The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Studies on the Bi2Te3–Bi2Se3–Bi2S3system for mid-temperature thermoelectric energy conversion
Open accessAbstract
Bismuth telluride (Bi2Te3) and its alloys have been widely investigated as thermoelectric materials for cooling applications at around room temperature. We report a systematic study on many compounds in the Bi2Te3–Bi2Se3–Bi2S3 system. All the samples were fabricated by high energy ball milling followed by hot pressing. Among the investigated compounds, Bi2Te2S1 shows a peak ZT ∼0.8 at 300 °C and Bi2Se1S2 ∼0.8 at 500 °C. The results show that these compounds can be used for mid-temperature power generation applications. The leg efficiency of thermoelectric conversion for segmented elements based on these n-type materials could potentially reach 12.5% with a cold side at 25 °C and a hot side at 500 °C if appropriate p-type legs are paired, which could compete well with the state-of-the-art n-type materials within the same temperature range, including lead tellurides, lead selenides, lead sulfides, filled-skutterudites, and half Heuslers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Self-citationConvergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Introduction to Thermoelectricity
Goldsmid, H. J. (2010) · Springer Series in Materials Science · doi:10.1007/978-3-642-00716-3 · Cited by 1,505
Shi, X., Yang, J., Salvador, J. R., Chi, M., Cho, J. Y., Wang, H., Bai, S., Yang, J., Zhang, W., & Chen, L. (2011) · Journal of the American Chemical Society · doi:10.1021/ja111199y · Cited by 1,478
High-performance flat-panel solar thermoelectric generators with high thermal concentration
Kraemer, D., Poudel, B., Feng, H.-P., Caylor, J. C., Yu, B., Yan, X., Ma, Y., Wang, X., Wang, D., Muto, A., et al. (2011) · Nature Materials · doi:10.1038/nmat3013 · Cited by 1,193
Self-citationEffect of Point Imperfections on Lattice Thermal Conductivity
Callaway, J., & von Baeyer, H. C. (1960) · Physical Review · doi:10.1103/physrev.120.1149 · Cited by 1,168
Lattice Thermal Conductivity of Disordered Semiconductor Alloys at High Temperatures
Abeles, B. (1963) · Physical Review · doi:10.1103/physrev.131.1906 · Cited by 1,148
Strained endotaxial nanostructures with high thermoelectric figure of merit
Biswas, K., He, J., Zhang, Q., Wang, G., Uher, C., Dravid, V. P., & Kanatzidis, M. G. (2011) · Nature Chemistry · doi:10.1038/nchem.955 · Cited by 1,034
Self-citationHigh-performance nanostructured thermoelectric materials
Li, J.-F., Liu, W.-S., Zhao, L.-D., & Zhou, M. (2010) · NPG Asia Materials · doi:10.1038/asiamat.2010.138 · Cited by 963
Self-citationRecent advances in thermoelectric nanocomposites
Liu, W., Yan, X., Chen, G., & Ren, Z. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.10.001 · Cited by 735
Self-citation
Cited by
The Thermoelectric Properties of Bismuth Telluride
Witting, I. T., Chasapis, T. C., Ricci, F., Peters, M., Heinz, N. A., Hautier, G., & Snyder, G. J. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800904 · Cited by 834
BiCuSeO oxyselenides: new promising thermoelectric materials
Zhao, L.-D., He, J., Berardan, D., Lin, Y., Li, J.-F., Nan, C.-W., & Dragoe, N. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00997e · Cited by 722
Oh, J. Y., Lee, J. H., Han, S. W., Chae, S. S., Bae, E. J., Kang, Y. H., Choi, W. J., Cho, S. Y., Lee, J.-O., Baik, H. K., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03813h · Cited by 289
Metadata
- Authors
- Liu, W., Lukas, K. C., McEnaney, K., Lee, S., Zhang, Q., Opeil, C. P., Chen, G., & Ren, Z.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 6
- Issue
- 2
- Pages
- 552-560
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2036746022
- Cited by
- 310
- References
- 22
- FWCI
- 5.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Studies on the Bi2Te3–Bi2Se3–Bi2S3system for mid-temperature thermoelectric energy conversion. https://app.cochat.ai/papers/10.1039/c2ee23549h
- The paper
- Liu, W., Lukas, K. C., McEnaney, K., Lee, S., Zhang, Q., Opeil, C. P., Chen, G., & Ren, Z. (2013). Studies on the Bi2Te3–Bi2Se3–Bi2S3system for mid-temperature thermoelectric energy conversion. Energy Environ. Sci. https://doi.org/10.1039/c2ee23549h
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
