Imidazolium functionalized polysulfone anion exchange membrane for fuel cell application
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Alkaline anion exchange membrane (AEM) is the key material for anion exchange membrane fuel cells (AEMFC), which can potentially outperform proton exchange membrane fuel cells due to facile oxygen reduction kinetics and wide catalyst choices. Quaternary ammonium (QA) AEMs have been shown to be low in alkaline stability, and their fabrication often involves carcinogenic chemicals. Therefore, recent years have witnessed emerging research efforts in developing non-QA AEMs. As part of these efforts, this work reports imidazolium AEMs that were fabricated via functionalization of chloromethylated polysulfone with methylimidazole. The membrane exhibited ion exchange capacity, conductivity and thermal stability that are comparable or superior to those of conventional membranes. A H2/O2fuel cell using the synthesized membrane yielded a peak power density of 16 mW cm−2. Although this result is not high and the membrane stability is still an issue, the potential of using imidazolium AEM in a fuel cell is seen. This work opens up a new route for non-QA AEM design and fabrication. Based on the chemistry involved, it is anticipated that different chloro- or bromomethylated aromatic polymers and imidazole derivatives may be used to optimize membrane conductivity and stability, thus offering the possibility to fabricate high performance AEM.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts
Lu, S., Pan, J., Huang, A., Zhuang, L., & Lu, J. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0810041106 · Cited by 748
A Soluble and Highly Conductive Ionomer for High‐Performance Hydroxide Exchange Membrane Fuel Cells
Gu, S., Cai, R., Luo, T., Chen, Z., Sun, M., Liu, Y., He, G., & Yan, Y. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200806299 · Cited by 605
High‐Performance Alkaline Polymer Electrolyte for Fuel Cell Applications
Pan, J., Lu, S., Li, Y., Huang, A., Zhuang, L., & Lu, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901314 · Cited by 472
Tunable High Performance Cross-Linked Alkaline Anion Exchange Membranes for Fuel Cell Applications
Robertson, N. J., Kostalik, H. A., Clark, T. J., Mutolo, P. F., Abruña, H. D., & Coates, G. W. (2010) · Journal of the American Chemical Society · doi:10.1021/ja908638d · Cited by 464
Hibbs, M. R., Fujimoto, C. H., & Cornelius, C. J. (2009) · Macromolecules · doi:10.1021/ma901538c · Cited by 451
Wang, J., Li, S., & Zhang, S. (2010) · Macromolecules · doi:10.1021/ma100260a · Cited by 442
Varcoe, J. R., Slade, R. C. T., Lam How Yee, E., Poynton, S. D., Driscoll, D. J., & Apperley, D. C. (2007) · Chemistry of Materials · doi:10.1021/cm062407u · Cited by 383
Anion Exchange Membranes by Bromination of Benzylmethyl-Containing Poly(sulfone)s
Yan, J., & Hickner, M. A. (2010) · Macromolecules · doi:10.1021/ma902430y · Cited by 365
A Platinum‐Free Zero‐Carbon‐Emission Easy Fuelling Direct Hydrazine Fuel Cell for Vehicles
Asazawa, K., Yamada, K., Tanaka, H., Oka, A., Taniguchi, M., & Kobayashi, T. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701334 · Cited by 338
Cross-Linked Alkaline Ionic Liquid-Based Polymer Electrolytes for Alkaline Fuel Cell Applications
Lin, B., Qiu, L., Lu, J., & Yan, F. (2010) · Chemistry of Materials · doi:10.1021/cm102957g · Cited by 314
Research works printed but not linked: 2
- Yan, 2010, Macromolecules, 43, 2349, 10.1021/ma902430y · DOI · Paper page
- Varcoe, 2007, Chem. Mater., 19, 2686, 10.1021/cm062407u · DOI · Paper page
Cited by
Anion-exchange membranes in electrochemical energy systems
Varcoe, J. R., Atanassov, P., Dekel, D. R., Herring, A. M., Hickner, M. A., Kohl, P. A., Kucernak, A. R., Mustain, W. E., Nijmeijer, K., Scott, K., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01303d · Cited by 2,051
Noonan, K. J. T., Hugar, K. M., Kostalik, H. A., Lobkovsky, E. B., Abruña, H. D., & Coates, G. W. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307466s · Cited by 490
Advances and challenges in alkaline anion exchange membrane fuel cells
