The DOI matches its Crossref record.
Stainless steel is a promising electrode material for anodes of microbial fuel cells
Open accessAbstract
The abilities of carbon cloth, graphite plate and stainless steel to form microbial anodes were compared under identical conditions. Each electrode was polarised at −0.2 V vs. SCE in soil leachate and fed by successive additions of 20 mM acetate. Under these conditions, the maximum current densities provided were on average 33.7 A m−2 for carbon cloth, 20.6 A m−2 for stainless steel, and 9.5 A m−2 for flat graphite. The high current density obtained with carbon cloth was obviously influenced by the three-dimensional electrode structure. Nevertheless, a fair comparison between flat electrodes demonstrated the great interest of stainless steel. The comparison was even more in favour of stainless steel at higher potential values. At +0.1 V vs. SCE stainless steel provided up to 35 A m−2, while graphite did not exceed 11 A m−2. This was the first demonstration that stainless steel offers a very promising ability to form microbial anodes. The surface topography of the stainless steel did not significantly affect the current provided. Analysis of the voltammetry curves allowed two groups of electrode materials to be distinguished by their kinetics. The division into two well-defined kinetics groups proved to be appropriate for a wide range of microbial anodes described in the literature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Baudler, A., Schmidt, I., Langner, M., Greiner, A., & Schröder, U. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00866b · Cited by 385
Ganiyu, S. O., Martínez-Huitle, C. A., & Rodrigo, M. A. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.118857 · Cited by 334
Sonawane, J. M., Yadav, A., Ghosh, P. C., & Adeloju, S. B. (2017) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2016.10.014 · Cited by 331
Qian, L., Gu, L., Yang, L., Yuan, H., & Xiao, D. (2013) · Nanoscale · doi:10.1039/c3nr01104f · Cited by 324
Rousseau, R., Etcheverry, L., Roubaud, E., Basséguy, R., Délia, M.-L., & Bergel, A. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.113938 · Cited by 323
Self-citation
Metadata
- Authors
- Pocaznoi, D., Calmet, A., Etcheverry, L., Erable, B., & Bergel, A.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 11
- Pages
- 9645
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2049763755
- Cited by
- 206
- References
- 0
- FWCI
- 9.18
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Stainless steel is a promising electrode material for anodes of microbial fuel cells. https://app.cochat.ai/papers/10.1039/c2ee22429a
- The paper
- Pocaznoi, D., Calmet, A., Etcheverry, L., Erable, B., & Bergel, A. (2012). Stainless steel is a promising electrode material for anodes of microbial fuel cells. Energy & Environmental Science. https://doi.org/10.1039/c2ee22429a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.