The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries
Open accessAbstract
Engineered polycrystalline electrodes are critical to the cycling stability and safety of lithium-ion batteries, yet it is challenging to construct high-quality coatings at both the primary- and secondary-particle levels. Here we present a room-temperature synthesis route to achieve a full surface coverage of secondary particles and facile infusion into grain boundaries, and thus offer a complete ‘coating-plus-infusion’ strategy. Cobalt boride metallic glass was successfully applied to a Ni-rich layered cathode LiNi0.8Co0.1Mn0.1O2. It dramatically improved the rate capability and cycling stability, including under high-discharge-rate and elevated-temperature conditions and in pouch full-cells. The superior performance originates from a simultaneous suppression of the microstructural degradation of the intergranular cracking and of side reactions with the electrolyte. Atomistic simulations identified the critical role of strong selective interfacial bonding, which offers not only a large chemical driving force to ensure uniform reactive wetting and facile infusion, but also lowers the surface/interface oxygen activity, which contributes to the exceptional mechanical and electrochemical stabilities of the infused electrode. Coating is commonly used to improve electrode performance in batteries, but it is challenging to achieve and maintain complete coverage of electrode particles during cycling. Here the authors present a coating-and-infusion approach on Ni-rich cathodes that effectively retards stress corrosion cracking.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data
Momma, K., & Izumi, F. (2011) · Journal of Applied Crystallography · doi:10.1107/s0021889811038970 · Cited by 26,054
Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study
Dudarev, S. L., Botton, G. A., Savrasov, S. Y., Humphreys, C. J., & Sutton, A. P. (1998) · Physical Review B · doi:10.1103/physrevb.57.1505 · Cited by 15,173
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
High-nickel layered oxide cathodes for lithium-based automotive batteries
Li, W., Erickson, E. M., & Manthiram, A. (2020) · Nature Energy · doi:10.1038/s41560-019-0513-0 · Cited by 1,754
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Self-citation
Cited by
Compositionally complex doping for zero-strain zero-cobalt layered cathodes
Zhang, R., Wang, C., Zou, P., Lin, R., Ma, L., Yin, L., Li, T., Xu, W., Jia, H., Li, Q., et al. (2022) · Nature · doi:10.1038/s41586-022-05115-z · Cited by 785
Anion-enrichment interface enables high-voltage anode-free lithium metal batteries
Mao, M., Ji, X., Wang, Q., Lin, Z., Li, M., Liu, T., Wang, C., Hu, Y.-S., Li, H., Huang, X., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-36853-x · Cited by 418
Revitalizing interface in protonic ceramic cells by acid etch
Bian, W., Wu, W., Wang, B., Tang, W., Zhou, M., Jin, C., Ding, H., Fan, W., Dong, Y., Li, J., et al. (2022) · Nature · doi:10.1038/s41586-022-04457-y · Cited by 404
Self-citationLi, Z., Yu, R., Weng, S., Zhang, Q., Wang, X., & Guo, X. (2023) · Nature Communications · doi:10.1038/s41467-023-35857-x · Cited by 341
Designing Cathodes and Cathode Active Materials for Solid‐State Batteries
Minnmann, P., Strauss, F., Bielefeld, A., Ruess, R., Adelhelm, P., Burkhardt, S., Dreyer, S. L., Trevisanello, E., Ehrenberg, H., Brezesinski, T., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201425 · Cited by 277
Metadata
- Authors
- Yoon, M., Dong, Y., Hwang, J., Sung, J., Cha, H., Ahn, K., Huang, Y., Kang, S. J., Li, J., & Cho, J.
- Venue
- Nature Energy
- Published
- 2021-03-01
- Volume
- 6
- Issue
- 4
- Pages
- 362-371
- ISSN
- 2058-7546 (ISSN-L)
- OpenAlex
- W3135713975
- Cited by
- 539
- References
- 46
- FWCI
- 26.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries. https://app.cochat.ai/papers/10.1038/s41560-021-00782-0
- The paper
- Yoon, M., Dong, Y., Hwang, J., Sung, J., Cha, H., Ahn, K., Huang, Y., Kang, S. J., Li, J., & Cho, J. (2021). Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries. Nature Energy. https://doi.org/10.1038/s41560-021-00782-0
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.