Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 239

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Can superhydrophobic surfaces repel hot water?

Liu, Yuyang, Chen, Xianqiong, Xin, J. H. · 2009 · Journal of Materials Chemistry

Abstract

Superhydrophobic surfaces that can repel hot liquids stand for a new generation of self-cleaning surfaces with broad applications. However, can current existing superhydrophobic surfaces repel hot water? In this paper, the repellent characteristics of current existing superhydrophobic surfaces to hot water (50–80 °C) were investigated. Representative superhydrophobic surfaces from lotus leaves, Teflon, silica–fluoropolymer composites and sol–gel processes were fabricated on silicon wafers and their repellency to hot water was evaluated based on water-contact angle (WCA) measurements and water uptake. These so-called superhydrophobic surfaces, which usually exhibit high repellency to cool water (around 25 °C), however, show remarkably decreased repellency to hot water. This may be attributed to a decrease of surface tension when the temperature of water increases and the lower surface tension of hot water makes it a better “wetting agent” to get into the pores and fissures of rough surfaces rather than bridging them with surface tension. According to the theories of surface wettability, the wetting state of water droplets on superhydrophobic surfaces can be described as Cassie–Baxter and Wenzel states, respectively. Superhydrophobic surfaces lose their high repellency to hot water due to the transition of the wetting state from Cassie–Baxter state to Wenzel state. Surface roughness, which is usually used for improving surface hydrophobicity, however, is found to improve the wettability of a solid surface to hot water. The results in this paper also show that the wettability of a solid surface is governed by both the surface roughness and surface free energy, but the surface energy is more prevailing than the surface roughness in making the surface repel hot liquids. To fabricate hot water repellent fabrics, a nanocomposite of CNTs and Teflon was prepared and applied to commercial fabrics to produce scalding protection clothes. The repellency of the CNTs–Teflon treated fabrics to hot beverages (water, milk, coffee and tea, 50–80 °C) was studied. The spray test shows that although some superhydrophobic surfaces exhibit high repellency to static water they show reduced repellency to dynamic water.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1039/b822168e

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 239

Metadata

Authors
Liu, Y., Chen, X., & Xin, J. H.
Venue
Journal of Materials Chemistry
Published
2009
Volume
19
Issue
31
Pages
5602
ISSN
  • 0959-9428 (ISSN-L)
  • 1364-5501
OpenAlex
W1984708817
Cited by
239
References
1
FWCI
4.17
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.