The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
TiO2 modified FeS Nanostructures with Enhanced Electrochemical Performance for Lithium-Ion Batteries
Open accessAbstract
Anatase TiO2 modified FeS nanowires assembled by numerous nanosheets were synthesized by using a typical hydrothermal method. The carbon-free nanocoated composite electrodes exhibit improved reversible capacity of 510 mAh g(-1) after 100 discharge/charge cycles at 200 mA g(-1), much higher than that of the pristine FeS nanostructures, and long-term cycling stability with little performance degradation even after 500 discharge/charge cycles at current density of 400 mA g(-1). Full batteries fabricated using the FeS@TiO2 nanostructures anode and the LiMn2O4 nanowires cathode with excellent stability, and good rate capacities could also be achieved. The enhanced electrochemical performance of the composite electrodes can be attributed to the improved conductively of the integrated electrodes and the enhanced kinetics of lithium insertion/extraction at the electrode/electrolyte interface because of the incorporation of anatase TiO2 phase.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chang, K., & Chen, W. (2011) · ACS Nano · doi:10.1021/nn200659w · Cited by 1,663
Cited by
Nanostructured metal sulfides for energy storage
Rui, X., Tan, H., & Yan, Q. (2014) · Nanoscale · doi:10.1039/c4nr03057e · Cited by 1,003
Flexible electronics based on inorganic nanowires
Liu, Z., Xu, J., Chen, D., & Shen, G. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00116h · Cited by 512
Self-citationYang, J., Zhu, G., Liu, Y., Xia, J., Ji, Z., Shen, X., & Wu, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600674 · Cited by 382
Shen, M., Ruan, C., Chen, Y., Jiang, C., Ai, K., & Lu, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507033x · Cited by 301
Wang, X., & Shen, G. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.011 · Cited by 298
Self-citation
Metadata
- Authors
- Wang, X., Xiang, Q., Liu, B., Wang, L., Luo, T., Chen, D., & Shen, G.
- Venue
- Scientific Reports
- Published
- 2013-06-18
- Volume
- 3
- Issue
- 1
- Pages
- 2007-2007
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2062143714
- Cited by
- 168
- References
- 1
- FWCI
- 12.98
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.