The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Dye-containing polymers: methods for preparation of mechanochromic materials
Abstract
The detection of mechanical stress in polymeric materials through optical variations has attracted considerable interest over the past ten years. In this tutorial review, the current state of knowledge concerning the preparation of polymers with mechanochromic features is summarized. Two types of procedures are illustrated and thoroughly discussed along with their respective structure-property relationships: the first resides in the physical dispersion of the dye in the form of supramolecular aggregates in a preformed polymer matrix; the second involves the covalent insertion of chromophoric units into the macromolecule backbone or side chains. Herein we review the simplicity of the preparative routes available, and their influence over the properties of the resulting dye-polymer systems, by focussing on the most illustrative examples described in the literature. Special reference is made to stimuli-responsiveness as a mechanical means towards innovative smart and intelligent materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Aggregation-induced emission of 1-methyl-1,2,3,4,5-pentaphenylsilole
Luo, J., Xie, Z., Lam, J. W. Y., Cheng, L., Tang, B. Z., Chen, H., Qiu, C., Kwok, H. S., Zhan, X., Liu, Y., et al. (2001) · Chemical Communications · doi:10.1039/b105159h · Cited by 8,358
Hong, Y., Lam, J. W. Y., & Tang, B. Z. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15113d · Cited by 6,363
The exciton model in molecular spectroscopy
Kasha, M., Rawls, H. R., & Ashraf El-Bayoumi, M. (1965) · Pure and Applied Chemistry · doi:10.1351/pac196511030371 · Cited by 4,253
New sensing mechanisms for design of fluorescent chemosensors emerging in recent years
Wu, J., Liu, W., Ge, J., Zhang, H., & Wang, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00224k · Cited by 1,858
Recent advances in organic mechanofluorochromic materials
Chi, Z., Zhang, X., Xu, B., Zhou, X., Ma, C., Zhang, Y., Liu, S., & Xu, J. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35016e · Cited by 1,787
Force-induced activation of covalent bonds in mechanoresponsive polymeric materials
Davis, D. A., Hamilton, A., Yang, J., Cremar, L. D., Van Gough, D., Potisek, S. L., Ong, M. T., Braun, P. V., Martínez, T. J., White, S. R., et al. (2009) · Nature · doi:10.1038/nature07970 · Cited by 1,754
Stimuli-responsive supramolecular polymeric materials
Yan, X., Wang, F., Zheng, B., & Huang, F. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35091b · Cited by 1,631
Future perspectives and recent advances in stimuli-responsive materials
Roy, D., Cambre, J. N., & Sumerlin, B. S. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.10.008 · Cited by 1,474
Introduction to Physical Polymer Science
Stamm, M. (2006) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600086 · Cited by 1,233
Semiconducting polymers: the Third Generation
Heeger, A. J. (2010) · Chemical Society Reviews · doi:10.1039/b914956m · Cited by 1,134
Introduction to polymer viscoelasticity
(2005) · Choice Reviews Online · doi:10.5860/choice.43-2216 · Cited by 980
Yoon, S.-J., Chung, J. W., Gierschner, J., Kim, K. S., Choi, M.-G., Kim, D., & Park, S. Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1044665 · Cited by 950
Structural Colors in Nature: The Role of Regularity and Irregularity in the Structure
Kinoshita, S., & Yoshioka, S. (2005) · ChemPhysChem · doi:10.1002/cphc.200500007 · Cited by 878
Haddock, S. H. D., Moline, M. A., & Case, J. F. (2010) · Annual Review of Marine Science · doi:10.1146/annurev-marine-120308-081028 · Cited by 849
Chen, Y., Spiering, A. J. H., Karthikeyan, S., Peters, G. W. M., Meijer, E. W., & Sijbesma, R. P. (2012) · Nature Chemistry · doi:10.1038/nchem.1358 · Cited by 704
Polymers: chemistry and physics of modern materials
(2008) · Choice Reviews Online · doi:10.5860/choice.45-3794 · Cited by 703
Industrial Dyes?Chemistry, Properties, Applications
Lazar, T. (2005) · Color Research & Application · doi:10.1002/col.20081 · Cited by 652
Mechanophore-Linked Addition Polymers
Potisek, S. L., Davis, D. A., Sottos, N. R., White, S. R., & Moore, J. S. (2007) · Journal of the American Chemical Society · doi:10.1021/ja076189x · Cited by 397
Lampert, C. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00123-3 · Cited by 369
Chromic Phenomena: Technological Applications of Colour Chemistry
Bamfield, P. (2001) · Cited by 361
Löwe, C., & Weder, C. (2002) · Advanced Materials · doi:10.1002/1521-4095(20021118)14:22<1625::aid-adma1625>3.0.co;2-q · Cited by 361
Deformation-Induced Color Changes in Melt-Processed Photoluminescent Polymer Blends
Crenshaw, B. R., & Weder, C. (2003) · Chemistry of Materials · doi:10.1021/cm034447t · Cited by 291
Pucci, A., & Ruggeri, G. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03653f · Cited by 235
