Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.

Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%

Open access
Kim, Hui-Seon, Lee, Chang-Ryul, Im, Jeong-Hyeok, Lee, Ki-Beom, Moehl, Thomas, Marchioro, Arianna, Moon, Soo-Jin, Humphry-Baker, Robin, Yum, Jun-Ho, Moser, Jacques E., Grätzel, Michael, Park, Nam-Gyu · 2012 · Scientific Reports

Abstract

We report on solid-state mesoscopic heterojunction solar cells employing nanoparticles (NPs) of methyl ammonium lead iodide (CH(3)NH(3))PbI(3) as light harvesters. The perovskite NPs were produced by reaction of methylammonium iodide with PbI(2) and deposited onto a submicron-thick mesoscopic TiO(2) film, whose pores were infiltrated with the hole-conductor spiro-MeOTAD. Illumination with standard AM-1.5 sunlight generated large photocurrents (J(SC)) exceeding 17 mA/cm(2), an open circuit photovoltage (V(OC)) of 0.888 V and a fill factor (FF) of 0.62 yielding a power conversion efficiency (PCE) of 9.7%, the highest reported to date for such cells. Femto second laser studies combined with photo-induced absorption measurements showed charge separation to proceed via hole injection from the excited (CH(3)NH(3))PbI(3) NPs into the spiro-MeOTAD followed by electron transfer to the mesoscopic TiO(2) film. The use of a solid hole conductor dramatically improved the device stability compared to (CH(3)NH(3))PbI(3) -sensitized liquid junction cells.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/srep00591

Cites

27 of 27 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Solid-state device and its cross-sectional meso-structure. (a) Real solid-state device. (b) Cross-sectional structure of the device. (c) Cross-sectional SEM image of the device. (d) Active layer-underlayer-FTO interfacial junction structure.
Figure 1 Solid-state device and its cross-sectional meso-structure. (a) Real solid-state device. (b) Cross-sectional structure of the device. (c) Cross-sectional SEM image of the device. (d) Active layer-underlayer-FTO interfacial junction structure.CC BY-NC-SA · PubMed Central
Figure 2 Diffuse reflectance and UPS spectra for (CH3NH3)PbI3 perovskite sensitizer. (a) Diffuse reflectance spectrum of the (CH3NH3)PbI3-sensitized TiO2 film. (b) Transformed Kubelka-Munk spectrum of the (CH3NH3)PbI3-sensitized TiO2 film. (c) UPS spectrum of the (CH3NH3)PbI3-sensitized TiO2 film. (d) Schematic energy level diagram of TiO2, (CH3NH3)PbI3, and spiro-MeOTAD.
Figure 2 Diffuse reflectance and UPS spectra for (CH3NH3)PbI3 perovskite sensitizer. (a) Diffuse reflectance spectrum of the (CH3NH3)PbI3-sensitized TiO2 film. (b) Transformed Kubelka-Munk spectrum of the (CH3NH3)PbI3-sensitized TiO2 film. (c) UPS spectrum of the (CH3NH3)PbI3-sensitized TiO2 film. (d) Schematic energy level diagram of TiO2, (CH3NH3)PbI3, and spiro-MeOTAD.CC BY-NC-SA · PubMed Central
Figure 3 Photovoltaic characteristics of (CH3NH3)PbI3 perovskite sensitized solar cell. (a) Photocurrent density as a function of the forward bias voltage. (b) IPCE as function of incident wavelength. (c) The short circuit photo-current density as function of light intensity.
Figure 3 Photovoltaic characteristics of (CH3NH3)PbI3 perovskite sensitized solar cell. (a) Photocurrent density as a function of the forward bias voltage. (b) IPCE as function of incident wavelength. (c) The short circuit photo-current density as function of light intensity.CC BY-NC-SA · PubMed Central
Figure 4 Effect of TiO2 film thickness on the key photovoltaic performance parameters. (a) Short-circuit current density (JSC), (b) Open circuit voltage (VOC), (c) fill factor (FF), and (d) power conversion efficiency (PCE).
Figure 4 Effect of TiO2 film thickness on the key photovoltaic performance parameters. (a) Short-circuit current density (JSC), (b) Open circuit voltage (VOC), (c) fill factor (FF), and (d) power conversion efficiency (PCE).CC BY-NC-SA · PubMed Central
Figure 5 IS measurements as TiO2 thickness: red 0.6 µm, blue 1.15 µm and green 1.4 µm. (a) Dark current during the IS measurements. (b) Recombination resistance extracted from the IS measurements in the dark. (c) Recombination resistance (solid lines) and accompanying capacitance (dashed lines) from IS measurements under illumination. (d) Electron lifetime under illumination.
Figure 5 IS measurements as TiO2 thickness: red 0.6 µm, blue 1.15 µm and green 1.4 µm. (a) Dark current during the IS measurements. (b) Recombination resistance extracted from the IS measurements in the dark. (c) Recombination resistance (solid lines) and accompanying capacitance (dashed lines) from IS measurements under illumination. (d) Electron lifetime under illumination.CC BY-NC-SA · PubMed Central
Figure 6 Femtosecond transient absorbance spectra with λexc = 580 nm and WLC probe of a) (CH3NH3)PbI3/Al2O3, b) (CH3NH3)PbI3/TiO2, c) Spiro/(CH3NH3)PbI3/Al2O3, and d) Spiro/(CH3NH3)PbI3/TiO2, recorded at various time delays after excitation (color lines). Black dashed lines represent the absorbance spectrum of the sample (scaled by a factor –0.01). The wavelengths region around laser excitation (555 – 630 nm) is not shown.
Figure 6 Femtosecond transient absorbance spectra with λexc = 580 nm and WLC probe of a) (CH3NH3)PbI3/Al2O3, b) (CH3NH3)PbI3/TiO2, c) Spiro/(CH3NH3)PbI3/Al2O3, and d) Spiro/(CH3NH3)PbI3/TiO2, recorded at various time delays after excitation (color lines). Black dashed lines represent the absorbance spectrum of the sample (scaled by a factor –0.01). The wavelengths region around laser excitation (555 – 630 nm) is not shown.CC BY-NC-SA · PubMed Central
Figure 7 Performance. Stability of (CH3NH3)PbI3 sensitized solid-state solar cell stored in air at room temperature without encapsulation and measured under one sun illumination.
Figure 7 Performance. Stability of (CH3NH3)PbI3 sensitized solid-state solar cell stored in air at room temperature without encapsulation and measured under one sun illumination.CC BY-NC-SA · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 27 references

