The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Ultrathin film coatings of aligned cellulose nanocrystals from a convective-shear assembly system and their surface mechanical properties
Abstract
Ultrathin films of aligned cellulose nanocrystals (CNCs) were deposited on solid supports by using convective and shear forces. Compared to previous systems involving high electric or magnetic fields to control the orientation of these rod-like natural nanoparticles, the proposed process of alignment was very simple, inexpensive and with potential for scale up. The effect of concentration of CNC in aqueous suspensions, type of solid support, relative humidity and rates of withdrawal of the deposition plate were determined by using atomic force microscopy (AFM) and ellipsometry. The degree of orientation was quantified from the number density of CNCs in leading angles by using image analyses. Also, the contribution of shear and capillary forces on alignment parallel and normal to the withdrawal direction was elucidated. The best alignment of CNCs in the withdrawal direction, favored by shear effects, was achieved with gold and silica supports with a pre-adsorbed cationic polyelectrolyte layer and at a CNC suspension concentration above 2.5% (w/w), below the critical concentration for chiral nematic phase separation. Compared to the bare solid support, nanoindentation of the obtained coatings of ultrathin films of oriented CNCs provided enhanced surface mechanical strength and wear resistance. A transverse Young's modulus, hardness and coefficient of friction of 8.3 ± 0.9 GPa, 0.38 ± 0.03 GPa and 0.51 ± 0.23 GPa, respectively, were measured. Notably, the transverse Young's modulus was found to be in agreement with reported values predicted by molecular modeling and measured for single CNCs by using atomic force microscopy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Elastic modulus and stress-transfer properties of tunicate cellulose whiskers
Šturcová, A., Davies, G. R., & Eichhorn, S. J. (2005) · Biomacromolecules · doi:10.1021/bm049291k · Cited by 953
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Araki, J., Wada, M., Kuga, S., & Okano, T. (1998) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(98)00404-x · Cited by 769
Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy
Iwamoto, S., Kai, W., Isogai, A., & Iwata, T. (2009) · Biomacromolecules · doi:10.1021/bm900520n · Cited by 754
Cited by
Current characterization methods for cellulose nanomaterials
Foster, E. J., Moon, R. J., Agarwal, U. P., Bortner, M. J., Bras, J., Camarero-Espinosa, S., Chan, K. J., Clift, M. J. D., Cranston, E. D., Eichhorn, S. J., et al. (2018) · Chemical Society Reviews · doi:10.1039/c6cs00895j · Cited by 1,021
Nanocellulose, a tiny fiber with huge applications
Abitbol, T., Rivkin, A., Cao, Y., Nevo, Y., Abraham, E., Ben-Shalom, T., Lapidot, S., & Shoseyov, O. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.01.002 · Cited by 1,006
Cellulose nanocrystals: synthesis, functional properties, and applications
George, J., & S N, S. (2015) · Nanotechnology, Science and Applications · doi:10.2147/nsa.s64386 · Cited by 953
Lin, N., Huang, J., & Dufresne, A. (2012) · Nanoscale · doi:10.1039/c2nr30260h · Cited by 885
Lagerwall, J. P. F., Schütz, C., Salajkova, M., Noh, J., Hyun Park, J., Scalia, G., & Bergström, L. (2014) · NPG Asia Materials · doi:10.1038/am.2013.69 · Cited by 882
Metadata
- Authors
- Hoeger, I., Rojas, O. J., Efimenko, K., Velev, O. D., & Kelley, S. S.
- Venue
- Soft Matter
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 7
- Issue
- 5
- Pages
- 1957
- ISSN
- 1744-683X (ISSN-L)
- 1744-6848
- OpenAlex
- W2160912346
- Cited by
- 171
- References
- 4
- FWCI
- 4.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ultrathin film coatings of aligned cellulose nanocrystals from a convective-shear assembly system and their surface mechanical properties. https://app.cochat.ai/papers/10.1039/c0sm01113d
- The paper
- Hoeger, I., Rojas, O. J., Efimenko, K., Velev, O. D., & Kelley, S. S. (2011). Ultrathin film coatings of aligned cellulose nanocrystals from a convective-shear assembly system and their surface mechanical properties. Soft Matter. https://doi.org/10.1039/c0sm01113d
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.