The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Low-temperature hydrothermal synthesis of WO3 nanorods and their sensing properties for NO2
Abstract
Tungsten trioxide (WO3) nanorods with an aspect ratio of ∼50 have been successfully synthesized by hydrothermal reaction at a low temperature of 100 °C. The crystal structure, morphology evolution and thermal stability of the products are characterized in detail by XRD, FESEM, FTIR, and TG/DTA techniques. The diameter evolution and distribution of WO3 nanorods strongly depend on hydrothermal temperature and time. Hydrothermal conditions of 100 °C and 24 h ensure the formation of well-defined WO3 nanorods. The transition of the crystal structure from monoclinic WO3 to hexagonal WO3 occurs after calcination at 400 °C. The appropriate calcination conditions of the WO3 nanorods are defined to be 600 °C and 4 h for gas-sensing applications. Response measurements reveal that the WO3 sensor operating at 200 °C exhibits high sensitivity to ppm-level NO2 and small cross-sensing to CO and CH4, which makes this kind of sensor a competitive candidate for NO2-sensing applications. Moreover, impedance measurements indicate that a conductivity mechanism of the sensor is mainly dependent on the grain boundaries of WO3 nanorods. A possible adsorption and reaction model is proposed to illustrate the gas-sensing mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured Tungsten Oxide – Properties, Synthesis, and Applications
Zheng, H., Ou, J. Z., Strano, M. S., Kaner, R. B., Mitchell, A., & Kalantar‐zadeh, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002477 · Cited by 1,479
Cited by
A review on WO3 based gas sensors: Morphology control and enhanced sensing properties
Dong, C., Zhao, R., Yao, L., Ran, Y., Zhang, X., & Wang, Y. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153194 · Cited by 434
Sensitive and selective NO2 gas sensor based on WO3 nanoplates
Shendage, S. S., Patil, V. L., Vanalakar, S. A., Patil, S. P., Harale, N. S., Bhosale, J. L., Kim, J. H., & Patil, P. S. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.08.177 · Cited by 431
Semiconducting Polymers for Oxygen Evolution Reaction under Light Illumination
Fang, Y., Hou, Y., Fu, X., & Wang, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00686 · Cited by 338
Zhu, W., Sun, F., Goei, R., & Zhou, Y. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.02.012 · Cited by 262
Metadata
- Authors
- Bai, S., Zhang, K., Luo, R., Li, D., Chen, A., & Liu, C. C.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 22
- Issue
- 25
- Pages
- 12643
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2089003679
- Cited by
- 226
- References
- 1
- FWCI
- 12.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.