Cited by

See all 8,092

Metadata

Authors
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., Grätzel, M., & Park, N.-G.
Affiliations
  • Sungkyunkwan University (KR)
  • École Polytechnique Fédérale de Lausanne (CH)
Corresponding author
Park, Nam-Gyu
Venue
Scientific Reports
Published
2012-08-21
Volume
2
Issue
1
Pages
591-591
ISSN
2045-2322 (ISSN-L)
OpenAlex
W2169328609
Cited by
8,092
References
27
Citations by year
2026: 252 · 2025: 339 · 2024: 449 · 2023: 496 · 2022: 588 · 2021: 732 · 2020: 669 · 2019: 763 · 2018: 885 · 2017: 858 · 2016: 859 · 2015: 665 · 2014: 413 · 2013: 114 · 2012: 5
FWCI
244.61
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by-nc-sa)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-sa)
  • PubMed Central (publishedVersion, cc-by-nc-sa)
  • PubMed (publishedVersion)
  • Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
  • Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
  • King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion, cc-by-nc-sa)
Funders
  • National Research Foundation
  • École Polytechnique Fédérale de Lausanne
  • Sungkyunkwan University
  • Ministry of Knowledge Economy (20103020010010)
  • National Research Foundation of Korea
  • King Abdullah University of Science and Technology (KUS-C1-015-21)
  • Ministry of Education, Science and Technology (R31-2008-10029, 2010-0014992, 2010-0028821)
  • Korea Institute of Energy Technology Evaluation and Planning
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
Keywords
perovskite solar cells, methylammonium lead iodide, all-solid-state solar cells, spiro-OMeTAD, hole injection, charge separation, electron transfer, power conversion efficiency, device stability, femtosecond spectroscopy, photoinduced absorption
MeSH terms
Energy-Generating Resources, Equipment Design, Iodides, Lead, Oxides, Solar Energy, Titanium, Absorptiometry, Photon, Calcium Compounds, Metal Nanoparticles, Dielectric Spectroscopy

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%. https://app.cochat.ai/papers/10.1038/srep00591
The paper
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., Grätzel, M., & Park, N.-G. (2012). Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%. Scientific Reports. https://doi.org/10.1038/srep00591

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.