The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Desilication: on the controlled generation of mesoporosity in MFI zeolites
Abstract
Recent studies have shown that desilication by treatment in alkaline medium is, with respect to other methods, a very suitable and reproducible methodology to obtain mesoporous ZSM-5 zeolites with preserved structural integrity. This feature article analyzes mechanistic and kinetic aspects associated with this post-synthesis treatment. Framework aluminium controls the process of framework silicon extraction and makes desilication selective towards intracrystalline mesopore formation. An optimal molar Si/Al ratio in the range of 25–50 has been identified. At higher Si/Al ratios non-selective and excessive extraction of framework silicon occurs, while minor extraction and limited mesopore formation occurs at lower ratios. The presence of non-framework aluminium species, for example obtained by steam treatment, inhibits mesopore formation by alkaline treatment due to reinsertion of these species into the zeolite framework. Additional kinetic optimization of the physicochemical properties of the hierarchical porous zeolite structures is achieved by variation of time and temperature of the alkaline treatment. A successive combination of post-treatments, in which desilication is followed by dealumination, enables a decoupled modification of the mesoporous and acidic properties, being interesting in catalyst design and optimization. Preliminary work on other zeolite framework types has shown a promising outlook of the alkaline treatment. Development of mesoporous zeolites via desilication should induce a more efficient usage of the zeolite crystal due to an improved accessibility and a facilitated transport to and from the active sites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
State of the art and future challenges of zeolites as catalysts
Corma, A. (2003) · Journal of Catalysis · doi:10.1016/s0021-9517(02)00132-x · Cited by 1,225
Delaminated zeolite precursors as selective acidic catalysts
Corma, A., Fornes, V., Pergher, S. B., Maesen, T. L. M., & Buglass, J. G. (1998) · Nature · doi:10.1038/24592 · Cited by 909
Groen, J. C., Peffer, L. A. A., Moulijn, J. A., & Pérez‐Ramírez, J. (2005) · Chemistry – A European Journal · doi:10.1002/chem.200500045 · Cited by 553
Self-citationA large-cavity zeolite with wide pore windows and potential as an oil refining catalyst
Corma, A., Díaz-Cabañas, M. J., Martínez-Triguero, J., Rey, F., & Rius, J. (2002) · Nature · doi:10.1038/nature00924 · Cited by 551
Optimal Aluminum-Assisted Mesoporosity Development in MFI Zeolites by Desilication
Groen, J. C., Jansen, J. C., Moulijn, J. A., & Pérez-Ramírez, J. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047194f · Cited by 540
Self-citationHierarchical Zeolites: A Proven Strategy to Combine Shape Selectivity with Efficient Mass Transport
Hartmann, M. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200460644 · Cited by 518
Creation of Hollow Zeolite Architectures by Controlled Desilication of Al-Zoned ZSM-5 Crystals
Groen, J. C., Bach, T., Ziese, U., Paulaime-van Donk, A. M., de Jong, K. P., Moulijn, J. A., & Pérez-Ramírez, J. (2005) · Journal of the American Chemical Society · doi:10.1021/ja052592x · Cited by 515
Self-citationZSM-5 Monolith of Uniform Mesoporous Channels
Tao, Y., Kanoh, H., & Kaneko, K. (2003) · Journal of the American Chemical Society · doi:10.1021/ja0299405 · Cited by 498
Ogura, M., Shinomiya, S.-Y., Tateno, J., Nara, Y., Nomura, M., Kikuchi, E., & Matsukata, M. (2001) · Applied Catalysis A: General · doi:10.1016/s0926-860x(01)00645-7 · Cited by 468
Characterization of nanocrystalline zeolite Beta
Camblor, M. A., Corma, A., & Valencia, S. (1998) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(98)00172-3 · Cited by 456
Groen, J. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.01.002 · Cited by 387
Self-citationChristensen, C. H., Johannsen, K., Schmidt, I., & Christensen, C. H. (2003) · Journal of the American Chemical Society · doi:10.1021/ja037063c · Cited by 347
Mesoporosity development in ZSM-5 zeolite upon optimized desilication conditions in alkaline medium
Groen, J. C., Peffer, L. A. A., Moulijn, J. A., & Pérez-Ramı́rez, J. (2004) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.04.012 · Cited by 330
Self-citationJanssen, A. H., Koster, A. J., & de Jong, K. P. (2001) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20010316)40:6<1102::aid-anie11020>3.0.co;2-6 · Cited by 314
Formation of Uniform Mesopores in ZSM-5 Zeolite through Treatment in Alkaline Solution
