The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Dispersion of alkylated graphene in organic solvents and its potential for lubrication applications
Abstract
We report on the preparation of alkylated graphenes on a large scale followed by their dispersion in organic solvents. The alkylated graphenes with variable alkyl chain lengths (Cn = 8, 12, 18) are prepared by coupling of alkylamine with carboxylic groups of graphene oxide (GrO). The FTIR, UV-Visible, and TGA results reveal that, during alkylation, the oxygen functionalities of GrO are reduced significantly and the average size of the sp2 carbon domain increased, which is further supported by Raman characteristics. It is observed that the dispersibility of alkylated graphene in hydrocarbon solvents increases on increasing the chain length of (a) hydrocarbon solvents used for the dispersion and (b) alkyl groups attached to the graphene. The van der Waals interaction between methylene units associated with alkylated graphenes and hydrocarbon solvents plays a crucial role in determining their dispersion characteristics, and such an interaction increases with increasing methylene units. Octadecylamine functionalized graphene (ODA-Gr) dispersion in hexadecane is found to have long-term dispersion stability due to its high degree of cohesive interaction. The lubrication characteristics of hexadecane containing ODA-Gr were probed by evaluating its friction and wear properties. The results reveal that hexadecane doped with an optimized dose of 0.06 mg mL−1 ODA-Gr reduced friction and wear by 26% and 9%, respectively, compared to hexadecane. The lubricity enhancement could be attributed to uninterrupted supplies of graphene nanosheets under the rubbing surfaces, where these nanosheets prevent direct contact between the rubbing surfaces, providing low resistance to shear.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Cited by
Few layer graphene to reduce wear and friction on sliding steel surfaces
Berman, D., Erdemir, A., & Sumant, A. V. (2013) · Carbon · doi:10.1016/j.carbon.2012.11.061 · Cited by 721
Reduced wear and friction enabled by graphene layers on sliding steel surfaces in dry nitrogen
Berman, D., Erdemir, A., & Sumant, A. V. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.006 · Cited by 493
Superlubricity of carbon nanostructures
Chen, X., & Li, J. (2020) · Carbon · doi:10.1016/j.carbon.2019.11.077 · Cited by 264
Mungse, H. P., & Khatri, O. P. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5033614 · Cited by 257
Self-citationBhaumik, S., Pathak, S. D., Dey, S., & Datta, S. (2019) · Tribology International · doi:10.1016/j.triboint.2019.06.006 · Cited by 68
Metadata
- Authors
- Choudhary, S., Mungse, H. P., & Khatri, O. P.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 22
- Issue
- 39
- Pages
- 21032
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2043019703
- Cited by
- 256
- References
- 1
- FWCI
- 24.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.