CoChat

Influence of atomic ordering on the electrocatalytic activity of Pt–Co alloys in alkaline electrolyte and proton exchange membrane fuel cells

Xiong, Liufeng, Manthiram, Arumugam · 2004 · J. Mater. Chem.

The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.

Abstract

Carbon-supported Pt–Co alloy catalysts with Co contents of 10–50 wt% have been synthesized by reducing aqueous Co2+ ions with borohydride or precipitating as hydroxide in the presence of a commercially available carbon-supported Pt catalyst followed by heat treatment in a 90% Ar–10% H2 mixture at 900 °C for 1 h. X-Ray diffraction indicates the Pt–Co alloys thus obtained to have the ordered Pt3Co or PtCo type structures or the disordered Pt type structure depending on the Co content. High resolution transmission electron microscopy (HRTEM) studies also confirm the formation of ordered structures. Structural analysis of the products after annealing at various temperatures 500 ≤ T ≤ 900 °C for 1 h suggests the ordering to be maximized for an annealing temperature of around 650 °C. Evaluation of the Pt–Co/C alloy catalysts for oxygen reduction in half cells employing KOH as the electrolyte and in proton exchange membrane fuel cells indicates that the alloys with the ordered Pt3Co or PtCo type structures have higher catalytic activity with lower polarization losses and higher power densities than Pt or disordered Pt–Co alloys. With the ordered phases, the activity increases with the extent of ordering. The enhanced catalytic activity is explained based on optimal structural and electronic features consisting of optimum number of Pt and Co nearest neighbors, Pt–Pt distance, and d-electron density in Pt.

Overview

Integrity signals

Registry

Crossref · 10.1039/b400968c

Cites

33 of 33 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 33 references

Research works printed but not linked: 2

  1. Cote, 1998, J. New Mater. Electrochem. Systems, 1, 7
  2. Dickinson, 2002, Electrochim. Acta, 00, 1

Cited by

See all 117

Metadata

Authors
Xiong, L., & Manthiram, A.
Affiliations
The University of Texas at Austin (US)
Corresponding author
Manthiram, Arumugam
Venue
J. Mater. Chem.
Published
2004
Volume
14
Issue
9
Pages
1454-1460
ISSN
  • 0959-9428 (ISSN-L)
  • 1364-5501
OpenAlex
W2069023230
Cited by
115
References
33
Citations by year
2026: 1 · 2025: 3 · 2024: 1 · 2023: 2 · 2022: 1 · 2021: 2 · 2020: 5 · 2019: 1 · 2018: 4 · 2017: 5 · 2016: 4 · 2015: 8 · 2014: 6 · 2013: 5 · 2012: 10
FWCI
4.17
Type
journal article
Language
en
Open access
closed
Locations
Journal of Materials Chemistry (publishedVersion)
Funders
Welch Foundation
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
Keywords
Pt-Co alloy, atomic ordering, Pt3Co, PtCo, oxygen reduction reaction, electrocatalysts, proton exchange membrane fuel cells, alkaline electrolyte, carbon-supported catalysts, annealing temperature, borohydride reduction, hydrogen annealing, polarization loss

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.