Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 250

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Catalytic dehydration of glycerol in sub- and supercritical water: a new chemical process for acrolein production

Ott, L., Bicker, M., Vogel, H.·2006·Green Chem.

Abstract

Investigations on using renewables as alternative raw materials for intermediates are becoming more and more important as the crude oil and natural gas resources will be exhausted in a few decades. Acrolein is an important and versatile intermediate for the chemical industry, e.g. for the production of acrylic acid esters, superabsorber polymers or detergents. Up to now, the production route is the gas phase oxidation of propylene with a Bi/Mo-mixed oxide catalyst. As an alternative, acrolein can be produced by the dehydration of glycerol, which appears as a basic component of natural fats and is accumulated to a great extent as a by-product during fat saponification and biodiesel production. Here, the usage of sub- and supercritical water as the reaction media has shown a certain potential for the dehydration of glycerol, although the conversion and acrolein selectivities which have been achieved so far, are not satisfying for an economical process. Only the addition of mineral acid leads to sufficient acrolein yields. To evade the disadvantage of intensifying corrosion, the influence of the addition of electrolytes such as zinc sulfate on this reaction has been investigated. Experiments were conducted in a high pressure plug flow reactor from 300–390 °C, 25–34 MPa, 10–60 s residence time and varying amounts of zinc sulfate. It was shown that in the near subcritical temperature, increasing the amount of salt enhances the glycerol conversion. The maximum acrolein selectivity is 75 mol% at 360 °C, 25 MPa, 470 ppm (g g−1) zinc sulfate and a conversion of 50%. The activation volume was determined to be −(274 ± 65) cm3 mol−1 (at 360 °C, 25–34 MPa and 790 ppm (g g−1) zinc sulfate) and it turned out that the addition of zinc sulfate causes a decrease of the activation energy from 150 kJ mol−1 to (140 ± 12) kJ mol−1.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1039/b506285c

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 250

Metadata

Authors
Ott, L., Bicker, M., & Vogel, H.
Venue
Green Chem.
Published
2006
Volume
8
Issue
2
Pages
214-220
ISSN
  • 1463-9262 (ISSN-L)
  • 1463-9270
OpenAlex
W2047513056
Cited by
250
References
2
FWCI
9.64
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.