Pore structure modified diatomite-supported PEG composites for thermal energy storage
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A series of novel composite phase change materials (PCMs) were tailored by blending PEG and five kinds of diatomite via a vacuum impregnation method. To enlarge its pore size and specific surface area, different modification approaches including calcination, acid treatment, alkali leaching and nano-silica decoration on the microstructure of diatomite were outlined. Among them, 8 min of 5 wt% NaOH dissolution at 70 °C has been proven to be the most effective and facile. While PEG melted during phase transformation, the maximum load of PEG could reach 70 wt.%, which was 46% higher than that of the raw diatomite. The apparent activation energy of PEG in the composite was 1031.85 kJ·mol−1, which was twice higher than that of the pristine PEG. Moreover, using the nano-silica decorated diatomite as carrier, the maximum PEG load was 66 wt%. The composite PCM was stable in terms of thermal and chemical manners even after 200 cycles of melting and freezing. All results indicated that the obtained composite PCMs were promising candidate materials for building applications due to its large latent heat, suitable phase change temperature, excellent chemical compatibility, improved supercooling extent, high thermal stability and long-term reliability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Feng, L., Zhao, W., Zheng, J., Frisco, S., Song, P., & Li, X. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.08.020 · Cited by 235
Cited by
Recent developments in phase change materials for energy storage applications: A review
Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522
Huang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701
Zhao, Y., Min, X., Huang, Z., Liu, Y., Wu, X., & Fang, M. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.078 · Cited by 369
Chen, X., Gao, H., Tang, Z., Dong, W., Li, A., & Wang, G. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01355b · Cited by 348
Li, A., Dong, C., Dong, W., Atinafu, D. G., Gao, H., Chen, X., & Wang, G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b09541 · Cited by 115
Metadata
- Authors
- Qian, T., Li, J., & Deng, Y.
- Venue
- Scientific Reports
- Published
- 2016-09-01
- Volume
- 6
- Issue
- 1
- Pages
- 32392-32392
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2513627606
- Cited by
- 115
- References
- 1
- FWCI
- 9.15
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pore structure modified diatomite-supported PEG composites for thermal energy storage. https://app.cochat.ai/papers/10.1038/srep32392
- The paper
- Qian, T., Li, J., & Deng, Y. (2016). Pore structure modified diatomite-supported PEG composites for thermal energy storage. Scientific Reports. https://doi.org/10.1038/srep32392
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.