Pan, Z. F., An, L., Zhao, T. S., & Tang, Z. K. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.01.001 · Cited by 484
Hugar, K. M., Kostalik, H. A., & Coates, G. W. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02879 · Cited by 465
Ramaswamy, N., & Mukerjee, S. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00157 · Cited by 439
Designing Advanced Alkaline Polymer Electrolytes for Fuel Cell Applications
Pan, J., Chen, C., Zhuang, L., & Lu, J. (2012) · Accounts of Chemical Research · doi:10.1021/ar200201x · Cited by 400
Alkaline fuel cell technology - A review
Ferriday, T. B., & Middleton, P. H. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.02.203 · Cited by 381
“…ketone) (PEEK) [115], poly-ethylene [100,116,117], poly(phenylene oxide) (PPO) [118 e 120], poly(ether sulphone) (PES) [121], polysulphone [122,123]) onto which functional cationic end-groups are attached (f.ex. QA [103,108,114,119], imidazolium [115,120,122,124,125], guanidinium [123]…”
BackgroundWhat is Next in Anion‐Exchange Membrane Water Electrolyzers? Bottlenecks, Benefits, and Future
Santoro, C., Lavacchi, A., Mustarelli, P., Di Noto, V., Elbaz, L., Dekel, D. R., & Jaouen, F. (2022) · ChemSusChem · doi:10.1002/cssc.202200027 · Cited by 337
Cheng, J., He, G., & Zhang, F. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.04.040 · Cited by 316
Self-citationAlkaline Stable C2-Substituted Imidazolium-Based Anion-Exchange Membranes
Lin, B., Dong, H., Li, Y., Si, Z., Gu, F., & Yan, F. (2013) · Chemistry of Materials · doi:10.1021/cm400468u · Cited by 307
A review on recent developments of anion exchange membranes for fuel cells and redox flow batteries
Maurya, S., Shin, S.-H., Kim, Y., & Moon, S.-H. (2015) · RSC Advances · doi:10.1039/c5ra04741b · Cited by 264
Lin, B., Qiu, L., Qiu, B., Peng, Y., & Yan, F. (2011) · Macromolecules · doi:10.1021/ma202159d · Cited by 262
Deavin, O. I., Murphy, S., Ong, A. L., Poynton, S. D., Zeng, R., Herman, H., & Varcoe, J. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22466f · Cited by 242
Anion‐Exchange Membranes for Alkaline Fuel‐Cell Applications: The Effects of Cations
Sun, Z., Lin, B., & Yan, F. (2018) · ChemSusChem · doi:10.1002/cssc.201701600 · Cited by 238
Chen, D., & Hickner, M. A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301557w · Cited by 235
Development of imidazolium-type alkaline anion exchange membranes for fuel cell application
Ran, J., Wu, L., Varcoe, J. R., Ong, A. L., Poynton, S. D., & Xu, T. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.05.006 · Cited by 229
Qiu, B., Lin, B., Qiu, L., & Yan, F. (2012) · J. Mater. Chem. · doi:10.1039/c1jm14331j · Cited by 201
Tertiary sulfonium as a cationic functional group for hydroxide exchange membranes
Zhang, B., Gu, S., Wang, J., Liu, Y., Herring, A. M., & Yan, Y. (2012) · RSC Advances · doi:10.1039/c2ra21402d · Cited by 198
Towards highly efficient electrochemical CO2 reduction: Cell designs, membranes and electrocatalysts
Tufa, R. A., Chanda, D., Ma, M., Aili, D., Demissie, T. B., Vaes, J., Li, Q., Liu, S., & Pant, D. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115557 · Cited by 190
Aryl ether-free polymer electrolytes for electrochemical and energy devices
Park, E. J., Jannasch, P., Miyatake, K., Bae, C., Noonan, K., Fujimoto, C., Holdcroft, S., Varcoe, J. R., Henkensmeier, D., Guiver, M. D., et al. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00186e · Cited by 188
Anion Exchange Membranes for Fuel Cells: State‐of‐the‐Art and Perspectives
Chen, H., Tao, R., Bang, K., Shao, M., & Kim, Y. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200934 · Cited by 180
Highly stable anion exchange membranes based on quaternized polypropylene
Zhang, M., Liu, J., Wang, Y., An, L., Guiver, M. D., & Li, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01420d · Cited by 173
Gu, F., Dong, H., Li, Y., Si, Z., & Yan, F. (2014) · Macromolecules · doi:10.1021/ma402334t · Cited by 173
Anion Exchange Membranes for Fuel Cell Application: A Review
Das, G., Choi, J.-H., Nguyen, P. K. T., Kim, D.-J., & Yoon, Y. S. (2022) · Polymers · doi:10.3390/polym14061197 · Cited by 171
“Furthermore, its high chemical inertness makes it suitable for application in fuel cell membranes [129].”
