The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Fe3O4 nanoparticle-integrated graphene sheets for high-performance half and full lithium ion cells
Abstract
We synthesized Fe(3)O(4) nanoparticle/reduced graphene oxide (RGO-Fe(3)O(4)) nanocomposites and evaluated their performance as anodes in both half and full coin cells. The nanocomposites were synthesized through a chemical co-precipitation of Fe(2+) and Fe(3+) in the presence of graphene oxides within an alkaline solution and a subsequent high-temperature reduction reaction in argon (Ar) environment. The morphology and microstructures of the fabricated RGO-Fe(3)O(4) nanocomposites were characterized using various techniques. The results indicated that the Fe(3)O(4) nanoparticles had relatively homogeneous dispersions on the RGO sheet surfaces. These as-synthesized RGO-Fe(3)O(4) nanocomposites were used as anodes for both half and full lithium-ion cells. Electrochemical measurement results exhibit a high reversible capacity which is about two and a half times higher than that of graphite-based anodes at a 0.05C rate, and an enhanced reversible capacity of about 200 mAh g(-1) even at a high charge/discharge rate of 10C (9260 mA g(-1)) in half cells. Most important of all, these fabricated novel nanostructures also show exceptional capacity retention with the assembled RGO-Fe(3)O(4)/LiNi(1/3)Mn(1/3)Co(1/3)O(2) full cell at different C rates. This outstanding electrochemical behavior can be attributed to the unique microstructure, morphology, texture, surface properties of the nanocomposites, and combinative effects from the different chemical composition in the nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mn3O4−Graphene Hybrid as a High-Capacity Anode Material for Lithium Ion Batteries
Wang, H., Cui, L.-F., Yang, Y., Sanchez Casalongue, H., Robinson, J. T., Liang, Y., Cui, Y., & Dai, H. (2010) · Journal of the American Chemical Society · doi:10.1021/ja105296a · Cited by 1,948
Graphene-based nanomaterials and their electrochemistry
Pumera, M. (2010) · Chemical Society Reviews · doi:10.1039/c002690p · Cited by 1,117
Cited by
Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries
Ji, L., Lin, Z., Alcoutlabi, M., & Zhang, X. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00699h · Cited by 2,240
Self-citationGraphene/metal oxide composite electrode materials for energy storage
Wu, Z.-S., Zhou, G., Yin, L.-C., Ren, W., Li, F., & Cheng, H.-M. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.11.001 · Cited by 1,836
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Self-citationHuang, X., Zeng, Z., Fan, Z., Liu, J., & Zhang, H. (2012) · Advanced Materials · doi:10.1002/adma.201201587 · Cited by 923
Advances and challenges for flexible energy storage and conversion devices and systems
Li, L., Wu, Z., Yuan, S., & Zhang, X.-B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00318g · Cited by 895
Metadata
- Authors
- Ji, L., Tan, Z., Kuykendall, T. R., Aloni, S., Xun, S., Lin, E., Battaglia, V., & Zhang, Y.
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 13
- Issue
- 15
- Pages
- 7170
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2066822526
- Cited by
- 245
- References
- 2
- FWCI
- 28.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.