The DOI matches its Crossref record.
Designed hybrid nanostructure with catalytic effect: beyond the theoretical capacity of SnO2 anode material for lithium ion batteries
Open accessAbstract
Transition metal cobalt (Co) nanoparticle was designed as catalyst to promote the conversion reaction of Sn to SnO 2 during the delithiation process which is deemed as an irreversible reaction. The designed nanocomposite, named as SnO 2/Co 3 O 4/reduced-graphene-oxide (rGO), was synthesized by a simple two-step method composed of hydrothermal (1 st step) and solvothermal (2 nd step) synthesis processes. Compared to the pristine SnO 2/rGO and SnO 2/Co 3 O 4 electrodes, SnO 2/Co 3 O 4/rGO nanocomposites exhibit significantly enhanced electrochemical performance as the anode material of lithium-ion batteries (LIBs). The SnO 2/Co 3 O 4/rGO nanocomposites can deliver high specific capacities of 1038 and 712 mAh g−1 at the current densities of 100 and 1000 mA g−1, respectively. In addition, the SnO 2/Co 3 O 4/rGO nanocomposites also exhibit 641 mAh g−1 at a high current density of 1000 mA g−1 after 900 cycles, indicating an ultra-long cycling stability under high current density. Through ex-situ TEM analysis, the excellent electrochemical performance was attributed to the catalytic effect of Co nanoparticles to promote the conversion of Sn to SnO 2 and the decomposition of Li 2 O during the delithiation process. Based on the results, herein we propose a new method in employing the catalyst to increase the capacity of alloying-dealloying type anode material to beyond its theoretical value and enhance the electrochemical performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Zhao, Y., Wang, L. P., Sougrati, M. T., Feng, Z., Leconte, Y., Fisher, A., Srinivasan, M., & Xu, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601424 · Cited by 586
Exploring Anomalous Charge Storage in Anode Materials for Next-Generation Li Rechargeable Batteries
Kim, H., Choi, W., Yoon, J., Um, J. H., Lee, W., Kim, J., Cabana, J., & Yoon, W.-S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00618 · Cited by 527
Facile Fabrication of MoS2-Modified SnO2 Hybrid Nanocomposite for Ultrasensitive Humidity Sensing
Zhang, D., Sun, Y., Li, P., & Zhang, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02206 · Cited by 515
Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review
Jung, J.-W., Lee, C.-L., Yu, S., & Kim, I.-D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta06844d · Cited by 402
Wang, Y., Kong, D., Shi, W., Liu, B., Sim, G. J., Ge, Q., & Yang, H. Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601057 · Cited by 317
Self-citation
Metadata
- Authors
- Wang, Y., Huang, Z. X., Shi, Y., Wong, J. I., Ding, M., & Yang, H. Y.
- Venue
- Scientific Reports
- Published
- 2015-03-17
- Volume
- 5
- Issue
- 1
- Pages
- 9164-9164
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W1981929833
- Cited by
- 161
- References
- 0
- FWCI
- 10.26
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.