Gap plasmon-based metasurfaces for total control of reflected light
Open accessAbstract
In the quest to miniaturise photonics, it is of paramount importance to control light at the nanoscale. We reveal the main physical mechanism responsible for operation of gap plasmon-based gradient metasurfaces, comprising a periodic arrangement of metal nanobricks, and suggest that two degrees of freedom in the nanobrick geometry allow one to independently control the reflection phases of orthogonal light polarisations. We demonstrate, both theoretically and experimentally, how orthogonal linear polarisations of light at wavelengths close to 800 nm can be manipulated independently, efficiently and in a broad wavelength range by realising polarisation beam splitters and polarisation-independent beam steering, showing at the same time the robustness of metasurface designs towards fabrication tolerances. The presented approach establishes a new class of compact optical components, viz., plasmonic metasurfaces with controlled gradient birefringence, with no dielectric counterparts. It can straightforwardly be adapted to realise new optical components with hitherto inaccessible functionalities.
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
GSP-based metasurfaces operate in reflection, are simple to fabricate by one-step electron beam lithography, and, in the limit of negligible Ohmic losses, have the potential to manipulate light with 100% efficiency.
“The gradient metasurface only operates in reflection, but it has the advantage of being simple to fabricate (i.e., one-step of electron beam lithography) and (in the limit of negligible Ohmic losses) the potential to manipulate light with 100% efficiency.”
From Plasmonic metagratings for simultaneous determination of Stokes parameters (2015) · cites this paper as [27]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
The citation lists haven’t been fetched yet
References 30 · Cited by 368
- Authors
- Pors, A., Albrektsen, O., Radko, I. P., & Bozhevolnyi, S. I.
- Affiliations
- University of Southern Denmark (DK)
- Corresponding author
- Pors, Anders
- Venue
- Scientific Reports
- Published
- 2013-07-08
- Volume
- 3
- Issue
- 1
- Pages
- 2155-2155
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC3703605
- OpenAlex
- W2000120764
- Cited by
- 368
- References
- 30
- Citations by year
- 2026: 3 · 2025: 7 · 2024: 17 · 2023: 13 · 2022: 15 · 2021: 24 · 2020: 35 · 2019: 43 · 2018: 54 · 2017: 46 · 2016: 40 · 2015: 39 · 2014: 28 · 2013: 4
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Scientific Reports (publishedVersion, cc-by-nc-sa)
- Europe PMC (PubMed Central) (publishedVersion, cc-by-nc-sa)
- PubMed Central (publishedVersion, cc-by-nc-sa)
- PubMed (publishedVersion)
- University of Southern Denmark Research Portal (University of Southern Denmark) (submittedVersion, cc-by-nc-sa)
- Funders
- Danmarks Frie Forskningsfond (09-072949, 12-124690)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Metamaterials and Metasurfaces Applications
- Physical Sciences › Engineering › Biomedical Engineering › Plasmonic and Surface Plasmon Research
- Physical Sciences › Engineering › Aerospace Engineering › Advanced Antenna and Metasurface Technologies
- Keywords
- gap plasmons, plasmonic metasurfaces, gradient metasurfaces, reflection phase control, manufacturing tolerances, nanoscale light manipulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review