The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Sol–gel coatings for corrosion protection of metals
Abstract
Sol–gel derived films exhibit a high potential as substitutes for the environmentally unfriendly chromate metal-surface pre-treatment methods. Inorganic sol–gel derived films offer good adhesion between metals and organic paint. However, they cannot provide adequate corrosion protection due to their high crack-forming potential. Introduction of an organic component to an inorganic sol–gel system leads to the formation of thicker, more flexible and functionalized films with enhanced compatibility to different organic top coatings. Incorporation of nanoparticles in the hybrid sol–gel systems increases the corrosion protection properties due to lower porosity and lower cracking potential along with enhancement of the mechanical properties. Furthermore, the incorporation of inorganic nanoparticles can be a way to insert corrosion inhibitors, preparing inhibitor nanoreservoirs for “self-repairing” pre-treatments with controlled release properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hench, L. L., & West, J. K. (1990) · Chemical Reviews · doi:10.1021/cr00099a003 · Cited by 4,450
Sol-gel chemistry of transition metal oxides
Livage, J., Henry, M., & Sanchez, C. (1988) · Progress in Solid State Chemistry · doi:10.1016/0079-6786(88)90005-2 · Cited by 2,323
Hybrid Nanocomposite Materials—between inorganic glasses and organic polymers
Novak, B. M. (1993) · Advanced Materials · doi:10.1002/adma.19930050603 · Cited by 1,445
Amphiphilic Block Copolymers in Structure-Controlled Nanomaterial Hybrids
Förster, S., & Antonietti, M. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199802)10:3<195::aid-adma195>3.0.co;2-v · Cited by 1,245
Designed Hybrid Organic−Inorganic Nanocomposites from Functional Nanobuilding Blocks
Sanchez, C., Soler-Illia, G. J. D. A. A., Ribot, F., Lalot, T., Mayer, C. R., & Cabuil, V. (2001) · Chemistry of Materials · doi:10.1021/cm011061e · Cited by 1,240
Hybrid organic–inorganic materials: a land of multidisciplinarity
Judeinstein, P., & Sanchez, C. (1996) · J. Mater. Chem. · doi:10.1039/jm9960600511 · Cited by 1,168
Bridged Polysilsesquioxanes. Highly Porous Hybrid Organic-Inorganic Materials
Loy, D. A., & Shea, K. J. (1995) · Chemical Reviews · doi:10.1021/cr00037a013 · Cited by 994
Design of hybrid organic-inorganic materials synthesized via sol-gel chemistry
Sánchez, C., & Ribot, F. O. (1994) · HAL · Cited by 984
Hybrid Inorganic-Organic Materials by Sol-Gel Processing of Organofunctional Metal Alkoxides
Schubert, U., Huesing, N., & Lorenz, A. (1995) · Chemistry of Materials · doi:10.1021/cm00059a007 · Cited by 888
Optical Properties of Functional Hybrid Organic–Inorganic Nanocomposites
Sanchez, C., Lebeau, B., Chaput, F., & Boilot, J. ‐. (2003) · Advanced Materials · doi:10.1002/adma.200300389 · Cited by 886
Cited by
Perovskite synthesis, properties and their related biochemical and industrial application
Assirey, E. A. R. (2019) · Saudi Pharmaceutical Journal · doi:10.1016/j.jsps.2019.05.003 · Cited by 445
Potential use of smart coatings for corrosion protection of metals and alloys: A review
Nazeer, A. A., & Madkour, M. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.01.027 · Cited by 339
Metadata
- Authors
- Zheludkevich, M. L., Salvado, I. M., & Ferreira, M. G. S.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2005
- Volume
- 15
- Issue
- 48
- Pages
- 5099
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1994653296
- Cited by
- 527
- References
- 26
- FWCI
- 4.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sol–gel coatings for corrosion protection of metals. https://app.cochat.ai/papers/10.1039/b419153f
- The paper
- Zheludkevich, M. L., Salvado, I. M., & Ferreira, M. G. S. (2005). Sol–gel coatings for corrosion protection of metals. Journal of Materials Chemistry. https://doi.org/10.1039/b419153f
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
