adhesion. The champion CsPbI 3 quantum dot solar cell has an efficiency of 15.1% (stabilized power output of 14.61%), which is among the highest report to date. Building on this strategy, we further demonstrate a highest efficiency of 12.3% in flexible quantum dot photovoltaics.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-20749-1

Cites

61 of 61 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 The preparation and properties of CsPbI3 QD and CsPbI3 QD/PCBM films. a Schematic of the fabrication of pristine, control and hybrid CsPbI3 QD films. b FTIR spectra of pristine, control, and hybrid films on SnO2/ITO glass substrates (characteristic peaks of organic species are highlighted by the red background). c, d 2D time-wavelength-dependent TA color maps of the control and the hybrid CsPbI3 QD films excited at 600 nm, the excitation fluence is 4.2 µJ/cm2/pulse. e Normalized TA dynamics of the ground-state bleach (GSB: 670 nm) for control and hybrid CsPbI3 QD films. For the control film, the components are τ1 = 1.3 ps, τ2 = 52.3 ps, and τ3 = 483.2 ps. For the hybrid film, the time components are extracted as τ1 = 1.4 ps, τ2 = 57.6 ps, and τ3 = 312.8 ps.
Fig. 1 The preparation and properties of CsPbI3 QD and CsPbI3 QD/PCBM films. a Schematic of the fabrication of pristine, control and hybrid CsPbI3 QD films. b FTIR spectra of pristine, control, and hybrid films on SnO2/ITO glass substrates (characteristic peaks of organic species are highlighted by the red background). c, d 2D time-wavelength-dependent TA color maps of the control and the hybrid CsPbI3 QD films excited at 600 nm, the excitation fluence is 4.2 µJ/cm2/pulse. e Normalized TA dynamics of the ground-state bleach (GSB: 670 nm) for control and hybrid CsPbI3 QD films. For the control film, the components are τ1 = 1.3 ps, τ2 = 52.3 ps, and τ3 = 483.2 ps. For the hybrid film, the time components are extracted as τ1 = 1.4 ps, τ2 = 57.6 ps, and τ3 = 312.8 ps.CC BY · PubMed Central
Fig. 2 Photovoltaic performance of solar cells. a, b Schematic diagram of the control device and target device. c J–V curves measured under AM 1.5 G solar irradiation at 100 mW/cm2 (inset: PCE distribution of control and target devices). d EQE curves of control and target devices (inset: stabilized power output of control and target devices).
Fig. 2 Photovoltaic performance of solar cells. a, b Schematic diagram of the control device and target device. c J–V curves measured under AM 1.5 G solar irradiation at 100 mW/cm2 (inset: PCE distribution of control and target devices). d EQE curves of control and target devices (inset: stabilized power output of control and target devices).CC BY · PubMed Central
Fig. 3 Characterization of QD solar cells. a EIS curves of champion control and target devices (inset: equivalent circuit). b, c TPV and TPC curves in champion control and target devices. d, e Band energy level diagram of the control and target devices.
Fig. 3 Characterization of QD solar cells. a EIS curves of champion control and target devices (inset: equivalent circuit). b, c TPV and TPC curves in champion control and target devices. d, e Band energy level diagram of the control and target devices.CC BY · PubMed Central
Fig. 4 Molecular interaction between QD and PCBM. a Schematic diagrams of the simulated unit cell, showing the perovskite slab system with and without a charged Pb-vacancy defect. b–d The electronic pDOS for three cases: without Pb-vacancy, with a neutral, and with a Pb-vacancy carrying a formal 2+ charge. e XPS signals of Pb 4f and I 3d in the control and the hybrid films. f Schematic diagram of the hydrophobic PCBM passivating surface of CsPbI3 QDs.
Fig. 4 Molecular interaction between QD and PCBM. a Schematic diagrams of the simulated unit cell, showing the perovskite slab system with and without a charged Pb-vacancy defect. b–d The electronic pDOS for three cases: without Pb-vacancy, with a neutral, and with a Pb-vacancy carrying a formal 2+ charge. e XPS signals of Pb 4f and I 3d in the control and the hybrid films. f Schematic diagram of the hydrophobic PCBM passivating surface of CsPbI3 QDs.CC BY · PubMed Central
Fig. 5 Flexible solar cells and mechanical stability. a J–V curves of the flexible champion device measured under AM 1.5 G solar irradiation at 100 mW/cm2 (inset: schematic diagram of flexible device architecture and PCE distribution of the flexible devices). b PCE of CsPbI3 QD solar cell and CsPbI2Br thin-film solar cell as a function of bending cycles (inset: photograph of the flexible QD solar cell). c Schematic diagram of the bending mechanical testing of QD and thin-film on a flexible substrate. d–g Top-view SEM images of the CsPbI3 QD film, PbS QD film, CsPbI2Br, and mixed perovskite thin-film fabricated on PET/ITO (2.5 × 2.5 cm) with mechanical bending (curvature radius of 0.75 cm), all films have a similar thickness between 300 and 400 nm.
Fig. 5 Flexible solar cells and mechanical stability. a J–V curves of the flexible champion device measured under AM 1.5 G solar irradiation at 100 mW/cm2 (inset: schematic diagram of flexible device architecture and PCE distribution of the flexible devices). b PCE of CsPbI3 QD solar cell and CsPbI2Br thin-film solar cell as a function of bending cycles (inset: photograph of the flexible QD solar cell). c Schematic diagram of the bending mechanical testing of QD and thin-film on a flexible substrate. d–g Top-view SEM images of the CsPbI3 QD film, PbS QD film, CsPbI2Br, and mixed perovskite thin-film fabricated on PET/ITO (2.5 × 2.5 cm) with mechanical bending (curvature radius of 0.75 cm), all films have a similar thickness between 300 and 400 nm.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 61 references

