The DOI matches its Crossref record.
Synthesis and properties of highly sulfonated proton conducting polyimides from bis(3-sulfopropoxy)benzidine diaminesElectronic supplementary information (ESI) available: 1H NMR spectra of BSPB diamines and IR spectra of resulting polyimide membranes. See http://www.rsc.org/suppdata/jm/b3/b313276e/
Abstract
Two novel sulfonated diamine isomers, 2,2′-bis(3-sulfopropoxy)benzidine (2,2′-BSPB) and 3,3′-bis(3-sulfopropoxy)benzidine (3,3′-BSPB), were successfully synthesized and the highly sulfonated polyimides (SPIs) with sulfonic acid groups in the side chains were prepared from 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA) and BSPB monomers. Transmission electron microscopy (TEM) analysis revealed that these side-chain-type SPI membranes have a microphase-separated structure composed of hydrophilic side chain domains and hydrophobic polyimide main chain domains. They showed high proton conductivities similar to or higher than those of Nafion 117 in the high relative humidity range (>70% RH). The proton conducting behavior was analyzed by percolation theory. Despite their high ion exchange capacity (IEC = 2.89 meq. g−1) and high water uptakes, they displayed much better water stability than common sulfonated polyimides with the sulfonic acid groups directly bonded to the polymer backbone. This is probably due to the microphase-separated structure of the membrane and the strong basicity of BSPB diamine moieties resulting from the electron donating effect of the propoxy groups. The sulfopropoxy groups were stable against aging in acidic aqueous solution at 373 K. Both the polyimide membranes showed good mechanical strength under high moisture conditions (about 6 GPa at 90% RH) and displayed anisotropic membrane swelling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Designing the next generation of proton-exchange membrane fuel cells
Jiao, K., Xuan, J., Du, Q., Bao, Z., Xie, B., Wang, B., Zhao, Y., Fan, L., Wang, H., Hou, Z., et al. (2021) · Nature · doi:10.1038/s41586-021-03482-7 · Cited by 2,947
Self-citationAdvanced polyimide materials: Syntheses, physical properties and applications
Liaw, D.-J., Wang, K.-L., Huang, Y.-C., Lee, K.-R., Lai, J.-Y., & Ha, C.-S. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.02.005 · Cited by 2,187
Review of Advanced Materials for Proton Exchange Membrane Fuel Cells
Kraytsberg, A., & Ein-Eli, Y. (2014) · Energy & Fuels · doi:10.1021/ef501977k · Cited by 705
Park, C. H., Lee, C. H., Guiver, M. D., & Lee, Y. M. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.001 · Cited by 682
Aliphatic/Aromatic Polyimide Ionomers as a Proton Conductive Membrane for Fuel Cell Applications
Asano, N., Aoki, M., Suzuki, S., Miyatake, K., Uchida, H., & Watanabe, M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0571491 · Cited by 657
Metadata
- Authors
- Yin, Y., Fang, J., Watari, T., Tanaka, K., Kita, H., & Okamoto, K.-I.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2004
- Volume
- 14
- Issue
- 6
- Pages
- 1062
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1893980890
- Cited by
- 209
- References
- 0
- FWCI
- 17.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis and properties of highly sulfonated proton conducting polyimides from bis(3-sulfopropoxy)benzidine diaminesElectronic supplementary information (ESI) available: 1H NMR spectra of BSPB diamines and IR spectra of resulting polyimide membranes. See http://www.rsc.org/suppdata/jm/b3/b313276e/. https://app.cochat.ai/papers/10.1039/b313276e
- The paper
- Yin, Y., Fang, J., Watari, T., Tanaka, K., Kita, H., & Okamoto, K.-I. (2004). Synthesis and properties of highly sulfonated proton conducting polyimides from bis(3-sulfopropoxy)benzidine diaminesElectronic supplementary information (ESI) available: 1H NMR spectra of BSPB diamines and IR spectra of resulting polyimide membranes. See http://www.rsc.org/suppdata/jm/b3/b313276e/. Journal of Materials Chemistry. https://doi.org/10.1039/b313276e
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.