Self-citationPucci, A., Di Cuia, F., Signori, F., & Ruggeri, G. (2007) · J. Mater. Chem. · doi:10.1039/b612033d · Cited by 215
Self-citationStress Sensing in Polycaprolactone Films via an Embedded Photochromic Compound
O’Bryan, G., Wong, B. M., & McElhanon, J. R. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100050v · Cited by 213
Polyesters with Built-in Threshold Temperature and Deformation Sensors
Kinami, M., Crenshaw, B. R., & Weder, C. (2006) · Chemistry of Materials · doi:10.1021/cm052186c · Cited by 206
Deformation-Induced Color Changes in Mechanochromic Polyethylene Blends
Crenshaw, B. R., Burnworth, M., Khariwala, D., Hiltner, A., Mather, P. T., Simha, R., & Weder, C. (2007) · Macromolecules · doi:10.1021/ma062936j · Cited by 198
Polymer composites with smart optical properties
Pucci, A., Bizzarri, R., & Ruggeri, G. (2011) · Soft Matter · doi:10.1039/c0sm01038c · Cited by 183
Self-citationHandbook of Stimuli‐Responsive Materials
(2011) · Wiley eBooks · doi:10.1002/9783527633739 · Cited by 178
Polymer mechanochemistry: the design and study of mechanophores
Brantley, J. N., Wiggins, K. M., & Bielawski, C. W. (2013) · Polymer International · doi:10.1002/pi.4350 · Cited by 166
Self-Assessing Photoluminescent Polyurethanes
Crenshaw, B. R., & Weder, C. (2006) · Macromolecules · doi:10.1021/ma061685b · Cited by 135
Dye-labelled polymer chains at specific sites: Synthesis by living/controlled polymerization
Beija, M., Charreyre, M., & Martinho, J. M. G. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.06.004 · Cited by 135
Donati, F., Pucci, A., Cappelli, C., et al. (2008) · The Journal of Physical Chemistry B · doi:10.1021/jp711193u · Cited by 129
Self-citationRole of Mechanophore Orientation in Mechanochemical Reactions
Beiermann, B. A., Kramer, S., Moore, J. S., White, S. R., & Sottos, N. R. (2011) · ACS Macro Letters · doi:10.1021/mz2000847 · Cited by 123
industrial Plastics: theory and applications
Lokensgard, E. (2017) · Cited by 107
Kunzelman, J., Crenshaw, B. R., Kinami, M., & Weder, C. (2006) · Macromolecular Rapid Communications · doi:10.1002/marc.200600642 · Cited by 91
Vapochromic and mechanochromic films from square-planar platinum complexes in polymethacrylates
Kumpfer, J. R., Taylor, S. D., Connick, W. B., & Rowan, S. J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32160b · Cited by 90
Polymer Mechanochemistry: Force Enabled Transformations
Wiggins, K. M., Brantley, J. N., & Bielawski, C. W. (2012) · ACS Macro Letters · doi:10.1021/mz300167y · Cited by 73
Threshold Temperature Sensors with Tunable Properties
Crenshaw, B. R., Kunzelman, J., Sing, C. E., Ander, C., & Weder, C. (2007) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600622 · Cited by 63
Lott, J. R., & Weder, C. (2009) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900476 · Cited by 61
Pucci, A., Signori, F., Bizzarri, R., Bronco, S., Ruggeri, G., & Ciardelli, F. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00057d · Cited by 44
Self-citationDonati, F., Pucci, A., & Ruggeri, G. (2009) · Physical Chemistry Chemical Physics · doi:10.1039/b903120k · Cited by 37
Self-citationAssociation phenomena of a chiral perylene derivative in solution and in poly(ethylene) dispersion
Pucci, A., Donati, F., Nazzi, S., Uccello‐Barretta, G., Pescitelli, G., Bari, L. D., & Ruggeri, G. (2010) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2010.09.001 · Cited by 20
Self-citationBioluminescence of Marine Organisms
Goto, T. (1980) · Elsevier eBooks · doi:10.1016/b978-0-12-624003-0.50011-6 · Cited by 9
Cited by
The exciton model in molecular spectroscopy
Kasha, M., Rawls, H. R., & Ashraf El-Bayoumi, M. (1965) · Pure and Applied Chemistry · doi:10.1351/pac196511030371 · Cited by 4,253
Aggregation‐Induced Emission: The Whole Is More Brilliant than the Parts
Mei, J., Hong, Y., Lam, J. W. Y., Qin, A., Tang, Y., & Tang, B. Z. (2014) · Advanced Materials · doi:10.1002/adma.201401356 · Cited by 3,381
Mechanoresponsive Luminescent Molecular Assemblies: An Emerging Class of Materials
Sagara, Y., Yamane, S., Mitani, M., Weder, C., & Kato, T. (2016) · Advanced Materials · doi:10.1002/adma.201502589 · Cited by 890
Mechanoluminescence Rebrightening the Prospects of Stress Sensing: A Review
Zhuang, Y., & Xie, R. (2021) · Advanced Materials · doi:10.1002/adma.202005925 · Cited by 507
Recent advances in purely organic phosphorescent materials
Mukherjee, S., & Thilagar, P. (2015) · Chemical Communications · doi:10.1039/c5cc03114a · Cited by 474
Metadata
- Authors
- Ciardelli, F., Ruggeri, G., & Pucci, A.
- Venue
- Chem. Soc. Rev.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 42
- Issue
- 3
- Pages
- 857-870
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W1986591131
- Cited by
- 454
- References
- 44
- FWCI
- 2.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.