The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
3D Printed Graphene Based Energy Storage Devices
Open accessAbstract
3D printing technology provides a unique platform for rapid prototyping of numerous applications due to its ability to produce low cost 3D printed platforms. Herein, a graphene-based polylactic acid filament (graphene/PLA) has been 3D printed to fabricate a range of 3D disc electrode (3DE) configurations using a conventional RepRap fused deposition moulding (FDM) 3D printer, which requires no further modification/ex-situ curing step. To provide proof-of-concept, these 3D printed electrode architectures are characterised both electrochemically and physicochemically and are advantageously applied as freestanding anodes within Li-ion batteries and as solid-state supercapacitors. These freestanding anodes neglect the requirement for a current collector, thus offering a simplistic and cheaper alternative to traditional Li-ion based setups. Additionally, the ability of these devices’ to electrochemically produce hydrogen via the hydrogen evolution reaction (HER) as an alternative to currently utilised platinum based electrodes (with in electrolysers) is also performed. The 3DE demonstrates an unexpectedly high catalytic activity towards the HER (−0.46 V vs. SCE) upon the 1000th cycle, such potential is the closest observed to the desired value of platinum at (−0.25 V vs. SCE). We subsequently suggest that 3D printing of graphene-based conductive filaments allows for the simple fabrication of energy storage devices with bespoke and conceptual designs to be realised.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Biomimetic Hydrogen Evolution: MoS 2 Nanoparticles as Catalyst for Hydrogen Evolution
Hinnemann, B., Moses, P. G., Bonde, J., Jørgensen, K. P., Nielsen, J. H., Horch, S., Chorkendorff, I., & Nørskov, J. K. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0504690 · Cited by 4,065
Theory and Application of Cyclic Voltammetry for Measurement of Electrode Reaction Kinetics.
Nicholson, R. S. (1965) · Analytical Chemistry · doi:10.1021/ac60230a016 · Cited by 3,446
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Wang, Y., Li, X., Song, J., Xiao, L., Zeng, H., & Sun, H. (2015) · Advanced Materials · doi:10.1002/adma.201503573 · Cited by 1,267
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Kim, K., Coh, S., Tan, L. Z., Regan, W., Yuk, J. M., Chatterjee, E., Crommie, M. F., Cohen, M. L., Louie, S. G., & Zettl, A. (2012) · Physical Review Letters · doi:10.1103/physrevlett.108.246103 · Cited by 587
3D Printable Graphene Composite
Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481
Printing in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
Nanotrench Arrays Reveal Insight into Graphite Electrochemistry
Davies, T. J., Hyde, M. E., & Compton, R. G. (2005) · Angewandte Chemie · doi:10.1002/ange.200462750 · Cited by 302
Electrochemistry of Individual Monolayer Graphene Sheets
Li, W., Tan, C., Lowe, M. A., Abruña, H. D., & Ralph, D. C. (2011) · ACS Nano · doi:10.1021/nn103537q · Cited by 271
Three dimensional (3D) printed electrodes for interdigitated supercapacitors
Zhao, C., Wang, C., Gorkin, R., Beirne, S., Shu, K., & Wallace, G. G. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.013 · Cited by 213
3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels
Parekh, D. P., Ladd, C., Panich, L., Moussa, K., & Dickey, M. D. (2016) · Lab on a Chip · doi:10.1039/c6lc00198j · Cited by 205
Rymansaib, Z., Iravani, P., Emslie, E., Medvidović‐Kosanović, M., Sak‐Bosnar, M., Verdejo, R., & Marken, F. (2016) · Electroanalysis · doi:10.1002/elan.201600017 · Cited by 176
Leong, K. H., Chu, H. Y., Ibrahim, S., & Saravanan, P. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.43 · Cited by 168
