The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Hierarchically porous silicon–carbon–nitrogen hybrid materials towards highly efficient and selective adsorption of organic dyes
Open accessAbstract
The hierarchically macro/micro-porous silicon-carbon-nitrogen (Si-C-N) hybrid material was presented with novel functionalities of totally selective and highly efficient adsorption for organic dyes. The hybrid material was conveniently generated by the pyrolysis of commercial polysilazane precursors using polydivinylbenzene microspheres as sacrificial templates. Owing to the Van der Waals force between sp-hybridized carbon domains and triphenyl structure of dyes, and electrostatic interaction between dyes and Si-C-N matrix, it exhibites high adsorption capacity and good regeneration and recycling ability for the dyes with triphenyl structure, such as methyl blue (MB), acid fuchsin (AF), basic fuchsin and malachite green. The adsorption process is determined by both surface adsorption and intraparticle diffusion. According to the Langmuir model, the adsorption capacity is 1327.7 mg·g(-1) and 1084.5 mg·g(-1) for MB and AF, respectively, which is much higher than that of many other adsorbents. On the contrary, the hybrid materials do not adsorb the dyes with azo benzene structures, such as methyl orange, methyl red and congro red. Thus, the hierarchically porous Si-C-N hybrid material from a facile and low cost polymer-derived strategy provides a new perspective and possesses a significant potential in the treatment of wastewater with complex organic pollutants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mohammadi, N., Khani, H., Gupta, V. K., Amereh, E., & Agarwal, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.06.067 · Cited by 818
Cited by
Sun, M.-H., Huang, S.-Z., Chen, L.-H., Li, Y., Yang, X.-Y., Yuan, Z.-Y., & Su, B.-L. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00135a · Cited by 1,454
Hierarchically porous materials: synthesis strategies and structure design
Yang, X.-Y., Chen, L.-H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B.-L. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00829a · Cited by 1,439
Porous ceramics: Light in weight but heavy in energy and environment technologies
Chen, Y., Wang, N., Ola, O., Xia, Y., & Zhu, Y. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100589 · Cited by 441
Malachite green “a cationic dye” and its removal from aqueous solution by adsorption
Raval, N. P., Shah, P. U., & Shah, N. K. (2017) · Applied Water Science · doi:10.1007/s13201-016-0512-2 · Cited by 308
Pandey, S., Do, J. Y., Kim, J., & Kang, M. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.12.002 · Cited by 265
Metadata
- Authors
- Meng, L., Zhang, X., Tang, Y., Su, K., & Kong, J.
- Venue
- Scientific Reports
- Published
- 2015-01-21
- Volume
- 5
- Issue
- 1
- Pages
- 7910-7910
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W1998594654
- Cited by
- 180
- References
- 1
- FWCI
- 19.03
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hierarchically porous silicon–carbon–nitrogen hybrid materials towards highly efficient and selective adsorption of organic dyes. https://app.cochat.ai/papers/10.1038/srep07910
- The paper
- Meng, L., Zhang, X., Tang, Y., Su, K., & Kong, J. (2015). Hierarchically porous silicon–carbon–nitrogen hybrid materials towards highly efficient and selective adsorption of organic dyes. Scientific Reports. https://doi.org/10.1038/srep07910
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.