The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Enhanced thermoelectric properties of Bi2(Te1−xSex)3-based compounds as n-type legs for low-temperature power generation
Abstract
The abundance of low-temperature waste heat necessitates the development of reliable and scalable thermal-to-electric energy conversion technology. The thermoelectric device is one viable option. Commercially available Bi2Te3-based materials are optimized for near room temperature cooling applications. Currently there are no mass-produced materials available for 400 K to 650 K thermoelectric power generation. We report the successful realization of high performance n-type Bi2(Te1−xSex)3-based materials for the temperature range of interest, using a commercial zone-melting technique. The introduction of Se effectively increases the band gap, which significantly suppresses the “turn-over” in Seebeck coefficient and the appearance of a pronounced bipolar effect, shifting the corresponding temperature of the optimum thermoelectric figure of merit ZT towards a higher temperature range. Furthermore, we demonstrate that the electron concentration of Bi2(Te0.5Se0.5)3 can be effectively adjusted by iodine doping. The samples with electron concentrations between 3 × 1019 and 4.5 × 1019 cm−3 display optimal thermoelectric performances. The highest ZT value reaches 0.86 at 600 K for the sample with the electron concentration of 4.0 × 1019 cm−3, whose average ZT between 400 K and 640 K is 0.8, making this scalable zone-melted low-Te content Bi2(Te0.5Se0.5)3 compound a promising candidate for low-temperature power generation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Topological insulators in Bi2Se3, Bi2Te3 and Sb2Te3 with a single Dirac cone on the surface
Zhang, H., Liu, C.-X., Qi, X.-L., Dai, X., Fang, Z., & Zhang, S.-C. (2009) · Nature Physics · doi:10.1038/nphys1270 · Cited by 6,359
Cited by
Compromise and Synergy in High‐Efficiency Thermoelectric Materials
Zhu, T., Liu, Y., Fu, C., Heremans, J. P., Snyder, J. G., & Zhao, X. (2017) · Advanced Materials · doi:10.1002/adma.201605884 · Cited by 1,616
The Thermoelectric Properties of Bismuth Telluride
Witting, I. T., Chasapis, T. C., Ricci, F., Peters, M., Heinz, N. A., Hautier, G., & Snyder, G. J. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800904 · Cited by 834
Hu, L., Wu, H., Zhu, T., Fu, C., He, J., Ying, P., & Zhao, X. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500411 · Cited by 492
Hong, M., Chasapis, T. C., Chen, Z.-G., Yang, L., Kanatzidis, M. G., Snyder, G. J., & Zou, J. (2016) · ACS Nano · doi:10.1021/acsnano.6b01156 · Cited by 385
Metadata
- Authors
- Wang, S., Tan, G., Xie, W., Zheng, G., Li, H., Yang, J., & Tang, X.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 22
- Issue
- 39
- Pages
- 20943
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2027958104
- Cited by
- 173
- References
- 1
- FWCI
- 3.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced thermoelectric properties of Bi2(Te1−xSex)3-based compounds as n-type legs for low-temperature power generation. https://app.cochat.ai/papers/10.1039/c2jm34608g
- The paper
- Wang, S., Tan, G., Xie, W., Zheng, G., Li, H., Yang, J., & Tang, X. (2012). Enhanced thermoelectric properties of Bi2(Te1−xSex)3-based compounds as n-type legs for low-temperature power generation. Journal of Materials Chemistry. https://doi.org/10.1039/c2jm34608g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.