BackgroundZhao, Y., Li, M., Yuan, Z., Li, X., Zhang, H., & Vankelecom, I. F. J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503390 · Cited by 167
Self-citationLin, X., Wu, L., Liu, Y., Ong, A. L., Poynton, S. D., Varcoe, J. R., & Xu, T. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.062 · Cited by 167
Recent advances in the preparation of functionalized polysulfones
Dızman, C., Taşdelen, M. A., & Yağcı, Y. (2013) · Polymer International · doi:10.1002/pi.4525 · Cited by 155
Ran, J., Wu, L., Ru, Y., Hu, M., Din, L., & Xu, T. (2015) · Polymer Chemistry · doi:10.1039/c4py01671h · Cited by 152
Lin, X., Varcoe, J. R., Poynton, S. D., Liang, X., Ong, A. L., Ran, J., Li, Y., & Xu, T. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10308k · Cited by 155
Zhang, H., Zhang, H., Zhang, F., Li, X., Li, Y., & Vankelecom, I. F. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24174b · Cited by 144
Self-citationLi, X. H., Yu, Y., & Meng, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302844x · Cited by 138
Highly Stable Anion Exchange Membranes with Internal Cross‐Linking Networks
Xu, W., Zhao, Y., Yuan, Z., Li, X., Zhang, H., & Vankelecom, I. F. J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500284 · Cited by 138
Self-citationLiu, L., Li, Q., Dai, J., Wang, H., Jin, B., & Bai, R. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.10.054 · Cited by 134
Zhuo, Y., Lai, A. L., Zhang, Q. G., Zhu, A. M., Ye, M. L., & Liu, Q. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04257g · Cited by 135
Willdorf‐Cohen, S., Mondal, A. N., Dekel, D. R., & Diesendruck, C. E. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05785k · Cited by 131
Si, Z., Qiu, L., Dong, H., Gu, F., Li, Y., & Yan, F. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500022c · Cited by 132
Li, Q., Liu, L., Miao, Q., Jin, B., & Bai, R. (2014) · Chemical Communications · doi:10.1039/c3cc47897a · Cited by 131
High Hydroxide Conductivity in Polymerized Ionic Liquid Block Copolymers
Ye, Y., Sharick, S., Davis, E. M., Winey, K. I., & Elabd, Y. A. (2013) · ACS Macro Letters · doi:10.1021/mz400210a · Cited by 141
Lin, X., Liang, X., Poynton, S. D., Varcoe, J. R., Ong, A. L., Ran, J., Li, Y., Li, Q., & Xu, T. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.04.059 · Cited by 123
Ono, H., Kimura, T., Takano, A., Asazawa, K., Miyake, J., Inukai, J., & Miyatake, K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta09409d · Cited by 119
Yan, X., Gu, S., He, G., Wu, X., & Benziger, J. B. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.140 · Cited by 123
Lai, A. N., Wang, L. S., Lin, C., Zhuo, Y., Zhang, Q. G., Zhu, A. M., & Liu, Q. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01475 · Cited by 117
Yang, J., Wang, J., Liu, C., Gao, L., Xu, Y., Che, Q., & He, R. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.06.010 · Cited by 111
Bis-imidazolium-based anion-exchange membranes for alkaline fuel cells
Qiu, B., Lin, B., Si, Z., Qiu, L., Chu, F., Zhao, J., & Yan, F. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.06.041 · Cited by 105
Stabilizing the Imidazolium Cation in Hydroxide‐Exchange Membranes for Fuel Cells
Wang, J., Gu, S., Kaspar, R. B., Zhang, B., & Yan, Y. S. (2013) · ChemSusChem · doi:10.1002/cssc.201300285 · Cited by 107
Aromatic polyelectrolytes via polyacylation of pre-quaternized monomers for alkaline fuel cells
Zhang, Z., Wu, L., Varcoe, J. R., Li, C., Ong, A. L., Poynton, S. D., & Xu, T. (2012) · Journal of Materials Chemistry A · doi:10.1039/c2ta01178f · Cited by 105
Anion‐Exchange Membranes for Fuel Cells: Synthesis Strategies, Properties and Perspectives
Zhang, H., Chen, D., Yin, X., & Yin, S. (2015) · Fuel Cells · doi:10.1002/fuce.201500039 · Cited by 104
Self-citationQu, C., Zhang, H., Zhang, F., & Лю, Б. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm16211c · Cited by 102
