Roll-to-roll coated PBI membranes for high temperature PEM fuel cells
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
We employed roll-to-roll coating in the preparation of 40 μm thick poly[2,2′(m-phenylene)-5,5′bibenzimidazole] (PBI) films for fuel cells using both knife-coating (KC) and slot-die (SD) coating. The films were coated directly from a 9% (w/w) solution of PBI in dimethylacetamide onto a sacrificial low cost paper or plastic based carrier substrate and dried using a hot air oven with a length of 1 m at 140 °C. A web width of 305 mm, a working width of 250 mm and a web speed of 0.2 m min−1 were explored to ensure efficient drying of the thick wet film. A large air flow was found to efficiently avoid skinning. Films were prepared by a single coating step and by two subsequent coating steps in order to explore whether two coating steps gave films with fewer defects. A significant development towards upscaling the PEM fuel cell technology was that the PBI membrane was coated onto a sacrificial carrier substrate allowing for easy recoating on top of the firstly prepared film. It was thus possible to prepare free-standing films by a simple coating procedure followed by delamination from the carrier substrate post-film formation and drying. We finally carried out systematic membrane characterization with respect to solubility, phosphoric acid doping and fuel cell performance. Our results showed that the PBI membranes prepared in this work have identical properties compared to traditionally cast membranes while enabling an increase of a factor of 100 in manufacturing speed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Acid‐Doped Polybenzimidazoles: A New Polymer Electrolyte
Wainright, J. S., Wang, J. ‐., Weng, D., Savinell, R. F., & Litt, M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044337 · Cited by 1,251
Cited by
Roll‐to‐Roll fabrication of large area functional organic materials
Søndergaard, R. R., Hösel, M., & Krebs, F. C. (2013) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23192 · Cited by 1,065
Self-citationHaider, R., Wen, Y., Ma, Z.-F., Wilkinson, D. P., Zhang, L., Yuan, X., Song, S., & Zhang, J. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00296h · Cited by 785
Qiu, D., Peng, L., Lai, X., Ni, M., & Lehnert, W. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109289 · Cited by 208
Roll-to-Roll Coating Technology and Its Applications: A Review
Park, J., Shin, K., & Lee, C. (2016) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-016-0067-z · Cited by 140
Gravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layers
Mauger, S. A., Neyerlin, K. C., Yang-Neyerlin, A. C., More, K. L., & Ulsh, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0091813jes · Cited by 81
Metadata
- Authors
- Steenberg, T., Hjuler, H. A., Terkelsen, C., Sánchez, M. T. R., Cleemann, L. N., & Krebs, F. C.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 3
- Pages
- 6076
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2023634059
- Cited by
- 76
- References
- 1
- FWCI
- 4.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.