Flexible all-polymer waveguide for low threshold amplified spontaneous emission
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
The fabrication of all polymer optical waveguides, based on a highly fluorescent conjugated polymer (CP) poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT) and a mechanically flexible and biodegradable polymer, cellulose acetate (CA), is reported. The replication by hot embossing of patterned surfaces in CA substrates, onto which high quality F8BT films can be easily processed by spin coating, is exploited to produce an entirely plastic device that exhibits low optical loss and low threshold for amplified spontaneous emission (ASE). As a result, highly transparent and flexible waveguides are obtained, with excellent optical properties that remain unaltered after bending, allowing them to be adapted in various flexible photonic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures



Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Perovskites, on the other hand, are processed at low temperatures from solution by simple and scalable methods [20], which enables them to be easily added to existing photonic integrated circuits (PICs), making them a great alternative for on chip light sources for the silicon nitride waveguide platforms.”
From Integrated perovskite lasers on a silicon nitride waveguide platform by cost-effective high throughput fabrication (2017) · cites this paper as [20]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Light-emitting diodes based on conjugated polymers
Burroughes, J. H., Bradley, D. D. C., Brown, A. R., Marks, R. N., Mackay, K., Friend, R. H., Burns, P. L., & Holmes, A. B. (1990) · Nature · doi:10.1038/347539a0 · Cited by 11,393
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
The path to ubiquitous and low-cost organic electronic appliances on plastic
Forrest, S. R. (2004) · Nature · doi:10.1038/nature02498 · Cited by 5,165
Device Physics of Solution‐Processed Organic Field‐Effect Transistors
Sirringhaus, H. (2005) · Advanced Materials · doi:10.1002/adma.200501152 · Cited by 1,737
Lasing from conjugated-polymer microcavities
Tessler, N., Denton, G. J., & Friend, R. H. (1996) · Nature · doi:10.1038/382695a0 · Cited by 1,336
Atom Transfer Radical Polymerization and the Synthesis of Polymeric Materials
Patten, T. E., & Matyjaszewski, K. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199808)10:12<901::aid-adma901>3.0.co;2-b · Cited by 896
Electrical Switching and Bistability in Organic/Polymeric Thin Films and Memory Devices
Yang, Y., Ouyang, J., Ma, L., Tseng, R. J. ‐., & Chu, C. ‐. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500429 · Cited by 580
DIRECT DETERMINATION OF OPTICAL GAIN IN SEMICONDUCTOR CRYSTALS
Shaklee, K. L., & Leheny, R. F. (1971) · Applied Physics Letters · doi:10.1063/1.1653501 · Cited by 489
Vector Finite Difference Modesolver for Anisotropic Dielectric Waveguides
Fallahkhair, A. B., Li, K. S., & Murphy, T. E. (2008) · Journal of Lightwave Technology · doi:10.1109/jlt.2008.923643 · Cited by 400
Donley, C. L., Zaumseil, J., Andreasen, J. W., Nielsen, M. M., Sirringhaus, H., Friend, R. H., & Kim, J.-S. (2005) · Journal of the American Chemical Society · doi:10.1021/ja051891j · Cited by 348
Cited by
Solution-processed nanographene distributed feedback lasers
Bonal, V., Muñoz‐Mármol, R., Gámez, F. G., Morales‐Vidal, M., Villalvilla, J. M., Boj, P. G., Quintana, J. A., Gu, Y., Wu, J., Casado, J., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-11336-0 · Cited by 85
Cegielski, P. J., Neutzner, S., Porschatis, C., Lerch, H., Bolten, J., Suckow, S., Kandada, A. R. S., Chmielak, B., Petrozza, A., Wahlbrink, T., et al. (2017) · Optics Express · doi:10.1364/oe.25.013199 · Cited by 67
Quintana, J. A., Villalvilla, J. M., Morales‐Vidal, M., Boj, P. G., Zhu, X., Ruangsupapichat, N., Tsuji, H., Nakamura, E., & Díaz‐García, M. A. (2017) · Advanced Optical Materials · doi:10.1002/adom.201700238 · Cited by 53
Bai, L., Liu, B., Han, Y., Yu, M., Wang, J., Zhang, X., Ou, C., Lin, J., Zhu, W.-S., Xie, L., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08980 · Cited by 46