Ogura, M., Shinomiya, S.-Y., Tateno, J., Nara, Y., Kikuchi, E., & Matsukata, M. (2000) · Chemistry Letters · doi:10.1246/cl.2000.882 · Cited by 291
Exploratory study of mesopore templating with carbon during zeolite synthesis
Janssen, A. H., Schmidt, I., Jacobsen, C. J. H., Koster, A. J., & de Jong, K. P. (2003) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2003.07.003 · Cited by 282
Zoned aluminium distribution in synthetic zeolite ZSM-5
von Ballmoos, R., & Meier, W. M. (1981) · Nature · doi:10.1038/289782a0 · Cited by 259
Groen, J. C., Moulijn, J. A., & Pérez-Ramírez, J. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.07.050 · Cited by 252
Self-citationCorma, A., Díaz-Cabañas, M. J., Rey, F., Nicolopoulus, S., & Boulahya, K. (2004) · Chem. Commun. · doi:10.1039/b406572g · Cited by 251
Kortunov, P., Vasenkov, S., Kärger, J., Valiullin, R., Gottschalk, P., Fé Elía, M., Perez, M., Stöcker, M., Drescher, B., McElhiney, G., et al. (2005) · Journal of the American Chemical Society · doi:10.1021/ja053134r · Cited by 232
Su, L., Liu, L., Zhuang, J., Wang, H., Li, Y., Shen, W., Xu, Y., & Bao, X. (2003) · Catalysis Letters · doi:10.1023/b:catl.0000007149.48132.5a · Cited by 227
Critical appraisal of mesopore characterization by adsorption analysis
Groen, J. C., & Pérez-Ramı́rez, J. (2004) · Applied Catalysis A: General · doi:10.1016/j.apcata.2004.03.031 · Cited by 223
Self-citationAluminum zoning in ZSM-5 as revealed by selective silica removal
Dessau, R. M., Valyocsik, E. W., & Goeke, N. H. (1992) · Zeolites · doi:10.1016/0144-2449(92)90049-u · Cited by 183
Low temperature synthesis and properties of ZSM-5 aggregates formed by ultra-small nanocrystals
Aguado, J., Serrano, D. P., Escola, J. M., & Rodríguez, J. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.06.027 · Cited by 172
Catalytic cracking of n-octane over alkali-treated MFI zeolites
Jung, J. S., Park, J. W., & Seo, G. (2005) · Applied Catalysis A: General · doi:10.1016/j.apcata.2005.04.047 · Cited by 166
Delamination of Ti-MWW and High Efficiency in Epoxidation of Alkenes with Various Molecular Sizes
Wu, P., Tungasmita, D. N., Ruan, J., Liu, Y., He, M., Fan, W., Terasaki, O., & Tatsumi, T. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp037459a · Cited by 148
Comparison of nitric and oxalic acid in the dealumination of mordenite
Giudici, R., Kouwenhoven, H. W., & Prins, R. (2000) · Applied Catalysis A General · doi:10.1016/s0926-860x(00)00470-1 · Cited by 136
Čimek, A., Subotić, B., Šmit, I., Tonejc, A., Aiello, R., Crea, F., & Nastro, A. (1997) · Microporous Materials · doi:10.1016/s0927-6513(96)00082-x · Cited by 132
Melián-Cabrera, I. V., Espinosa, S., Groen, J. C., VDLINDEN, B., Kapteijn, F., & Moulijn, J. A. (2006) · Journal of Catalysis · doi:10.1016/j.jcat.2005.11.034 · Cited by 121
Self-citationControlling the spatial distribution of aluminum in ZSM-5 crystals
Althoff, R., Schulz-Dobrick, B., Schüth, F., & Unger, K. (1993) · Microporous Materials · doi:10.1016/0927-6513(93)80079-a · Cited by 87
Modifications of ZSM-5 zeolites and their applications in catalytic degradation of LDPE
Zhou, Q., Wang, Y., Tang, C., & Zhang, Y. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00378-6 · Cited by 54
(2000) · doi:10.1002/(sici)1521-3773(20000417)39:8<1499::aid-anie1499>3.0.co;2-0
Cited by
Pérez-Ramírez, J., Christensen, C. H., Egeblad, K., Christensen, C. H., & Groen, J. C. (2008) · Chemical Society Reviews · doi:10.1039/b809030k · Cited by 1,836
Self-citationHierarchically porous materials: synthesis strategies and structure design
Yang, X.-Y., Chen, L.-H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B.-L. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00829a · Cited by 1,439
Hierarchically Structured Zeolites: From Design to Application
Chen, L.-H., Sun, M.-H., Wang, Z., Yang, W., Xie, Z., & Su, B.-L. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00016 · Cited by 724
Design of hierarchical zeolite catalysts by desilication
Verboekend, D., & Pérez-Ramírez, J. (2011) · Catalysis Science & Technology · doi:10.1039/c1cy00150g · Cited by 712
Self-citationGroen, J. C., Zhu, W., Brouwer, S., Huynink, S. J., Kapteijn, F., Moulijn, J. A., & Pérez-Ramírez, J. (2007) · Journal of the American Chemical Society · doi:10.1021/ja065737o · Cited by 711
Self-citation
Metadata
- Authors
- Groen, J. C., Moulijn, J. A., & Pérez-Ramírez, J.
- Venue
- J. Mater. Chem.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2006
- Volume
- 16
- Issue
- 22
- Pages
- 2121-2131
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1968648226
- Cited by
- 587
- References
- 33
- FWCI
- 12.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.