X-Ray absorption spectroscopic and electrochemical analyses of Pt–Cu–Fe ternary alloy electrocatalysts supported on carbon
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Carbon-supported Pt–Cu–Fe ternary alloy electrocatalysts have been prepared with two atomic compositions of Pt:Cu:Fe=6:1:1 (denoted as Pt6CuFe/C) and 2:1:1 (denoted as Pt2CuFe/C). The metal alloy structures are investigated by means of powder X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS) at the Pt LIII-edge. Powder XRD analysis shows that alloy particles in the Pt6CuFe/C catalyst form a face-centred cubic structure (AuCu3 type), while those in Pt2CuFe/C catalyst form a face-centred tetragonal structure (AuCu type). EXAFS analyses of the first-neighbour coordination at the Pt LIII-edge for both catalysts show the contraction of Pt–Pt bond distances compared to bulk Pt metal, and also that the ratio of the coordination numbers for Pt and Cu/Fe atoms are statistically consistent with the catalyst composition. Some alloy catalysts exhibit ca. 50% higher catalytic activity towards the oxygen reduction reaction than Pt-only catalysts. The enhanced catalytic activity may be due to the formation of an ordered alloy. The catalysts which display higher ordering show higher mass activity. Cyclic voltammetry reveals the influence of the adsorptive strength of oxygen molecules on the kinetics of oxygen reduction. Unexpectedly, as the adsorptive strength becomes weaker, the specific activity of the alloy catalysts continuously increases, while the mass activity shows a maximum value.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mukerjee, S., Srinivasan, S., Soriaga, M. P., & McBreen, J. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100013a032 · Cited by 439
Importance of Interatomic Spacing in Catalytic Reduction of Oxygen in Phosphoric Acid
Jalan, V., & Taylor, E. J. (1983) · Journal of The Electrochemical Society · doi:10.1149/1.2119574 · Cited by 363
Cited by
Particle size and alloying effects of Pt-based alloy catalysts for fuel cell applications
Min, M.-K., Cho, J., Cho, K., & Kim, H. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00553-3 · Cited by 544
Self-citationX-ray Absorption Spectroscopy of Low Temperature Fuel Cell Catalysts
Russell, A. E., & Rose, A. (2004) · Chemical Reviews · doi:10.1021/cr020708r · Cited by 303
Xiong, L., & Manthiram, A. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1862256 · Cited by 238
Antolini, E. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.05.081 · Cited by 210
Platinum-based ternary catalysts for low temperature fuel cells
Antolini, E. (2007) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2007.03.001 · Cited by 197
Platinum-based ternary catalysts for low temperature fuel cells
Antolini, E. (2007) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2007.03.002 · Cited by 158
Xiong, L., & Manthiram, A. (2004) · J. Mater. Chem. · doi:10.1039/b400968c · Cited by 115
Metadata
- Authors
- Cho, J., Roh, W., Kim, D.-K., Yoon, J.-B., Choy, J.-H., & Kim, H.
- Venue
- Journal of the Chemical Society, Faraday Transactions
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 1998
- Volume
- 94
- Issue
- 18
- Pages
- 2835-2841
- ISSN
- 0956-5000 (ISSN-L)
- 1364-5455
- OpenAlex
- W2155953470
- Cited by
- 28
- References
- 2
- FWCI
- 2.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.