Athanasiou, M., Papagiorgis, P. G., Manoli, A., Bernasconi, C., Bodnarchuk, M. I., Kovalenko, M. V., & Itskos, G. (2021) · ACS Photonics · doi:10.1021/acsphotonics.1c00565 · Cited by 38
Benas, J., Liang, F., Chen, W., Hung, C.-W., Chen, J., Zhou, Y., Han, S., Borsali, R., & Kuo, C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133701 · Cited by 35
Li, Z., Hu, P., Zhu, J., Gao, Y., Xiong, X., & Liu, R. (2018) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29254 · Cited by 35
Bonal, V., Quintana, J. A., Villalvilla, J. M., Boj, P. G., & Díaz‐García, M. A. (2019) · Scientific Reports · doi:10.1038/s41598-019-47589-4 · Cited by 34
Smirnov, J. R. C., Sousaraei, A., Osorio, M. R., Casado, S., Hernández, J. J., Wu, L., Zhang, Q., Xia, R., Granados, D., Wannemacher, R., et al. (2019) · npj Flexible Electronics · doi:10.1038/s41528-019-0062-4 · Cited by 32
Self-citationBlue and Deep‐Blue‐Emitting Organic Lasers with Top‐Layer Distributed Feedback Resonators
Bonal, V., Villalvilla, J. M., Quintana, J. A., Boj, P. G., Lin, N., Watanabe, S., Kazlauskas, K., Adomėnienė, O., Juršėnas, S., Tsuji, H., et al. (2020) · Advanced Optical Materials · doi:10.1002/adom.202001153 · Cited by 27
Morales‐Vidal, M., Quintana, J. A., Villalvilla, J. M., Boj, P. G., Nishioka, H., Tsuji, H., Nakamura, E., Whitworth, G. L., Turnbull, G. A., Samuel, I. D. W., et al. (2018) · Advanced Optical Materials · doi:10.1002/adom.201800069 · Cited by 25
Flexible Optical Amplifier for Visible-Light Communications Based on Organic–Inorganic Hybrids
Bastos, A. R. N., McKenna, B., Lima, M., André, P. S. D. B., Carlos, L. D., Evans, R. C., & Ferreira, R. A. S. (2018) · ACS Omega · doi:10.1021/acsomega.8b01726 · Cited by 24
Yan, X., Hai, G., Xu, H., Zhang, H., Zuo, Z.-Y., Zhang, Q., Xia, R., Sun, C., Smirnov, J. R. C., Sousaraei, A., et al. (2018) · Advanced Optical Materials · doi:10.1002/adom.201800263 · Cited by 20
Self-citationOrganic Semiconductor Micro/Nanocrystals for Laser Applications
Álvarez‐Conde, J., García‐Frutos, E. M., & Cabanillas‐González, J. (2021) · Molecules · doi:10.3390/molecules26040958 · Cited by 18
“Moreover, organic lasers can be processed by cost-effective solution-based methods [92], they have capabilities to confine and guide light due to their elevated refractive indexes [93] and they possess unique mechanical properties (flexibility and light weight) leading to new potential market niches for organic laser…”
BackgroundSelf-citationKang, J.-S., Kang, J., Sohn, Y., & Leung, K. T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17256 · Cited by 16
Copper complex-based photoinitiator for high resolution two-photon polymerization
Li, B., Lalevée, J., Mazur, L. M., Matczyszyn, K., Ravaine, S., & Jradi, S. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103741 · Cited by 15
Guillén, M. G., Gámez, F., Lopes‐Costa, T., Smirnov, J. R. C., Wannemacher, R., Cabanillas‐González, J., & Pedrosa, J. M. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.08.136 · Cited by 12
Self-citationYamazawa, C., Hirano, Y., Imoto, H., Tsutsumi, N., & Naka, K. (2021) · Chemical Communications · doi:10.1039/d0cc07521c · Cited by 11
Origin of Intramolecular Low‐Threshold Amplified Spontaneous Emission
Wei, Q., Duan, R., Zhang, Q., Xie, L., Xia, R., Yi, Y., Léonard, J., Haacke, S., Cabanillas‐González, J., Qian, Y., et al. (2021) · Advanced Optical Materials · doi:10.1002/adom.202001956 · Cited by 8
Self-citationLyamina, G. V., Ilela, A. E., Сергеевич, Д. Э., Petyukevich, M., & Толкачев, О. С. (2018) · Nanotechnologies in Russia · doi:10.1134/s1995078018030102 · Cited by 7
Top‐Layer Resonator Organic Distributed Feedback Laser for Label‐Free Refractive Index Sensing
Farrando‐Pérez, Á., Villalvilla, J. M., Quintana, J. A., Boj, P. G., & Díaz‐García, M. A. (2024) · Advanced Optical Materials · doi:10.1002/adom.202401284 · Cited by 6
Bonal, V., Quintana, J. A., Villalvilla, J. M., Boj, P. G., Muñoz‐Mármol, R., Mira-Martínez, J. C., & Díaz‐García, M. A. (2021) · Polymers · doi:10.3390/polym13213843 · Cited by 6
Soniya, N., Aswathy, S., Anagha, G. S., & Alee, K. S. (2020) · Journal of Applied Physics · doi:10.1063/5.0008196 · Cited by 4
Luminescence colour modulation in benzotriazole-derived waveguides
