The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Removal efficiency of arsenate and phosphate from aqueous solution using layered double hydroxide materials: intercalation vs. precipitation
Abstract
Adsorption behaviours of arsenate and phosphate over Mg-based and Ca-based layered double hydroxide (LDH) adsorbents have been examined in kinetics and thermodynamics. Removal of these anions from aqueous solution follows the Lagergren first-order and/or pseudo-second-order model, and the adsorption isotherm is well fitted with either the Langmuir or the Freundlich model. Structure analysis of used LDH adsorbents reveals that two processes, i.e. intercalation and precipitation, are responsible for the anion removal. Adsorption over the Mg-based LDH adsorbent occurs by way of intercalation into the interlayer spacing while that over the Ca-based adsorbent occurs by means of precipitation of dissolved Ca2+ with the anion. More particularly, we have found that As(V) at a concentration below 10 mg/L can be very efficiently removed through intercalation into the interlayer of reconstructed MgAl-LDHs, with less than 0.010 mg/L of As left in solution. We have also noted that phosphate at [P] up to 100 mg/L can be quickly and effectively removed through precipitation with CaAl-Cl-LDH, giving rise to ∼0.1 mg/L of P left in solution with the maximum adsorption amount up to 135 mg/g. Therefore, these two LDH materials (calcined Mg3Al-CO3-LDH and uncalcined Ca2Al-Cl-LDH) are potential cost-effective adsorbents for arsenate and phosphate, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
YOSHIDA, T. (2004) · Toxicology and Applied Pharmacology · doi:10.1016/j.taap.2003.10.022 · Cited by 582
Cited by
Removal and Recovery of Phosphate From Water Using Sorption
Loganathan, P., Vigneswaran, S., Kandasamy, J., & Bolan, N. S. (2014) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2012.741311 · Cited by 678
Performance and prospects of different adsorbents for phosphorus uptake and recovery from water
Bacelo, H., Pintor, A. M. A., Santos, S. C. R., Boaventura, R. A. R., & Botelho, C. M. S. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122566 · Cited by 620
Zubair, M., Daud, M., McKay, G., Shehzad, F., & Al-Harthi, M. A. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.04.002 · Cited by 518
Layered Double Hydroxide‐based Nanomaterials as Highly Efficient Catalysts and Adsorbents
Li, C., Wei, M., Evans, D. G., & Duan, X. (2014) · Small · doi:10.1002/smll.201401464 · Cited by 451
Hierarchical layered double hydroxide nanocomposites: structure, synthesis and applications
Gu, Z., Atherton, J. J., & Xu, Z. P. (2015) · Chemical Communications · doi:10.1039/c4cc07715f · Cited by 389
Self-citation
Metadata
- Authors
- Xu, Y., Dai, Y., Zhou, J., Xu, Z. P., Qian, G., & Lu, G. Q. M.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 20
- Issue
- 22
- Pages
- 4684
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1987051105
- Cited by
- 158
- References
- 1
- FWCI
- 4.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.