The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Realizing Broadband and Invertible Linear-to-circular Polarization Converter with Ultrathin Single-layer Metasurface
Open accessAbstract
The arbitrary control of the polarization states of light has attracted the interest of the scientific community because of the wide range of modern optical applications that such control can afford. However, conventional polarization control setups are bulky and very often operate only within a narrow wavelength range, thereby resisting optical system miniaturization and integration. Here, we present the basic theory, simulated demonstration and in-depth analysis of a high-performance broadband and invertible linear-to-circular (LTC) polarization converter composed of a single-layer gold nanorod array with a total thickness of ~λ/70 for the near-infrared regime. This setup can transform a circularly polarized wave into a linearly polarized one or a linearly polarized wave with a wavelength-dependent electric field polarization angle into a circularly polarized one in the transmission mode. The broadband and invertible LTC polarization conversion can be attributed to the tailoring of the light interference at the subwavelength scale via the induction of the anisotropic optical resonance mode. This ultrathin single-layer metasurface relaxes the high-precision requirements of the structure parameters in general metasurfaces while retaining the polarization conversion performance. Our findings open up intriguing possibilities towards the realization of novel integrated metasurface-based photonics devices for polarization manipulation, modulation and phase retardation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flat optics with designer metasurfaces
Yu, N., & Capasso, F. (2014) · Nature Materials · doi:10.1038/nmat3839 · Cited by 5,984
Efficient and broadband quarter-wave plates by gap-plasmon resonators
Pors, A., & Bozhevolnyi, S. I. (2013) · Optics Express · doi:10.1364/oe.21.002942 · Cited by 140
Cited by
Fundamentals and Applications of Metasurfaces
Hsiao, H., Chu, C. H., & Tsai, D. P. (2017) · Small Methods · doi:10.1002/smtd.201600064 · Cited by 771
Gradient metasurfaces: a review of fundamentals and applications
Ding, F., Pors, A., & Bozhevolnyi, S. I. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aa8732 · Cited by 552
Information metamaterials and metasurfaces
Cui, T. J., Liu, S., & Zhang, L. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00548b · Cited by 455
Basiri, A., Chen, X., Bai, J., Amrollahi, P., Carpenter, J., Holman, Z., Wang, C., & Yao, Y. (2019) · Light: Science & Applications · doi:10.1038/s41377-019-0184-4 · Cited by 372
Metasurface‐Empowered Optical Multiplexing and Multifunction
Chen, S., Liu, W., Li, Z., Cheng, H., & Tian, J. (2020) · Advanced Materials · doi:10.1002/adma.201805912 · Cited by 312
Self-citation
Metadata
- Authors
- Li, Z., Liu, W., Cheng, H., Chen, S., & Tian, J.
- Venue
- Scientific Reports
- Published
- 2015-12-15
- Volume
- 5
- Issue
- 1
- Pages
- 18106-18106
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2259452275
- Cited by
- 172
- References
- 2
- FWCI
- 7.16
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.