Self-citationA stable anion exchange membrane based on imidazolium salt for alkaline fuel cell
Yang, Y., Wang, J., Zheng, J., Li, S., & Zhang, S. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.05.017 · Cited by 103
Gong, X., Yan, X., Li, T., Wu, X., Chen, W., Huang, S., Wu, Y., Zhen, D., & He, G. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.09.050 · Cited by 98
Rao, H. N. A., Nam, S. Y., & Kim, T. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01123j · Cited by 100
Price, S. C., Williams, K. S., & Beyer, F. L. (2014) · ACS Macro Letters · doi:10.1021/mz4005452 · Cited by 98
Hydrophilic side chain assisting continuous ion-conducting channels for anion exchange membranes
Pan, Y., Zhang, Q., Yan, X., Liu, J., Xu, X., Wang, T., Hamouti, I. E., Ruan, X., Hao, C., & He, G. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.02.020 · Cited by 97
Zhou, T., Shao, R., Chen, S., He, X., Qiao, J., & Zhang, J. J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.026 · Cited by 96
Huang, T., He, G., Xue, J., Otoo, O. N., He, X., Jiang, H., Zhang, J., Yin, Y. S., Jiang, Z., Douglin, J. C., et al. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117769 · Cited by 91
Arges, C. G., & Ramani, V. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.056309jes · Cited by 89
Sriram, G., Dhanabalan, K., Ajeya, K. V., Aruchamy, K., Ching, Y. C., Oh, T. H., Jung, H.-Y., & Kurkuri, M. D. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta04298g · Cited by 103
Imidazolium-based organic–inorganic hybrid anion exchange membranes for fuel cell applications
Feng, T., Lin, B., Zhang, S., Yuan, N., Chu, F., Hickner, M. A., Wang, C., Zhu, L. J., & Ding, J. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.02.019 · Cited by 89
Hwang, H. J., Chi, W. S., Kwon, O., Lee, J. G., Kim, J. H., & Shul, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07841 · Cited by 86
Jasti, A., Prakash, S., & Shahi, V. K. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.11.016 · Cited by 88
Yang, B., & Cunman, Z. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.141094 · Cited by 89
Shi, B., Li, Y., Zhang, H., Wu, W., Ding, R. F., Dang, J., & Wang, J. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.10.005 · Cited by 81
Self-citationLi, X. H., Liu, Q., Yu, Y., & Meng, Y. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta00342f · Cited by 84
Si, Z., Sun, Z., Gu, F., Qiu, L., & Yan, F. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta15178f · Cited by 80
Amel, A., Zhu, L. J., Hickner, M. A., & Ein‐Eli, Y. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.044405jes · Cited by 79
Li, Z., Wang, W., Yu, H., Zhang, L., Li, S., Tang, B. H., Xu, S., & Xu, Z. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.018 · Cited by 76
Duan, X., Wang, C., Wang, T., Xie, X., Zhou, X., & Ye, Y. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.02.004 · Cited by 76
Liu, Y., Wang, J., Yang, Y., Brenner, T. M., Seifert, S., Yan, Y. S., Liberatore, M. W., & Herring, A. M. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5027674 · Cited by 79
Lu, W., Shao, Z., Zhang, G., Zhao, Y., Li, J., & Yi, B. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.05.070 · Cited by 78
“9 w16 (60 C, 200 kPa) 2 IM-functionalized PSF [16]”
BackgroundMethodInfluentialMeek, K. M., Nykaza, J. R., & Elabd, Y. A. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00434 · Cited by 79
Gu, S., Skovgard, J., & Yan, Y. S. (2012) · ChemSusChem · doi:10.1002/cssc.201200057 · Cited by 84
Liao, J., Zhu, J., Yang, S., Pan, N., Yu, X., Wang, C., Li, J., & Shen, J. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.12.066 · Cited by 77
Ion conductive membranes for flow batteries: Design and ions transport mechanism
Dai, Q., Zhao, Z., Shi, M., Deng, C., Zhang, H., & Li, X. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2021.119355 · Cited by 77