Precise Control of the Number of Layers of Graphene by Picosecond Laser Thinning
Lin, Z., Ye, X., Han, J., Chen, Q., Fan, P., Zhang, H., Xie, D., Zhu, H., & Zhong, M. (2015) · Scientific Reports · doi:10.1038/srep11662 · Cited by 113
Rowley‐Neale, S. J., Brownson, D. A. C., Smith, G. C., Sawtell, D. A. G., Kelly, P. J., & Banks, C. E. (2015) · Nanoscale · doi:10.1039/c5nr05164a · Cited by 112
Self-citationKampouris, D. K., Ji, X., Randviir, E. P., & Banks, C. E. (2015) · RSC Advances · doi:10.1039/c4ra17132b · Cited by 107
Self-citationCumba, L. R., Foster, C. W., Brownson, D. A. C., Smith, J. P., Iniesta, J., Thakur, B., do Carmo, D. R., & Banks, C. E. (2016) · The Analyst · doi:10.1039/c6an00167j · Cited by 78
Self-citationThe electrochemical applications of quantum dots
Huang, H., & Zhu, J. (2013) · The Analyst · doi:10.1039/c3an01034a · Cited by 57
Burch, H. A., Isaacs, M. A., Wilson, K., Palmer, R. E., & Rees, N. V. (2016) · RSC Advances · doi:10.1039/c6ra03326a · Cited by 5
Research works printed but not linked: 9
- Brownson, D. A. C. et al. In situ electrochemical characterisation of graphene and various carbon-based electrode materials: an internal standard approach. RSC Adv. 5, 37281–37286 (2015). · doi:10.1039/c5ra03049h
- Nathan-Walleser, T. et al. 3D Micro-Extrusion of Graphene-based Active Electrodes: Towards High-Rate AC Line Filtering Performance Electrochemical Capacitors. Adv. Funct. Mat. 24, 4706–4716 (2014). · doi:10.1002/adfm.201304151
- Vergne, C. et al. Modifications of the Polylactic Acid Surface Properties by DBD Plasma Treatment at Atmospheric Pressure. J. Eng. Mater. Technol. 133, 030903–030903 (2011). · doi:10.1115/1.4004156
- Ji, X. et al. Oxygenated Edge Plane Sites Slow the Electron Transfer of the Ferro-/Ferricyanide Redox Couple at Graphite Electrodes. Chem Phys Chem 7, 1337–1344 (2006). · doi:10.1002/cphc.200600098
- Chen, P. & McCreery, R. L. Control of Electron Transfer Kinetics at Glassy Carbon Electrodes by Specific Surface Modification. Anal. Chem. 68, 3958–3965 (1996). · doi:10.1021/ac960492r
- Hallam, P. M. & Banks, C. E. A facile approach for quantifying the density of defects (edge plane sites) of carbon nanomaterials and related structures. Phys. Chem. Chem. Phys. 13, 1210–1213 (2011). · doi:10.1039/c0cp01562h
- Banks, C. E. & Compton, R. G. Exploring the electrocatalytic sites of carbon nanotubes for NADH detection: an edge plane pyrolytic graphite electrode study. Analyst 130, 1232–1239 (2005). · doi:10.1039/b508702c
- Lavagnini, I. et al. An Extended Method for the Practical Evaluation of the Standard Rate Constant from Cyclic Voltammetric Data. Electroanalysis 16, 505–506 (2004). · doi:10.1002/elan.200302851
- Banks, C. E. et al. The transport limited currents at insonated electrodes. Phys. Chem. Chem. Phys. 6, 3147–3152 (2004). · doi:10.1039/b403751k
Cited by
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Production and processing of graphene and related materials
Backes, C., Abdelkader, A. M., Alonso, C., Andrieux-Ledier, A., Arenal, R., Azpeitia, J., Balakrishnan, N., Banszerus, L., Barjon, J., Bartali, R., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab1e0a · Cited by 501
Parra-Cabrera, C., Achille, C., Kuhn, S., & Ameloot, R. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00631d · Cited by 493
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Metadata
- Authors
- Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E.
- Venue
- Scientific Reports
- Published
- 2017-03-03
- Volume
- 7
- Issue
- 1
- Pages
- 42233-42233
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2592034847
- Cited by
- 471
- References
- 25
- FWCI
- 18.24
- Type
- journal article
- Language
- en
- Open access
- gold
- Licence
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.