Cited by

See all 402

Metadata

Authors
Hu, L., Zhao, Q., Huang, S., Zheng, J., Guan, X., Patterson, R., Kim, J., Shi, L., Lin, C.-H., Lei, Q., Chu, D., Tao, W., Cheong, S., Tilley, R. D., Ho-Baillie, A. W. Y., Luther, J. M., Yuan, J., & Wu, T.
Affiliations
  • UNSW Sydney (AU)
  • National Laboratory of the Rockies (US)
  • Macquarie University (AU)
  • The University of Sydney (AU)
  • Soochow University (CN)
Corresponding author
Yuan, Jianyu
Venue
Nature Communications
Published
2021-01-20
Volume
12
Issue
1
Pages
466-466
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3070422161
Cited by
368
References
63
Citations by year
2026: 37 · 2025: 62 · 2024: 80 · 2023: 60 · 2022: 86 · 2021: 43
FWCI
19.78
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Research Square (acceptedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, other-oa)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • UNSWorks (University of New South Wales, Sydney, Australia) (submittedVersion, cc-by-nc-nd)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion, cc-by)
Funders
  • U.S. Department of Defense
  • U.S. Department of Energy (DE -AC36-08GO28308, 08GO28308, Contract No. DE-AC36-08GO28308, AC36‐08GO28308)
  • Analytical Center for the Government of the Russian Federation
  • University of New South Wales
  • National Natural Science Foundation of China (52073198, DE-AC36-08GO28308, 51803144)
  • Government of Jiangsu Province (BZ2020011)
  • Natural Science Foundation of Jiangsu Province (BZ2020011, BK20170337)
  • Soochow University
  • Priority Academic Program Development of Jiangsu Higher Education Institutions
  • Collaborative Innovation Center of Suzhou Nano Science and Technology
  • Australian Research Council (DP190103316)
  • National Key Research and Development Program of China (2019YFE0108600)
  • National Renewable Energy Laboratory (DE-AC36-08-GO28308, AC36-08GO28308)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
  • Physical Sciences › Materials Science › Materials Chemistry › Quantum Dots Synthesis And Properties
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
Keywords
CsPbI3 quantum dots, all-inorganic perovskites, flexible photovoltaics, mechanical stability, charge transfer, energy cascade, power conversion efficiency

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture. https://app.cochat.ai/papers/10.1038/s41467-020-20749-1
The paper
Hu, L., Zhao, Q., Huang, S., Zheng, J., Guan, X., Patterson, R., Kim, J., Shi, L., Lin, C.-H., Lei, Q., Chu, D., Tao, W., Cheong, S., Tilley, R. D., Ho-Baillie, A. W. Y., Luther, J. M., Yuan, J., & Wu, T. (2021). Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture. Nature Communications. https://doi.org/10.1038/s41467-020-20749-1

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.