Self-citationSynthesis and Properties of Anion Conductive Ionomers Containing Tetraphenyl Methane Moieties
Li, X. H., Yu, Y., Liu, Q., & Meng, Y. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3007005 · Cited by 75
Xue, D. Q., Xue, B., Qian, H., Zheng, J., Li, S., & Zhang, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.114 · Cited by 76
Yang, J., Liu, C., Hao, Y., He, X., & He, R. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.176 · Cited by 75
A general strategy to enhance the alkaline stability of anion exchange membranes
Chen, J., Li, C., Wang, J., Li, L., & Wei, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00879a · Cited by 77
Page, O. M. M., Poynton, S. D., Murphy, S., Ong, A. L., Hillman, D. M., Hancock, C. A., Hale, M. G., Apperley, D. C., & Varcoe, J. R. (2012) · RSC Advances · doi:10.1039/c2ra22331g · Cited by 74
Kim, Y., Moh, L. C. H., & Swager, T. M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13058 · Cited by 74
Chen, J., Guan, M., Li, K., & Tang, S. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b22916 · Cited by 72
Xu, P. Y., Zhou, K. C., Han, G. L., Zhang, Q. G., Zhu, A. M., & Liu, Q. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5017599 · Cited by 74
White, W., Sanborn, C. D., Fabian, D. M., & Ardo, S. (2017) · Joule · doi:10.1016/j.joule.2017.10.015 · Cited by 72
Sturgeon, M. R., Macomber, C. S., Engtrakul, C., Long, H., & Pivovar, B. S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0271504jes · Cited by 72
Xue, D. Q., Hou, S., Mao, H., Zheng, J., & Zhang, S. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.06.036 · Cited by 69
Ryoo, G. W., Park, S. H., Kwon, K. C., Kang, J. H., Jang, H. W., & Kwon, M. S. (2024) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2024.01.070 · Cited by 77
Lai, A. N., Wang, L. S., Lin, C., Zhuo, Y., Zhang, Q. G., Zhu, A. M., & Liu, Q. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.02.013 · Cited by 72
Facilitating hydroxide transport in anion exchange membranes via hydrophilic grafts
He, S. S., & Frank, C. W. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02942a · Cited by 69
Liu, M., Wang, Z., Mei, J., Xu, J., Xu, L., Han, H., Ni, H., & Wang, S. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.01.036 · Cited by 69
Li, X. H., Yu, Y., Liu, Q., & Meng, Y. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.02.041 · Cited by 68
Schropp, E., Campos-Carriedo, F., Iribarren, D., Naumann, G., Bernäcker, C. I., Gaderer, M., & Dufour, J. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.122247 · Cited by 80
Molecular Simulation of Quaternary Ammonium Solutions at Low Hydration Levels
Pusara, S., Srebnik, S., & Dekel, D. R. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b00752 · Cited by 63
(2015) · doi:10.1016/j.memsci.2015.12.012 · Cited by 64
Self-citation
Metadata
- Authors
- Zhang, F., Zhang, H., & Qu, C.
- Affiliations
- Dalian Institute of Chemical Physics (CN)
- Corresponding author
- Zhang, Fengxiang
- Zhang, Huamin
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 34
- Pages
- 12744
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2078925097
- Cited by
- 302
- References
- 42
- Citations by year
- 2026: 1 · 2025: 8 · 2024: 10 · 2023: 12 · 2022: 18 · 2021: 20 · 2020: 16 · 2019: 22 · 2018: 28 · 2017: 32 · 2016: 28 · 2015: 35 · 2014: 22 · 2013: 26 · 2012: 21
- FWCI
- 16.13
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry (publishedVersion)
- Dalian Institute of Chemical Physics, CAS Institutional Repository (submittedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane-based Ion Separation Techniques
- Keywords
- anion exchange membrane fuel cells, chloromethylated polysulfone, alkaline stability, ion exchange capacity, thermal stability, H2/O2 fuel cells, oxygen reduction kinetics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.