The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Core-shell structured poly(methyl methacrylate)/BaTiO3 nanocomposites prepared by in situ atom transfer radical polymerization: a route to high dielectric constant materials with the inherent low loss of the base polymer
Abstract
Core-shell structured BaTiO3/poly(methyl methacrylate) (PMMA) nanocomposites were successfully prepared by in situ atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) from the surface of BaTiO3 nanoparticles. A broadband dielectric spectrometer was used to investigate the temperature dependence of the dielectric properties of the nanocomposites in a frequency range from 0.1 Hz to 1 MHz. It was found that the nanocomposites not only showed a significantly increased dielectric constant when compared with pure PMMA, but also showed the inherent low loss of the base polymer in a wide range of frequencies. Only in the very low frequency/high temperature range, can a higher dielectric loss can be observed in the nanocomposites. It was also found that the effective dielectric constant of the core-shell structured hybrid nanoparticles can be tailored by varying the polymer shell thickness. The dielectric response of beta relaxation of PMMA was also studied and the results showed that the nanoparticles had no influence upon the relaxation activation energy. Fourier-transform infrared spectroscopy (FTIR) and 1H NMR spectra confirmed the chemical structure of the PMMA shell on the surface of the BaTiO3 nanoparticles. Transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) results revealed that the PMMA shell thickness could be well controlled by tuning the feed ratio of MMA to BaTiO3.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The ‘universal’ dielectric response
Jonscher, A. K. (1977) · Nature · doi:10.1038/267673a0 · Cited by 5,618
Barbey, R., Lavanant, L., Paripovic, D., Schüwer, N., Sugnaux, C., Tugulu, S., & Klok, H.-A. (2009) · Chemical Reviews · doi:10.1021/cr900045a · Cited by 1,753
Polymer brushes: surface-immobilized macromolecules
Zhao, B., & Brittain, W. J. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00012-5 · Cited by 1,628
An all-organic composite actuator material with a high dielectric constant
Zhang, Q. M., Li, H., Poh, M., Xia, F., Cheng, Z.-Y., Xu, H., & Huang, C. (2002) · Nature · doi:10.1038/nature01021 · Cited by 1,073
High Energy Density Nanocomposites Based on Surface-Modified BaTiO3 and a Ferroelectric Polymer
Kim, P., Doss, N. M., Tillotson, J. P., Hotchkiss, P. J., Pan, M.-J., Marder, S. R., Li, J., Calame, J. P., & Perry, J. W. (2009) · ACS Nano · doi:10.1021/nn9006412 · Cited by 818
Kong, H., Gao, C., & Yan, D. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0380493 · Cited by 658
Kim, P., Jones, S. C., Hotchkiss, P. J., Haddock, J. N., Kippelen, B., Marder, S. R., & Perry, J. W. (2007) · Advanced Materials · doi:10.1002/adma.200602422 · Cited by 601
Ohno, K., Morinaga, T., Koh, K., Tsujii, Y., & Fukuda, T. (2005) · Macromolecules · doi:10.1021/ma048011q · Cited by 569
Single-layer graphene nanosheets with controlled grafting of polymer chains
Fang, M., Wang, K., Lu, H., Yang, Y., & Nutt, S. (2010) · Journal of Materials Chemistry · doi:10.1039/b919078c · Cited by 464
Graphene oxide modified with PMMA via ATRP as a reinforcement filler
Gonçalves, G., Marques, P. A. A. P., Barros-Timmons, A., Bdkin, I., Singh, M. K., Emami, N., & Grácio, J. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01674h · Cited by 461
Cited by
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
Dang, Z., Yuan, J., Yao, S., & Liao, R. (2013) · Advanced Materials · doi:10.1002/adma.201301752 · Cited by 1,454
Zoppe, J. O., Ataman, N. C., Mocny, P., Wang, J., Moraes, J., & Klok, H.-A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00314 · Cited by 1,046
Core–Shell Structured High‐k Polymer Nanocomposites for Energy Storage and Dielectric Applications
Huang, X., & Jiang, P. (2015) · Advanced Materials · doi:10.1002/adma.201401310 · Cited by 827
Self-citationInterface design for high energy density polymer nanocomposites
Luo, H., Zhou, X., Ellingford, C., Zhang, Y., Chen, S., Zhou, K., Zhang, D., Bowen, C. R., & Wan, C. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00043g · Cited by 799
Polymer-Based Dielectrics with High Energy Storage Density
Chen, Q., Shen, Y., Zhang, S., & Zhang, Q. M. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-021017 · Cited by 642
High-k polymer nanocomposites with 1D filler for dielectric and energy storage applications
Huang, X., Sun, B., Zhu, Y., Li, S., & Jiang, P. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.10.003 · Cited by 550
Self-citationLi, Y., Huang, X., Hu, Z., Jiang, P., Li, S., & Tanaka, T. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am2010459 · Cited by 386
Self-citationZhang, X., Li, B., Dong, L., Liu, H., Chen, W., Shen, Y., & Nan, C. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800096 · Cited by 309
Luo, H., Zhang, D., Jiang, C., Yuan, X., Chen, C., & Zhou, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00555 · Cited by 286
Shi, K., Chai, B., Zou, H., Shen, P., Sun, B., Jiang, P., Shi, Z., & Huang, X. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105515 · Cited by 284
Self-citationPan, Z., Yao, L., Zhai, J., Fu, D., Shen, B., & Wang, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13663 · Cited by 267
A graphite nanoplatelet/epoxy composite with high dielectric constant and high thermal conductivity
Min, C., Yu, D., Cao, J., Wang, G., & Feng, L. (2013) · Carbon · doi:10.1016/j.carbon.2012.12.017 · Cited by 261
Pan, Z., Zhai, J., & Shen, B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03846a · Cited by 258
Metadata
- Authors
- Xie, L., Huang, X., Wu, C., & Jiang, P.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 16
- Pages
- 5897
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2088406034
- Cited by
- 378
- References
- 25
- FWCI
- 12.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.