The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Resonance shear measurement of nanoconfined ionic liquids
Abstract
Two types of imidazolium-based ionic liquid (IL), 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([C(4)mim][NTF(2)]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([C(4)mim][BF(4)]), confined between silica surfaces were investigated by surface force apparatus (SFA)-based resonance shear measurements together with surface force measurements. The surface force profiles in the ILs showed oscillatory solvation forces below the characteristic surface separations: 10.0 nm for [C(4)mim][NTf(2)] and 6.9 nm for [C(4)mim][BF(4)]. The more pronounced solvation force found in [C(4)mim][NTf(2)] suggests that the crystal-forming ability of the IL contributes to the stronger layering of the ILs adjacent to the surface. The resonance shear measurement and the physical model analysis revealed that the viscosities of the confined ILs were 1-3 orders of magnitude higher than that of the bulk IL. This paper also focused on the correlation between the resonance shear behaviour and the lubrication property of the ILs, and the suspension rheology in the ILs. An understanding of the solid-IL interface and of ILs confined in nanospace will facilitate the further development of novel applications employing ILs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sakuma, H., Otsuki, K., & Kurihara, K. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.046104 · Cited by 141
Self-citation
Cited by
Structure and Nanostructure in Ionic Liquids
Hayes, R., Warr, G. G., & Atkin, R. (2015) · Chemical Reviews · doi:10.1021/cr500411q · Cited by 2,293
Ionogels, ionic liquid based hybrid materials
Le Bideau, J., Viau, L., & Vioux, A. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00059k · Cited by 1,285
Zhang, S., Zhang, J., Zhang, Y., & Deng, Y. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00509 · Cited by 659
A Review of Ionic Liquid Lubricants
Somers, A., Howlett, P., MacFarlane, D., & Forsyth, M. (2013) · Lubricants · doi:10.3390/lubricants1010003 · Cited by 605
Ionic liquid lubricants: when chemistry meets tribology
Cai, M., Yu, Q., Liu, W., & Zhou, F. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00126k · Cited by 476
Metadata
- Authors
- Ueno, K., Kasuya, M., Watanabe, M., Mizukami, M., & Kurihara, K.
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 12
- Issue
- 16
- Pages
- 4066
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W1990805768
- Cited by
- 201
- References
- 1
- FWCI
- 4.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.