Video-rate hyperspectral camera based on a CMOS-compatible random array of Fabry–Pérot filters
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Hyperspectral (HS) imaging provides rich spatial and spectral information and extends image inspection beyond human perception. Existing approaches, however, suffer from several drawbacks such as low sensitivity, resolution and/or frame rate, which confines HS cameras to scientific laboratories. Here we develop a video-rate HS camera capable of collecting spectral information on real-world scenes with sensitivities and spatial resolutions comparable with those of a typical RGB camera. Our camera uses compressive sensing, whereby spatial–spectral encoding is achieved with an array of 64 complementary metal–oxide–semiconductor (CMOS)-compatible Fabry–Pérot filters placed onto a monochromatic image sensor. The array affords high optical transmission while minimizing the reconstruction error in subsequent iterative image reconstruction. The experimentally measured sensitivity of 45% for visible light, the spatial resolution of 3 px for 3 dB contrast, and the frame rate of 32.3 fps at VGA resolution meet the requirements for practical use. For further acceleration, we show that AI-based image reconstruction affords operation at 34.4 fps and full high-definition resolution. By enabling practical sensitivity, resolution and frame rate together with compact size and data compression, our HS camera holds great promise for the adoption of HS technology in real-world scenarios, including consumer applications such as smartphones and drones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction To Compressive Sampling
Candes, E. J., & Wakin, M. B. (2008) · IEEE Signal Processing Magazine · doi:10.1109/msp.2007.914731 · Cited by 10,017
A New TwIST: Two-Step Iterative Shrinkage/Thresholding Algorithms for Image Restoration
Bioucas-Dias, J. M., & Figueiredo, M. A. T. (2007) · IEEE Transactions on Image Processing · doi:10.1109/tip.2007.909319 · Cited by 2,064 · cited 2×
“Considering the required randomness and fabrication process complexity, 64 Fabry–Pérot filters are designed; half (32) of the filters have top and bottom DBRs with a cavity layer in between, whereas the other half (32) have only a bottom DBR with a cavity layer.”
BackgroundMethod
Cited by
Ha, S. T., Li, Q., Yang, J. K. W., Demir, H. V., Brongersma, M. L., & Kuznetsov, A. I. (2024) · Science · doi:10.1126/science.adm7442 · Cited by 112
Metadata
- Authors
- Yako, M., Yamaoka, Y., Kiyohara, T., Hosokawa, C., Noda, A., Tack, K., Spooren, N., Hirasawa, T., & Ishikawa, A.
- Venue
- Nature Photonics
- Published
- 2023-01-23
- Volume
- 17
- Issue
- 3
- Pages
- 218-223
- ISSN
- 1749-4885 (ISSN-L)
- 1749-4893
- OpenAlex
- W4317815839
- Cited by
- 169
- References
- 2
- FWCI
- 23.81
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Video-rate hyperspectral camera based on a CMOS-compatible random array of Fabry–Pérot filters. https://app.cochat.ai/papers/10.1038/s41566-022-01141-5
- The paper
- Yako, M., Yamaoka, Y., Kiyohara, T., Hosokawa, C., Noda, A., Tack, K., Spooren, N., Hirasawa, T., & Ishikawa, A. (2023). Video-rate hyperspectral camera based on a CMOS-compatible random array of Fabry–Pérot filters. Nature Photonics. https://doi.org/10.1038/s41566-022-01141-5
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.