The DOI matches its Crossref record.
Preparation and characterization of ZnS–polymer nanocomposite films with high refractive index
Abstract
Novel ZnS–poly(urethane-methacrylate macromer) (PUMM) nanocomposite films with high refractive index were prepared by incorporating thiophenol (PhSH)–4-thiomethyl styrene (TMSt)-capped ZnS nanoparticles into a urethane-methacrylate macromer (UMM), followed by spin-coating and ultraviolet radiation initiated free radical polymerization. PhSH–TMSt-capped colloidal ZnS solution was synthesized by reacting zinc acetate with H2S in N,N-dimethylformamide. UMM macromer was synthesized by reacting 2-hydroxyethyl methacrylate (HEMA) with isocyanate group terminated polythiourethane oligomer which was obtained from polyaddition of 2,2′-dimercaptoethyl sulfide (MES) with 2,4-tolylene diisocyanate (TDI). Thiol-capped ZnS nanoparticles were characterized and found to be 2.0–5.0 nm in diameter with a cubic phase structure. The chemical composition of these ZnS nanoparticles was determined to be Zn2+ ∶ S2− ∶ RS− = 1 ∶ 0.6 ∶ 0.6 using chemical analysis methods. The weight fraction of ZnS nanoparticles in the films was measured by TGA, and it accords well with that of theoretical calculation. FTIR and DSC studies show that ZnS nanoparticles were successfully immobilized into the polymer matrix and the resulting nanocomposite films have a good thermal stability. TEM images indicate that the ZnS nanoparticles were uniformly dispersed in the polymer matrix and the particles remained their original size (2–5 nm) before incorporation into the polymer matrix. The XPS depth profiling technique demonstrates that the ZnS nanoparticles were also dispersed homogeneously in the depth scales of the polymer matrix. The nanocomposite films show high optical transparency in the visible region (T > 95% at 550 nm) and high refractive index in the range of 1.645–1.796 at 632.8 nm as the content of thiol-capped ZnS nanoparticles linearly increased from 0 to 86 wt%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Jiang, P., Liu, Q., Liang, Y., Tian, J., Asiri, A. M., & Sun, X. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406848 · Cited by 885
Functional inorganic nanofillers for transparent polymers
Althues, H., Henle, J., & Kaskel, S. (2007) · Chemical Society Reviews · doi:10.1039/b608177k · Cited by 639
High refractive index polymers: fundamental research and practical applications
Liu, J.-G., & Ueda, M. (2009) · Journal of Materials Chemistry · doi:10.1039/b909690f · Cited by 625
High refractive index organic–inorganic nanocomposites: design, synthesis and application
Lü, C., & Yang, B. (2009) · Journal of Materials Chemistry · doi:10.1039/b816254a · Cited by 383
Self-citationTransparent polymer nanocomposites: An overview on their synthesis and advanced properties
Loste, J., Lopez-Cuesta, J.-M., Billon, L., Garay, H., & Save, M. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.003 · Cited by 350
Metadata
- Authors
- Lü, C., Cui, Z., Wang, Y., Li, Z., Guan, C., Yang, B., & Shen, J.
- Venue
- J. Mater. Chem.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2003
- Volume
- 13
- Issue
- 9
- Pages
- 2189-2195
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2163116546
- Cited by
- 181
- References
- 0
- FWCI
- 3.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and characterization of ZnS–polymer nanocomposite films with high refractive index. https://app.cochat.ai/papers/10.1039/b304154a
- The paper
- Lü, C., Cui, Z., Wang, Y., Li, Z., Guan, C., Yang, B., & Shen, J. (2003). Preparation and characterization of ZnS–polymer nanocomposite films with high refractive index. J. Mater. Chem. https://doi.org/10.1039/b304154a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.