The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Step-change in high temperature steam electrolysis performance of perovskite oxide cathodes with exsolution of B-site dopants
Abstract
B-site doped, A-site deficient perovskite oxide titanates with formula La0.4Sr0.4Mn+xTi1−xO3−γ−δ (M = Fe3+ or Ni2+; x = 0.06; γ = (4 − n)x/2) were employed as solid oxide electrolysis cell (SOEC) cathodes for hydrogen production via high temperature steam electrolysis at 900 °C. A-site deficiency provided additional driving force for the exsolution of a proportion of B-site dopants at the surface in the form of metallic nanoparticles under reducing SOEC cathode operating conditions. In the case of La0.4Sr0.4Fe0.06Ti0.94O2.97, this represents the first time that Fe0 has been exsolved from a perovskite in such a way. Exsolution was due in part to the inability of the host lattice to accommodate vacancies (introduced (δ) oxygen vacancies () and fixed A-site () and inherent (γ) oxygen vacancies) beyond a certain limit. The presence of electrocatalytically active Fe0 or Ni0 nanoparticles and higher concentrations dramatically lowered the activation barrier to steam electrolysis compared to the parent material (x = 0). The use of defect chemistry to drive the exsolution of less reducible dopant cations could conceivably be extended to produce new catalytically active perovskites with unique properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
The classification of tilted octahedra in perovskites
Glazer, A. M. (1972) · Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry · doi:10.1107/s0567740872007976 · Cited by 3,901
Advanced anodes for high-temperature fuel cells
Atkinson, A., Barnett, S., Gorte, R. J., Irvine, J. T. S., McEvoy, A. J., Mogensen, M., Singhal, S. C., & Vohs, J. (2004) · Nature Materials · doi:10.1038/nmat1040 · Cited by 1,427
Self-citationSelf-regeneration of a Pd-perovskite catalyst for automotive emissions control
Nishihata, Y., Mizuki, J., Akao, T., Tanaka, H., Uenishi, M., Kimura, M., Okamoto, T., & Hamada, N. (2002) · Nature · doi:10.1038/nature00893 · Cited by 1,163
Group-Theoretical Analysis of Octahedral Tilting in Perovskites
Howard, C. J., & Stokes, H. T. (1998) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768198004200 · Cited by 746
Thermal, electrical, and electrocatalytical properties of lanthanum-doped strontium titanate
Marina, O. A. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00140-6 · Cited by 583
Hydrogen and synthetic fuel production from renewable energy sources
Jensen, S. H., Larsen, P. H., & Mogensen, M. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.04.042 · Cited by 529
Disruption of extended defects in solid oxide fuel cell anodes for methane oxidation
Ruiz-Morales, J. C., Canales‐Vázquez, J., Savaniu, C. D., Marrero‐López, D., Zhou, W., & Irvine, J. T. S. (2006) · Nature · doi:10.1038/nature04438 · Cited by 405
Self-citationThe Electrochemistry of Ni Pattern Anodes Used as Solid Oxide Fuel Cell Model Electrodes
Bieberle‐Hütter, A., Meier, L. P., & Gauckler, L. J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1372219 · Cited by 317
Howard, C. J., & Stokes, H. T. (2005) · Acta Crystallographica Section A Foundations of Crystallography · doi:10.1107/s0108767304024493 · Cited by 248
Tanaka, H., Uenishi, M., Taniguchi, M., Tan, I., Narita, K., Kimura, M., Kaneko, K., Nishihata, Y., & Mizuki, J. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.05.029 · Cited by 237
Perovskite Sr2Fe1.5Mo0.5O6−δ as electrode materials for symmetrical solid oxide electrolysis cells
Liu, Q., Yang, C., Dong, X., & Chen, F. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.08.016 · Cited by 224
Neagu, D., & Irvine, J. T. S. (2010) · Chemistry of Materials · doi:10.1021/cm101508w · Cited by 212
Self-citationCai, Z., Kuru, Y., Han, J. W., Chen, Y., & Yildiz, B. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2059445 · Cited by 178
Yang, X., & Irvine, J. T. S. (2008) · Journal of Materials Chemistry · doi:10.1039/b800163d · Cited by 176
Self-citationKobsiriphat, W., Madsen, B. D., Wang, Y., Shah, M. N., Marks, L. D., & Barnett, S. A. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3269993 · Cited by 146
Enhancing Electronic Conductivity in Strontium Titanates through Correlated A and B-Site Doping
Neagu, D., & Irvine, J. T. S. (2011) · Chemistry of Materials · doi:10.1021/cm103489r · Cited by 112
Self-citationTolerance factor rules for Sr1−x−yCaxBayMnO3 perovskites
Dąbrowski, B., Chmaissem, O., Mais, J., Koleśnik, S., Jorgensen, J. D., & Short, S. (2003) · Journal of Solid State Chemistry · doi:10.1016/s0022-4596(02)00056-7 · Cited by 103
Smith, M. D., Stepan, A. F., Ramarao, C., Brennan, P. E., & Ley, S. V. (2003) · Chemical Communications · doi:10.1039/b308465e · Cited by 85
Highly Active and Thermally Stable Core-Shell Catalysts for Solid Oxide Fuel Cells
Kim, J., Wieder, N. L., Abraham, A. J., Cargnello, M., Fornasiero, P., Gorte, R. J., & Vohs, J. M. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3571039 · Cited by 58
Cited by
Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers
Irvine, J. T. S., Neagu, D., Verbraeken, M. C., Chatzichristodoulou, C., Graves, C., & Mogensen, M. B. (2016) · Nature Energy · doi:10.1038/nenergy.2015.14 · Cited by 769
Self-citationKe, Y., Zhou, C., Zhou, Y., Wang, S., Chan, S. H., & Long, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800113 · Cited by 577
Recent progress in ammonia fuel cells and their potential applications
Jeerh, G., Zhang, M., & Tao, S. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta08810b · Cited by 441
Heterointerface engineering for enhancing the electrochemical performance of solid oxide cells
Zhao, C., Li, Y., Zhang, W., Zheng, Y., Lou, X., Yu, B., Chen, J., Chen, Y., Liu, M., & Wang, J. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02230a · Cited by 319
Metadata
- Authors
- Tsekouras, G., Neagu, D., & Irvine, J. T. S.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 6
- Issue
- 1
- Pages
- 256-266
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2037690931
- Cited by
- 351
- References
- 20
- FWCI
- 5.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