Donoso, B., Torres‐Moya, I., Álvarez‐Conde, J., Chacón, I., Díaz‐Ortiz, Á., Cabanillas‐González, J., & Prieto, P. (2023) · Dyes and Pigments · doi:10.1016/j.dyepig.2023.111583 · Cited by 3
Self-citationHigh Q Ultra‐Low Threshold Lasing in Conjugated Polymer Blend Microspheres Promoted by FRET
Sierra, J. G., Martin‐Merinero, A., Álvarez‐Conde, J., Vázquez, S. I., Cabanillas‐González, J., & Wannemacher, R. (2024) · Advanced Optical Materials · doi:10.1002/adom.202400161 · Cited by 3
Self-citationZhang, Q., Sun, H., Zhang, H., Jiang, M. F., Wu, X., Zhang, Z., Yang, T., Xia, R., & Cabanillas‐González, J. (2019) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201900176 · Cited by 3
Self-citationAsymmetric coupling coefficients induced amplified spontaneous emission in planar coupled waveguides
Soniya, N., Aswathy, S., Anagha, G. S., & Alee, K. S. (2021) · Journal of Optics · doi:10.1088/2040-8986/ac1957 · Cited by 1
Liang, J., Li, Y., & Guo, Z. (2021) · NANO · doi:10.1142/s1793292021501101
Beamforming OLEDs for sensing applications employing a nanostructured fluorescent waveguide layer
Buhl, J., Lüder, H., Nolte, T., Sbrisny, F. O., & Gerken, M. (2022) · Organic Photonic Materials and Devices · doi:10.1117/12.2608647
“Fluorescent polymers, such as poly(p-phenylene vinylene) (PPV) and associated copolymers, often exhibit intrinsically high refractive indices.(17,18) An appropriate polymer layer can thus be employed as a single-material fluorescent waveguide.”
BackgroundPasqués‐Gramage, P., Calvillo-Solís, G., Boj, P. G., Quintana, J. A., Villalvilla, J. M., & Díaz‐García, M. A. (2025) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.5c01592
New Photopolymer Materials for 3D Nanostructuring and Photonic Applications
Li, B. (2023) · theses.fr (ABES) · doi:10.70675/dccada77z5cd3z4796za0f5z3080fc318aec
Zhiganshina, E. R., Lyubova, T. S., Тараканова, A. В., Arsenyev, M. V., Сергеевич, К. Р., Анисимова, Н. В., Polushtaytsev, Y. V., Kozhanov, K. A., Pisarenko, A. V., Aleynik, D. Y., et al. (2026) · Polymers · doi:10.3390/polym18080958
“…this method in one-and two-photon stereolithography for creating macro and micro 3D objects of a given geometry (for example, optical waveguides [16,17], photonic crystals [18,19], drug delivery systems [20,21], functional microdevices based on polymers [22,23], biomaterials [24,25],…”
Lasing From Microspheres Based on Novel Blue Emitting Compounds
Mao, Y., Martin‐Merinero, A., Chen, D., Peng, J., Wannemacher, R., & Cabanillas‐González, J. (2026) · physica status solidi (a) · doi:10.1002/pssa.70422
Self-citation
Metadata
- Authors
- Smirnov, J. R. C., Zhang, Q., Wannemacher, R., Wu, L., Casado, S., Xia, R., Rodriguez, I., & Cabanillas-González, J.
- Affiliations
- Madrid Institute for Advanced Studies (ES)
- Nanjing University of Posts and Telecommunications (CN)
- Corresponding author
- Xia, Ruidong
- Venue
- Scientific Reports
- Published
- 2016-09-30
- Volume
- 6
- Issue
- 1
- Pages
- 34565-34565
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC5043348
- OpenAlex
- W2527095954
- Semantic Scholar
- 99dc968736928183b0dfe5928edf704b2c1beacc
- Cited by
- 33
- References
- 35
- Citations by year
- 2026: 2 · 2025: 1 · 2024: 2 · 2023: 3 · 2022: 1 · 2021: 8 · 2020: 2 · 2019: 4 · 2018: 6 · 2017: 4
- FWCI
- 2.15
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Hispana (acceptedVersion, cc-by-nc-nd)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, cc-by-nc-nd)
- UPM Digital Archive (Technical University of Madrid) (submittedVersion, cc-by-nc-nd)
- Funders
- National Natural Science Foundation of China (973 Program, 61376023, 2015CB932203, 61136003)
- China Scholarship Council
- Priority Academic Program Development of Jiangsu Higher Education Institutions
- National Key Research and Development Program of China (2015CB932203)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Light-Emitting Diodes Research
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor Lasers and Optical Devices
- Keywords
- polymer optical waveguides, amplified spontaneous emission, F8BT, cellulose acetate, hot embossing, flexible photonic devices, conjugated polymers, biodegradable polymers, low optical loss
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.